test(mcp): покрыть write-safe-point «после Stop новая запись не стартует» (#487, F4)

paginate-abort-safepoint покрывал только READ-safe-point; WRITE-шов
(collaboration.mutatePageContent / context.mutateLiveContentUnlocked —
signal?.throwIfAborted() перед session.mutate) был без теста. Добавляю
мок-collab юнит через тест-сим __setCollabProviderFactory (фейковый провайдер
с мгновенным onSynced): предварительно abort-нутый сигнал → оба шва реджектят
ДО session.mutate, трансформ не вызывается; контрольные кейсы (живой сигнал)
подтверждают, что session.mutate достижим.

MUTATION-VERIFY: снятие throwIfAborted в обоих швах делает красными ровно два
abort-кейса, контрольные остаются зелёными.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

.env.example

@@ -124,6 +124,40 @@ MCP_DOCMOST_PASSWORD=
 # MCP_TOKEN=
 # MCP_SESSION_IDLE_MS=1800000
 #
+# --- MCP collaboration write path: concurrency + rights-staleness (#449) ------
+# MCP content writes (update_page, insert/replace nodes, comments-in-body, etc.)
+# go over the collaboration websocket and are serialized PER PAGE by an
+# in-process mutex (a module-level Map, one promise-chain per page UUID). This
+# guarantees no two MCP writes on the SAME page overlap and clobber each other.
+#
+# DEPLOY REQUIREMENT — SINGLE INSTANCE or STICKY SESSIONS. The mutex is
+# process-local. Behind a multi-replica load balancer WITHOUT sticky sessions,
+# two replicas can each "hold" the lock for the same page at the same time and
+# serialization is silently lost (concurrent full-document writes race on the
+# live Yjs fragment). Run the MCP/app as a SINGLE instance, OR pin a page's
+# traffic to one replica (sticky sessions / consistent hashing on page id). The
+# same constraint applies to the RAM-only stash_page blob store above. There is
+# deliberately no cross-process (e.g. Postgres advisory) lock yet — this is a
+# CONSCIOUS documented constraint, not an oversight (#449).
+#
+# To reduce connect-storms the write path caches ONE live collab session per
+# (wsUrl, page, token). Tunables (all optional; defaults are safe):
+# MCP_COLLAB_SESSION_IDLE_MS=60000     # idle TTL, reset per op; 0 disables cache
+# MCP_COLLAB_SESSION_MAX_ENTRIES=32    # LRU cap on cached sessions
+# MCP_COLLAB_TOKEN_TTL_MS=300000       # per-client collab-token cache (5 min)
+#
+# RIGHTS-STALENESS TRADE-OFF. A cached collab session writes under the token
+# captured at CONNECT time, and the collab-token cache reuses a token for its TTL.
+# So if a user's access to a page is REVOKED, MCP writes on an already-open
+# session may keep succeeding until the session ages out. MCP_COLLAB_SESSION_MAX_AGE_MS
+# is the HARD lifetime (checked at each acquire) that BOUNDS this window: after it,
+# the session is torn down and the next write re-auths with a fresh token, picking
+# up the revocation. Default 10 min. LOWER it to shorten the revocation lag at the
+# cost of more reconnects; RAISE it to reduce reconnects at the cost of a longer
+# stale-rights window. There is intentionally no push-based cache invalidation on
+# a rights change — this bounded window is the accepted trade-off (#449).
+# MCP_COLLAB_SESSION_MAX_AGE_MS=600000
+#
 # BLOB SANDBOX (stash_page). An in-RAM, process-local store that hands large page
 # content + images to an external consumer WITHOUT bloating the model context or
 # requiring Docmost auth. The stash_page tool serializes a page, mirrors its
@@ -191,16 +225,91 @@ MCP_DOCMOST_PASSWORD=
 
 # Silence timeout (ms) for EXTERNAL-MCP transport ONLY (not the chat provider).
 # Tighter than AI_STREAM_TIMEOUT_MS so a byte-silent/hung MCP server is broken in
-# ~5 min instead of 15. Note it also cuts a legitimately long but byte-silent
+# ~1 min instead of 15. Note it also cuts a legitimately long but byte-silent
 # single tool call (a slow crawl that emits nothing until done) and an SSE
-# transport idling >5 min BETWEEN tool calls. Default 300000 (5 min).
-# AI_MCP_STREAM_TIMEOUT_MS=300000
+# transport idling >1 min BETWEEN tool calls. Default 60000 (1 min).
+# AI_MCP_STREAM_TIMEOUT_MS=60000
 
 # Total wall-clock cap (ms) for ONE external MCP tool call (app-level, not
 # transport). Aborts a tool that keeps the socket warm (SSE heartbeats / trickle)
 # but never returns a result — which the silence timeout above never breaks.
-# Default 900000 (15 min).
-# AI_MCP_CALL_TIMEOUT_MS=900000
+# Default 120000 (2 min).
+# AI_MCP_CALL_TIMEOUT_MS=120000
+
+# Max JSON/urlencoded request body size (bytes). Fastify's 1 MiB default is too
+# small for a long AI-chat research turn: the client resends the FULL message
+# history (every tool call + search result) on each turn, so a deep conversation's
+# POST to /api/ai-chat/stream can be several MB and would otherwise be rejected
+# with FST_ERR_CTP_BODY_TOO_LARGE (413). Does NOT affect multipart file uploads
+# (see FILE_UPLOAD_SIZE_LIMIT). Default 26214400 (25 MiB).
+# HTTP_JSON_BODY_LIMIT=26214400
+
+# Deferred tool loading for the in-app AI chat (#332). Default ON: the agent sees
+# a compact <tool_catalog> and only CORE tools + a loadTools meta-tool are active
+# each step; deferred tools (the fat/rare ones + all external MCP tools) load on
+# demand. Set AI_CHAT_DEFERRED_TOOLS=false to restore the old "all tools always
+# active" behavior.
+# AI_CHAT_DEFERRED_TOOLS=true
+
+# Final-step lockdown for the in-app agent loop (#444). Default OFF. When ON
+# (legacy), the LAST allowed step forces a text-only answer: the model's tools are
+# stripped (toolChoice=none) and a synthesis instruction is appended. That
+# tool-stripping caused a token-degeneration incident — robbed of its tools on the
+# final step mid-work, the model emitted a ~255KB block repeating a single token —
+# so the default is now OFF: the last step keeps its tools and gets only a SOFT
+# nudge to finish with a text summary, and a token-degeneration detector is the
+# universal anti-babble guard. Enable this ONLY for a model that reliably ends its
+# turns with a clear text answer.
+# AI_CHAT_FINAL_STEP_LOCKDOWN=false
+
+# --- Autonomous / detached agent runs (settings.ai.autonomousRuns) ---
+# Opt-in per workspace (AI settings; off by default). When on, a chat turn becomes
+# a server-side RUN that survives a browser disconnect — only an explicit Stop ends
+# it, and a client reconnects/live-follows the run.
+#
+# DEPLOY CONSTRAINT — SINGLE-INSTANCE ONLY in phase 1: Stop and the in-process
+# AbortController that backs it are process-local, so a Stop only aborts a run
+# executing on the SAME replica that owns it (cross-instance pub/sub stop is phase
+# 2 and not yet reliable). Do NOT enable autonomousRuns on a horizontally-scaled
+# deployment (multiple replicas behind a load balancer, or Docmost cloud
+# CLOUD=true) — run a single instance instead. The server logs a startup WARNING
+# when it detects a multi-instance deployment (CLOUD=true) so the constraint is
+# visible, and a startup sweep settles any run left dangling by a restart.
+#
+# Resumable run streams (#184 phase 1.5, #381). With the flag ON, an active
+# durable run tees its SSE frames into an in-memory registry, and a
+# reloaded/second tab attaches via GET /ai-chat/runs/:chatId/stream to follow the
+# run LIVE (replay of the buffered frames + the live tail). With the flag OFF
+# (default) the registry is never populated and attach always answers 204, so a
+# reopened tab of an active run silently falls back to degraded 2.5s history
+# polling — every wire path stays byte-for-byte identical to a build without the
+# feature. Staged-rollout switch: only meaningful when autonomousRuns (above) is
+# enabled for a workspace, and the same single-instance constraint applies (the
+# registry is process-local).
+# AI_CHAT_RESUMABLE_STREAM=false
+
+# --- Run lifecycle tunables (#487) ---
+# These govern the universal run machinery (every turn is now a first-class run,
+# both modes) and rarely need changing.
+#
+# How long a server-side SUPERSEDE ("interrupt and send now") waits for the target
+# run to settle after issuing Stop before it degrades to a 409 SUPERSEDE_TIMEOUT
+# (nothing sent, the composer keeps the user's text). 10s is generous under a
+# healthy DB; do NOT raise it to paper over a slow DB — a SUPERSEDE_TIMEOUT is the
+# honest signal. Default 10000 (10s).
+# AI_CHAT_SUPERSEDE_TIMEOUT_MS=10000
+#
+# How often the periodic bidirectional reconcile job runs (heals runs/messages
+# left dangling by a crash or a lost terminal write). Default 120000 (2 min).
+# AI_CHAT_RECONCILE_INTERVAL_MS=120000
+#
+# Wall-clock cap for a SINGLE in-app tool call (a long paginated read, or a content
+# write whose collab commit hangs) — the per-call half of the composite abort
+# signal every in-app tool is wrapped with (the other half is the turn's Stop).
+# The reconcile staleness floor is derived as max(2 x this cap, 15min), so a very
+# high value delays stale-run recovery (the server boot-warns above 30min). Default
+# 120000 (2 min).
+# AI_CHAT_INAPP_TOOL_CALL_CAP_MS=120000
 
 # --- Anonymous public-share AI assistant ---
 # Opt-in per workspace (AI settings -> "public share assistant"; off by default).
@@ -235,3 +344,41 @@ MCP_DOCMOST_PASSWORD=
 # FAILS CLOSED if Redis is unavailable (default: 1,000,000 tokens per workspace
 # per rolling day).
 # SHARE_AI_WORKSPACE_TOKEN_BUDGET_PER_DAY=1000000
+
+# --- Observability / perf metrics (#355) ---
+#
+# Two INDEPENDENT toggles, both OFF by default:
+#
+# 1) METRICS_PORT — the server-side Prometheus scrape endpoint.
+#    UNSET (default) => the whole prom subsystem is OFF: no registry, no
+#    collectors, and NOTHING is exposed on the main app port. There is NO
+#    default port — leaving it blank disables it. When set to a port (e.g.
+#    9464), a SEPARATE bare node:http listener serves GET /metrics on that port
+#    only (never on the main :3000 app listener), for a scraper such as
+#    VictoriaMetrics/Prometheus reaching it as <host>:<port>/metrics.
+# METRICS_PORT=9464
+#
+#    METRICS_BIND — interface the /metrics listener binds to. DEFAULT 127.0.0.1
+#    (loopback only), so the unauthenticated endpoint is NOT exposed on all
+#    interfaces. If the scraper runs in a SEPARATE container and reaches this as
+#    docmost:9464, set METRICS_BIND=0.0.0.0 — but then also set METRICS_TOKEN
+#    and/or keep the port on a private network, since /metrics is otherwise open.
+# METRICS_BIND=127.0.0.1
+#
+#    METRICS_TOKEN — optional Bearer token guarding /metrics. When set, every
+#    scrape MUST send `Authorization: Bearer <token>` (others get 401). Configure
+#    the scraper with the same bearer token (e.g. VictoriaMetrics/vmagent
+#    `bearer_token`, Prometheus `authorization.credentials`). Leave unset only
+#    when the endpoint is bound to loopback or an otherwise-trusted network.
+# METRICS_TOKEN=
+#
+# 2) CLIENT_TELEMETRY_ENABLED — the public client perf-telemetry sink.
+#    OFF by default. When true, the unauthenticated POST /api/telemetry/vitals
+#    endpoint is registered and browsers collect + send web-vitals / editor
+#    metrics into the `client_metrics` table (read directly by Grafana, separate
+#    from METRICS_PORT). Leave OFF unless you actually consume this data: the
+#    endpoint is public and the table has NO app-side retention, so enabling it
+#    requires an EXTERNAL pruner to bound `client_metrics` growth (the deployed
+#    infra prunes rows >90d via a maintenance container). When off, the endpoint
+#    does not exist and the client installs no observers.
+# CLIENT_TELEMETRY_ENABLED=false

.github/workflows/develop.yml

@@ -18,12 +18,48 @@ env:
   IMAGE: ghcr.io/vvzvlad/gitmost
 
 jobs:
-  # Run the reusable test suite first so a failing test blocks the image build.
+  # Run the reusable test suite. Together with the e2e jobs below it gates the
+  # publish job (the image push), not the build itself — build runs in parallel.
   test:
     uses: ./.github/workflows/test.yml
 
+  # Runs in parallel with the test/e2e jobs and only warms the buildx cache
+  # (GHA cache, scope develop-amd64). No push happens here — the publish job
+  # below is the only one that pushes the image.
   build:
-    needs: test
+    runs-on: ubuntu-latest
+    timeout-minutes: 30
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+
+      - name: Resolve version
+        id: version
+        run: echo "value=$(git describe --tags --always)" >> "$GITHUB_OUTPUT"
+
+      - name: Build develop image (warm cache, no push)
+        uses: docker/build-push-action@v6
+        with:
+          context: .
+          platforms: linux/amd64
+          build-args: |
+            APP_VERSION=${{ steps.version.outputs.value }}
+            AI_AGENT_ROLES_CATALOG_URL=https://raw.githubusercontent.com/vvzvlad/gitmost/develop/agent-roles-catalog
+          push: false
+          cache-from: type=gha,scope=develop-amd64
+          cache-to: type=gha,scope=develop-amd64,mode=max,ignore-error=true
+
+  # The gate: rebuilds from the cache the build job just wrote (near-instant on
+  # a cache hit; worst case — cache eviction — a full rebuild, which matches the
+  # old sequential timing) and pushes :develop only when unit tests AND both
+  # e2e suites AND the build are green.
+  publish:
+    needs: [test, e2e-server, e2e-mcp, build]
     runs-on: ubuntu-latest
     timeout-minutes: 30
     steps:
@@ -57,13 +93,10 @@ jobs:
           push: true
           tags: ${{ env.IMAGE }}:develop
           cache-from: type=gha,scope=develop-amd64
-          cache-to: type=gha,scope=develop-amd64,mode=max,ignore-error=true
 
-  # e2e jobs run on every develop push but DO NOT gate the build/publish above:
-  # `build` stays `needs: test` only, so the :develop image still ships even if
-  # e2e fails. A failing e2e job turns the run red and triggers GitHub's email
-  # to the pusher — that red run + email is the intended notification, not a
-  # deploy block.
+  # e2e jobs gate the publish (image push), not the build: the :develop image
+  # is pushed only when unit tests AND both e2e suites pass (publish.needs
+  # lists them all).
   e2e-server:
     runs-on: ubuntu-latest
     # Hard cap: the full-AppModule e2e leaks open handles and hung jest to the 6h max.
@@ -118,15 +151,25 @@ jobs:
       - name: Build editor-ext
         run: pnpm --filter @docmost/editor-ext build
 
+      # @docmost/prosemirror-markdown is an ESM workspace package the server
+      # imports at runtime; its build/ is gitignored and test:e2e has no pretest
+      # hook, so build it before the e2e run (mirrors the test.yml job).
+      - name: Build prosemirror-markdown
+        run: pnpm --filter @docmost/prosemirror-markdown build
+
+      # docmost-client.loader.ts type-imports from @docmost/mcp (issue #446); its
+      # build/ is gitignored and `test:e2e` type-checks, so build it here or tsc
+      # fails with TS2307 (mirrors the e2e-mcp / mcp-server-parity jobs).
+      - name: Build mcp
+        run: pnpm --filter @docmost/mcp build
+
       - name: Run migrations
         run: pnpm --filter ./apps/server migration:latest
 
       - name: Run server e2e
         run: pnpm --filter ./apps/server test:e2e
 
-  # Same rationale as e2e-server: this job is intentionally NOT in
-  # `build.needs`. Deploy of the :develop image must not be blocked by e2e;
-  # a red run plus GitHub's email to the pusher is the notification mechanism.
+  # Gates the publish too — see the comment above e2e-server.
   e2e-mcp:
     runs-on: ubuntu-latest
     timeout-minutes: 20

.github/workflows/nightly-property.yml

@@ -0,0 +1,224 @@
+name: Nightly property fuzz
+
+# The daily heavy property run for the ProseMirror<->Markdown converter
+# (packages/prosemirror-markdown). The PR/CI test run keeps NUM_RUNS modest to
+# stay under budget; this cron cranks up total coverage with random seeds to hunt
+# for deeper round-trip counterexamples than a fixed-seed PR run can reach.
+#
+# WHY SHARDING: a single mega-run (~10000 fast-check runs) OOMs the vitest worker
+# (empirically ~1625 runs -> "JS heap out of memory", ~2GB) because heap
+# accumulates across the whole property run in one process. Instead this job runs
+# SHARDS fresh vitest processes, each a MODERATE per-shard count with a DISTINCT
+# derived seed, so total coverage ~= SHARDS x PER_SHARD_NUM_RUNS across processes
+# that never accumulate heap. On the first failing shard we stop and keep that
+# shard's output for triage.
+#
+# Counterexample -> fixture workflow: when a shard fails, fast-check prints the
+# SHRUNK minimal counterexample plus the reproducing seed. This job files a Gitea
+# issue containing that seed + counterexample ONLY when the output actually holds
+# a fast-check counterexample; an infra failure (OOM/tsc/install, no
+# counterexample) is filed under a DISTINCT title so it can never poison the
+# counterexample dedup. A human then commits the shrunk doc as a PERMANENT fixture
+# under packages/prosemirror-markdown/test/fixtures/counterexamples/ with a case in
+# counterexamples.test.ts, and FIXES the converter (never weakens a property to
+# hide the bug). See packages/prosemirror-markdown/README.md.
+
+on:
+  schedule:
+    # 03:00 UTC daily.
+    - cron: '0 3 * * *'
+  workflow_dispatch:
+    inputs:
+      num_runs:
+        description: 'fast-check runs PER SHARD (8 shards run in sequence)'
+        required: false
+        default: '600'
+      seed:
+        description: 'base fast-check seed (empty = random); shard i uses base+i'
+        required: false
+        default: ''
+
+permissions:
+  contents: read
+  issues: write
+
+jobs:
+  property-fuzz:
+    runs-on: ubuntu-latest
+    timeout-minutes: 60
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Set up pnpm
+        uses: pnpm/action-setup@v4
+
+      - name: Set up Node
+        uses: actions/setup-node@v4
+        with:
+          node-version: 22
+          cache: pnpm
+
+      - name: Install dependencies
+        run: pnpm install --frozen-lockfile
+
+      # No build step: the generative suite imports the converter from src/
+      # directly (e.g. `from '../../src/lib/markdown-converter.js'`), so it runs
+      # against source without the package's build/. Skipping the build also
+      # keeps a tsc build error from masquerading as a property-test failure and
+      # filing a bogus counterexample issue.
+      - name: Resolve base seed and per-shard run count
+        id: params
+        # Dispatch inputs are read via env (NOT interpolated into the shell body)
+        # to avoid script injection through a crafted input value.
+        env:
+          SEED_INPUT: ${{ inputs.seed }}
+          NUM_RUNS_INPUT: ${{ inputs.num_runs }}
+        run: |
+          set -euo pipefail
+          SEED="${SEED_INPUT:-}"
+          # Empty seed (cron, or a dispatch that left it blank) -> random. Combine
+          # two RANDOMs so the seed spans more than RANDOM's 0..32767 range.
+          [ -z "$SEED" ] && SEED=$(( (RANDOM << 15) | RANDOM ))
+          NUM_RUNS="${NUM_RUNS_INPUT:-}"
+          [ -z "$NUM_RUNS" ] && NUM_RUNS=600
+          echo "seed=$SEED" >> "$GITHUB_OUTPUT"
+          echo "num_runs=$NUM_RUNS" >> "$GITHUB_OUTPUT"
+          echo "Sharded property fuzz: BASE_SEED=$SEED PER_SHARD_NUM_RUNS=$NUM_RUNS SHARDS=8"
+
+      - name: Run generative property suite (sharded)
+        id: fuzz
+        env:
+          BASE_SEED: ${{ steps.params.outputs.seed }}
+          PER_SHARD_NUM_RUNS: ${{ steps.params.outputs.num_runs }}
+          SHARDS: '8'
+        run: |
+          set -uo pipefail
+          # Give each fresh process headroom, but rely on SHARDING (not a big heap)
+          # to avoid OOM: a moderate per-shard count in a process that starts clean.
+          export NODE_OPTIONS=--max-old-space-size=4096
+          : > property-output.txt
+          FAILED=0
+          FAIL_SEED=""
+          i=0
+          while [ "$i" -lt "$SHARDS" ]; do
+            SHARD_SEED=$(( BASE_SEED + i ))
+            echo "=== shard $((i + 1))/$SHARDS: PROPERTY_SEED=$SHARD_SEED PROPERTY_NUM_RUNS=$PER_SHARD_NUM_RUNS ==="
+            # tee OVERWRITES property-output.txt each shard; since we break on the
+            # first failure, the file ends up holding exactly the failing shard's
+            # output (which carries the shrunk counterexample + reproducing seed).
+            if PROPERTY_SEED="$SHARD_SEED" PROPERTY_NUM_RUNS="$PER_SHARD_NUM_RUNS" \
+                pnpm --filter @docmost/prosemirror-markdown exec \
+                  vitest run test/generative/ 2>&1 | tee property-output.txt; then
+              echo "shard $((i + 1)) passed"
+            else
+              echo "shard $((i + 1)) FAILED (seed=$SHARD_SEED) — stopping; keeping its output"
+              FAILED=1
+              FAIL_SEED="$SHARD_SEED"
+              break
+            fi
+            i=$(( i + 1 ))
+          done
+          echo "failed=$FAILED" >> "$GITHUB_OUTPUT"
+          echo "fail_seed=$FAIL_SEED" >> "$GITHUB_OUTPUT"
+          exit "$FAILED"
+
+      # A GENUINE counterexample: fast-check printed a shrunk minimal case and its
+      # reproducing seed into property-output.txt. File a dedup-guarded issue whose
+      # title prefix is UNIQUE to counterexamples, so an infra failure (handled by
+      # the next step under a different title) can never poison this dedup.
+      - name: File counterexample issue
+        # always() is REQUIRED: the fuzz step exits nonzero on a failing shard,
+        # so a bare `if:` (implicitly success() && ...) would skip this step
+        # exactly when it must run. always() lets it run on the failure path.
+        if: always() && steps.fuzz.outputs.failed == '1'
+        env:
+          FAIL_SEED: ${{ steps.fuzz.outputs.fail_seed }}
+          NUM_RUNS: ${{ steps.params.outputs.num_runs }}
+          RUN_URL: ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          TITLE_PREFIX: 'Nightly property counterexample'
+        run: |
+          set -uo pipefail
+          # Discriminate counterexample vs infra failure by the fast-check
+          # signature. No signature -> leave it to the infra-failure step.
+          if ! grep -Eq 'Property failed after|Counterexample' property-output.txt; then
+            echo "No fast-check counterexample signature — infra failure, handled by the next step."
+            exit 0
+          fi
+          TITLE="${TITLE_PREFIX} (seed=${FAIL_SEED})"
+
+          # Best-effort dedup: skip if an open issue with the counterexample title
+          # prefix already exists. A failure of this check must NOT block creation.
+          EXISTING=""
+          if EXISTING=$(curl -sS \
+              -H "Authorization: token ${GITHUB_TOKEN}" \
+              "${GITHUB_API_URL}/repos/${GITHUB_REPOSITORY}/issues?state=open&limit=100"); then
+            if printf '%s' "$EXISTING" \
+                | node -e 'let s="";process.stdin.on("data",d=>s+=d).on("end",()=>{let a;try{a=JSON.parse(s)}catch{process.exit(1)}if(!Array.isArray(a))process.exit(1);const p=process.env.TITLE_PREFIX;process.exit(a.some(i=>typeof i.title==="string"&&i.title.startsWith(p))?0:1)})'; then
+              echo "An open '${TITLE_PREFIX}' issue already exists — skipping creation."
+              exit 0
+            fi
+          fi
+
+          # Build the JSON body with the test output SAFELY escaped (never hand-
+          # interpolate the counterexample into JSON).
+          BODY_TEXT=$(printf 'A nightly property fuzz SHARD failed with a fast-check counterexample.\n\n- failing shard seed: `%s`\n- NUM_RUNS (per shard): `%s`\n- run: %s\n\nReproduce locally:\n\n```\nPROPERTY_SEED=%s PROPERTY_NUM_RUNS=%s pnpm --filter @docmost/prosemirror-markdown exec vitest run test/generative/\n```\n\nfast-check shrinks the failure to a minimal counterexample. Commit it as a permanent fixture under `packages/prosemirror-markdown/test/fixtures/counterexamples/` + a case in `counterexamples.test.ts`, then FIX the converter (do not weaken a property). See `packages/prosemirror-markdown/README.md`.\n\nTail of the test output (contains the shrunk counterexample):\n\n```\n%s\n```\n' \
+            "$FAIL_SEED" "$NUM_RUNS" "$RUN_URL" "$FAIL_SEED" "$NUM_RUNS" "$(tail -n 120 property-output.txt)")
+
+          jq -n --arg title "$TITLE" --arg body "$BODY_TEXT" \
+            '{title: $title, body: $body}' > payload.json
+
+          curl -sS -X POST \
+            "${GITHUB_API_URL}/repos/${GITHUB_REPOSITORY}/issues" \
+            -H "Authorization: token ${GITHUB_TOKEN}" \
+            -H 'Content-Type: application/json' \
+            -d @payload.json
+
+      # An INFRA failure (OOM, tsc, install) has NO counterexample signature. File
+      # it under a DISTINCT title so it is visible but keeps the counterexample
+      # dedup (above) uncontaminated — a real counterexample can still file even
+      # while an infra issue is open.
+      - name: File infra failure issue
+        # always() is REQUIRED: the fuzz step exits nonzero on a failing shard,
+        # so a bare `if:` (implicitly success() && ...) would skip this step
+        # exactly when it must run. always() lets it run on the failure path.
+        if: always() && steps.fuzz.outputs.failed == '1'
+        env:
+          FAIL_SEED: ${{ steps.fuzz.outputs.fail_seed }}
+          NUM_RUNS: ${{ steps.params.outputs.num_runs }}
+          RUN_URL: ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          TITLE_PREFIX: 'Nightly property run infra failure'
+        run: |
+          set -uo pipefail
+          # Only file when there is NO counterexample signature (else the
+          # counterexample step owns it).
+          if grep -Eq 'Property failed after|Counterexample' property-output.txt; then
+            echo "Counterexample present — owned by the counterexample step."
+            exit 0
+          fi
+          TITLE="${TITLE_PREFIX} (seed=${FAIL_SEED})"
+
+          EXISTING=""
+          if EXISTING=$(curl -sS \
+              -H "Authorization: token ${GITHUB_TOKEN}" \
+              "${GITHUB_API_URL}/repos/${GITHUB_REPOSITORY}/issues?state=open&limit=100"); then
+            if printf '%s' "$EXISTING" \
+                | node -e 'let s="";process.stdin.on("data",d=>s+=d).on("end",()=>{let a;try{a=JSON.parse(s)}catch{process.exit(1)}if(!Array.isArray(a))process.exit(1);const p=process.env.TITLE_PREFIX;process.exit(a.some(i=>typeof i.title==="string"&&i.title.startsWith(p))?0:1)})'; then
+              echo "An open '${TITLE_PREFIX}' issue already exists — skipping creation."
+              exit 0
+            fi
+          fi
+
+          BODY_TEXT=$(printf 'A nightly property fuzz SHARD failed WITHOUT a fast-check counterexample (infra failure: OOM / build / install). This is NOT a converter round-trip bug.\n\n- failing shard seed: `%s`\n- NUM_RUNS (per shard): `%s`\n- run: %s\n\nInvestigate the run log (memory, dependency install, or a tsc/import error). The nightly counterexample dedup is intentionally separate from this issue.\n\nTail of the test output:\n\n```\n%s\n```\n' \
+            "$FAIL_SEED" "$NUM_RUNS" "$RUN_URL" "$(tail -n 120 property-output.txt)")
+
+          jq -n --arg title "$TITLE" --arg body "$BODY_TEXT" \
+            '{title: $title, body: $body}' > payload.json
+
+          curl -sS -X POST \
+            "${GITHUB_API_URL}/repos/${GITHUB_REPOSITORY}/issues" \
+            -H "Authorization: token ${GITHUB_TOKEN}" \
+            -H 'Content-Type: application/json' \
+            -d @payload.json

.github/workflows/test.yml

@@ -1,5 +1,13 @@
 name: Test
 
+# NO `paths:` filter on purpose (issue #447). The tool-spec REGISTRY is split
+# across two packages that MUST stay in sync: the specs live in `packages/mcp`
+# but the parity/tier guard tests that read them live in the `apps/server` jest
+# suite. A PR touching only `packages/mcp/**` must therefore still run the SERVER
+# suite (and vice-versa), or an in-app wiring break slips through green and only
+# surfaces on develop after merge. The `test` job below runs BOTH suites via
+# `pnpm -r test` on every PR; the dedicated `mcp-server-parity` job makes that
+# cross-package gate explicit and fast. Do not add a `paths:` filter here.
 on:
   pull_request:
   workflow_call:
@@ -13,6 +21,49 @@ permissions:
   contents: read
 
 jobs:
+  # Guard against a long-lived branch adding a migration whose timestamped
+  # filename sorts BEFORE migrations already applied on the target branch (and
+  # thus in prod). The Kysely startup migrator rejects that as "corrupted
+  # migrations" and crash-loops the app on boot (incident #361). This gate fails
+  # the PR so the migration is renamed to a current timestamp before merge. Only
+  # runs for pull_request events (needs a base branch to diff against).
+  migration-order:
+    if: github.event_name == 'pull_request'
+    runs-on: ubuntu-latest
+    timeout-minutes: 5
+    steps:
+      - name: Checkout (full history for the base-branch diff)
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+      - name: Added migrations must sort after the newest on the base branch
+        env:
+          TARGET_BRANCH: ${{ github.base_ref }}
+        run: |
+          set -euo pipefail
+          MIG_DIR="apps/server/src/database/migrations"
+          # checkout above already did fetch-depth:0 (full history). Fetch the base
+          # WITHOUT --depth (a shallow graft would truncate the base history and
+          # break the merge-base when the base has moved ahead of the PR merge —
+          # exactly the long-branch-vs-moving-base case this gate guards, #361).
+          git fetch --no-tags origin "$TARGET_BRANCH"
+          newest_on_target=$(git ls-tree -r --name-only "origin/${TARGET_BRANCH}" "$MIG_DIR" | sort | tail -1)
+          # NO `|| true`: a diff failure (e.g. an unresolved merge-base) must fail
+          # the job CLOSED — a gate whose job is to BLOCK must never pass on error.
+          # `set -e` above already aborts on a non-zero diff exit.
+          added=$(git diff --diff-filter=A --name-only "origin/${TARGET_BRANCH}...HEAD" -- "$MIG_DIR")
+          bad=0
+          for f in $added; do
+            if [[ "$f" < "$newest_on_target" || "$f" == "$newest_on_target" ]]; then
+              echo "::error::Migration $f sorts at or before the newest on ${TARGET_BRANCH} ($newest_on_target) — rename it with a CURRENT timestamp before merge (do not change its contents). See incident #361."
+              bad=1
+            fi
+          done
+          if [ "$bad" -eq 0 ]; then
+            echo "Migration order OK (added migrations all sort after $newest_on_target)."
+          fi
+          exit $bad
+
   test:
     runs-on: ubuntu-latest
     timeout-minutes: 20
@@ -89,3 +140,53 @@ jobs:
       # isolated `docmost_test` DB and migrates it to latest.
       - name: Run server integration tests
         run: pnpm --filter server test:int
+
+  # Cross-package tool-spec parity gate (issue #447). The tool-spec registry lives
+  # in `packages/mcp` but its parity/tier guard tests live in the `apps/server`
+  # jest suite, so a PR touching ONLY one of the two packages must still run BOTH
+  # sides — otherwise an in-app wiring break (e.g. PR #434 drawio) passes the mcp
+  # suite green and only surfaces on develop after merge. The `test` job already
+  # runs everything via `pnpm -r test`; this job is a fast, explicitly-named guard
+  # that runs the mcp `node --test` suite AND the server tool-guard jest specs
+  # together, so the coupling is visible and can never be accidentally split by a
+  # path filter. No Postgres/Redis needed: these specs mock the DB/loader.
+  mcp-server-parity:
+    runs-on: ubuntu-latest
+    timeout-minutes: 15
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Set up pnpm
+        uses: pnpm/action-setup@v4
+
+      - name: Set up Node
+        uses: actions/setup-node@v4
+        with:
+          node-version: 22
+          cache: pnpm
+
+      - name: Install dependencies
+        run: pnpm install --frozen-lockfile
+
+      # Shared deps first (build/ dirs are gitignored; see test.yml build order).
+      - name: Build editor-ext
+        run: pnpm --filter @docmost/editor-ext build
+
+      - name: Build prosemirror-markdown
+        run: pnpm --filter @docmost/prosemirror-markdown build
+
+      # Build the mcp package so build/ carries a FRESH REGISTRY_STAMP (#447): the
+      # build runs gen-registry-stamp.mjs before tsc, so a build/ vs src/ skew
+      # cannot slip into the tests that exercise the loader's stale-check.
+      - name: Build mcp (regenerates REGISTRY_STAMP)
+        run: pnpm --filter @docmost/mcp build
+
+      # mcp side: the standalone MCP server's own tool-spec / instructions guards.
+      - name: Run mcp tool-spec suite
+        run: pnpm --filter @docmost/mcp test
+
+      # server side: the parity + tier guards that read packages/mcp/src/tool-specs
+      # and assert the in-app AI-chat wiring matches it.
+      - name: Run server tool-spec guard specs
+        run: pnpm --filter server exec jest shared-tool-specs.contract tool-tiers ai-chat-tools.service --runInBand

.gitignore

@@ -2,6 +2,11 @@
 .env.dev
 .env.prod
 data
+# Exception: the committed draw.io shape catalog (issue #424) lives in a `data/`
+# dir, but the bare `data` ignore above is meant for runtime state, not this
+# bundled build asset. Re-include the directory and its contents.
+!packages/mcp/data/
+!packages/mcp/data/**
 # compiled output
 /dist
 node_modules
@@ -19,6 +24,11 @@ packages/prosemirror-markdown/build/
 # markdown convention; the package is private and rebuilt at deploy.
 packages/mcp/build/
 
+# mcp REGISTRY_STAMP codegen output (issue #447). Regenerated into src/ by
+# scripts/gen-registry-stamp.mjs on every `build`/`pretest` (before tsc), so it
+# is a build artifact like build/ — never committed, always fresh.
+packages/mcp/src/registry-stamp.generated.ts
+
 # Logs
 logs
 *.log

.vscode/tasks.json

@@ -3,9 +3,9 @@
   "version": "2.0.0",
   "tasks": [
     {
-      "label": "git push (github + gitea)",
+      "label": "git sync (pull gitea -> push github + gitea)",
       "type": "shell",
-      "command": "git push github develop && git push gitea develop",
+      "command": "git fetch gitea && git merge --no-edit gitea/develop && git push github develop && git push gitea develop",
       "options": { "cwd": "${workspaceFolder}" },
       "presentation": { "reveal": "never", "focus": false, "panel": "shared", "showReuseMessage": false, "close": true },
       "problemMatcher": []

AGENTS.md

@@ -5,6 +5,139 @@ repository. It has two layers: **how to run a task end-to-end** (the
 sections below), and **how the codebase is built** (the technical sections
 further down, formerly in `CLAUDE.md`).
 
+## ARCHITECTURAL INVARIANTS — NON-NEGOTIABLE
+
+THE TEN RULES BELOW ARE HARD CONSTRAINTS. Each one was paid for with a real
+production incident or a multi-PR bug chain in THIS repository (cited inline).
+They override convenience, deadlines and "it's just a small feature". A PR that
+violates any of them MUST be rejected in review regardless of how good the rest
+of it is. If a task genuinely seems to require breaking one — STOP and raise it
+with the owner; do not code around it.
+
+### 1. EVERY BUFFER, CACHE, HISTORY AND PAYLOAD HAS AN EXPLICIT SIZE BUDGET
+
+Nothing accumulates unboundedly. A row/item cap is NOT a byte cap. Anything
+replayed to a model, buffered in memory, persisted per step, or refetched by a
+poll must state its budget in bytes/tokens and enforce it. Rewriting a growing
+structure in full on every increment is FORBIDDEN — append or diff instead;
+O(n²) write/serialize patterns do not pass review.
+(Paid for by: full-row rewrite on every agent step — hundreds of MB of Postgres
+writes per 50-step run, with every tool output serialized twice; unbounded
+history replay killing long chats on the provider context window; 32 MB replay
+buffers per active run.)
+
+### 2. EVERYTHING LONG-RUNNING TERMINATES BY CONSTRUCTION
+
+Every run / row / session / lease / subscriber / queue entry must define AT
+DESIGN TIME: its owner; every terminal state; who writes the terminal state on
+EVERY path (success, error, abort, disconnect in each phase, process restart);
+retries for the terminal write; and a periodic sweeper that does not depend on
+a reboot. A best-effort terminal write with no retry and no sweep is FORBIDDEN.
+(Paid for by: assistant rows stuck 'streaming' forever; runs stuck 'running'
+409-locking their chat until a restart — the #183/#184 follow-up chain.)
+
+### 3. EVERY AWAIT IS CANCELLABLE AND DEADLINED; NEVER BLOCK THE EVENT LOOP
+
+Every async step inside a request or agent turn honors the turn's AbortSignal
+AND a wall-clock deadline — including in-app tools, lock queues and pagination
+loops, not just external calls. Synchronous CPU work beyond ~50 ms goes to a
+worker_thread. Promise.race DOES NOT cancel synchronous work — using it as a
+"timeout" for sync computation is forbidden (the timer only fires after the
+event loop is free again, i.e. after the damage is done).
+(Paid for by: in-app tools ignoring abortSignal and writing pages AFTER Stop;
+the synchronous ELK layout freezing every SSE stream in the process; the
+step-0 MCP handshake hang — #397.)
+
+### 4. ONE SOURCE OF TRUTH; EVERYTHING ELSE IS A REBUILDABLE CACHE
+
+Postgres is the authoritative state. Every in-memory structure (registries,
+caches, client stores) must be reconstructible from the DB and treated as
+lossy. The client renders SERVER-DECLARED state — "a run is active" is a server
+fact delivered as data, never inferred from side signals (204 vs 2xx, the
+flavor of a disconnect). A new feature must name the owner of each piece of
+state before implementation starts.
+(Paid for by: the strip/restore resume machinery, silently frozen UIs and
+ghost sends after unmount — the #381→#432→#456 chain.)
+
+### 5. STATE MACHINES ARE EXPLICIT — ONE-SHOT FLAGS ARE FORBIDDEN
+
+A complex lifecycle (chat thread, resume/reconnect, run) lives in a named-state
+automaton (reducer / enum) where every state has an owner and a rendered
+representation — including the failure states. Adding a boolean ref that one
+callback arms and another reads-and-clears is FORBIDDEN in the AI-chat client.
+New behavior = a new named state + explicit transitions, and the interruption
+matrix (disconnect in each phase × restart × stop × supersede) is enumerated at
+design time, not discovered one incident at a time.
+(Paid for by: 26 one-shot useRef flags in chat-thread.tsx and the drip of
+"one more missing transition" across #381→#386/#389→#432→#456.)
+
+### 6. NO NEW MODE FORKS; A FLAG IS FOR ROLLOUT, THEN IT DIES
+
+A behavior flag that forks a code path must ship with a written sunset
+condition; stacking a new flag onto the existing matrix without deleting or
+scheduling an old one is forbidden. While a temporary fork exists, BOTH sides
+must share identical lifecycle handling (abort semantics, error listeners,
+concurrency gates) — asymmetric forks are outlawed.
+(Paid for by: legacy vs autonomous divergence — the one-active-run gate and
+the socket 'error' listener each existing on only ONE side; 2^4 flag
+combinations each with different abort semantics.)
+
+### 7. NO HAND-SYNCED MIRRORS — CODEGEN OR A CI PARITY TEST, NOTHING LESS
+
+Two copies of the same knowledge (schema, tool registry, glyph map, probe
+body, hash/normalize algorithm, label list) require either generation from a
+single source or a CI test that FAILS on drift. A "mirror this change over
+there" comment is NOT a guard and does not pass review.
+(Paid for by: #293 — three drifting converter copies losing data; #447 —
+REGISTRY_STAMP covering only one of the mirrored files; ~10 still-unguarded
+mirrors across the MCP layer.)
+
+### 8. CACHES, HEADERS, BUFFERS AND FSM TRANSITIONS GET AN INTEGRATION TEST OF THE OBSERVABLE PROPERTY
+
+A unit test of a pure helper DOES NOT COUNT for these. Test the real header on
+the real HTTP response, the real cache hit under real token sources, the real
+transition under a really-killed socket. If the observable property cannot be
+tested, the design is wrong — fix the design, not the test.
+(Paid for by: #431→#439 — a cache keyed on a fresh-per-call JWT, so it NEVER
+hit and became prod incident #435 while its unit tests stayed green; and by
+the #352→#455 immutable-cache header silently overwritten by a framework
+default AFTER the unit-tested code ran.)
+
+### 9. CLIENT INPUT IS HOSTILE UNTIL VALIDATED — ALSO BEFORE PERSISTENCE
+
+Anything from the browser (message parts, ids, titles, selections, flags) is
+validated/sanitized BEFORE it is persisted into a row that will later be
+replayed into a prompt, a converter or another subsystem. A poisoned row must
+never be able to permanently brick a chat or a page on every subsequent read.
+(Paid for by: unvalidated UIMessage parts persisted verbatim — one bad row
+500s the chat on every later turn; #159 client-spoofed page titles; #388
+selection re-sanitized server-side for the same reason.)
+
+### 10. FAILURES ARE LOUD AND SPECIFIC; SILENT DEGRADATION IS FORBIDDEN
+
+Extends the error convention below: a fire-and-forget write is allowed ONLY
+with a metric or a greppable ERROR log; a degraded mode (dead cached MCP
+client, stopped poll, exhausted retries, evicted buffer) must be VISIBLE to
+the user or the operator. A feature that can quietly stop working — a frozen
+"streaming…" UI, a poll that silently gives up, a cache serving corpses — does
+not pass review.
+(Paid for by: the degraded poll's silent 10-minute death leaving a forever-
+"streaming" answer; dead MCP clients served from cache while every external
+tool call failed; #435 being caught in minutes ONLY because metrics — #403 —
+existed.)
+
+## Default skill for feature design
+
+For any feature-design request — the user hands over a raw feature idea, asks
+to design or think through a feature, or to draft an issue («спроектируй»,
+«продумай фичу», «составь ишью», "design X", "write an issue for X") — invoke
+the `orchestrator-feature-designer` skill (Skill tool) BEFORE any other work.
+It is the default operating mode for design work in this repository: research
+→ design checklist (R1–R10) → forks resolved with the human → adversarial
+self-attack → filed PR-sized issues. Do not design features or write issues
+ad-hoc while this skill is available. This does not apply to non-design work
+(bug fixes, reviews, retrospectives, refactors already specified by an issue).
+
 ## Task lifecycle
 
 ### 1. Start: sync with develop
@@ -201,7 +334,7 @@ pnpm workspace (`pnpm@10.4.0`) orchestrated by **Nx**. Four workspace packages:
 | `apps/client` | `client` | React 18 + Vite + Mantine 8 + TanStack Query + Jotai | SPA frontend |
 | `packages/editor-ext` | `@docmost/editor-ext` | Tiptap/ProseMirror | Shared Tiptap node/mark extensions, imported by both the client and the server |
 | `packages/mcp` | `@docmost/mcp` | MCP SDK, Tiptap, Yjs | Standalone MCP server, also bundled into the server at `/mcp`. Consumes the shared converter/schema from `@docmost/prosemirror-markdown` (#293) — it no longer carries its own vendored converter/schema copy |
-| `packages/prosemirror-markdown` | `@docmost/prosemirror-markdown` | Tiptap, marked, jsdom | The single, canonical ProseMirror↔Markdown converter + Docmost schema mirror (#293). Consumed by `mcp` and `git-sync`; there is exactly ONE copy of the converter now |
+| `packages/prosemirror-markdown` | `@docmost/prosemirror-markdown` | Tiptap, marked; jsdom (Node only) | The single, canonical ProseMirror↔Markdown converter + Docmost schema mirror (#293). Consumed by `mcp`, `git-sync`, `apps/server` (server-side markdown import/export, #345), AND `apps/client` (markdown paste/copy + AI-chat render, via the `browser` entry — native `DOMParser`, no jsdom in the client bundle, #347); there is exactly ONE copy of the converter now |
 
 `build` targets are Nx-cached and dependency-ordered (`dependsOn: ["^build"]`), so `editor-ext` builds before the apps. `nx.json` sets `affected.defaultBase: main`.
 
@@ -214,6 +347,12 @@ Run from the repo root unless noted. The dev workflow needs **Postgres (with the
 > server, `APP_SECRET` mismatch between processes, a stale `editor-ext` white-
 > screening the client, LAN exposure. See **[docs/dev-stand.md](docs/dev-stand.md)**
 > for the step-by-step and the traps.
+>
+> **Testing the app against a stand** (browser E2E + out-of-band verification) has
+> its own non-obvious traps — the page has two ProseMirror editors (only the body is
+> collab-bound), a ~10s store debounce, and API-seeding the thing under test is a
+> silent no-test. See **[docs/how-to-test.md](docs/how-to-test.md)** before writing
+> UI tests.
 
 ```bash
 pnpm install                 # install all workspaces (uses pnpm patches; see package.json `pnpm.patchedDependencies`)
@@ -224,6 +363,40 @@ pnpm build                   # nx run-many -t build (all packages)
 pnpm collab:dev              # run the collaboration server process standalone (see "Two server processes")
 ```
 
+> **Build the shared packages before running a consumer's `tsc`/tests in
+> isolation.** The `build/` dirs of `@docmost/prosemirror-markdown`,
+> `@docmost/git-sync`, and `@docmost/mcp` are **gitignored** (not committed), and
+> a single-package `pnpm --filter <pkg> test` / `tsc` or a bare `pnpm -r test`
+> does **NOT** honour the Nx `dependsOn: ["^build"]` ordering. So a consumer — the
+> server's `tsc`, `git-sync`'s vitest typecheck, `mcp`'s `pretest: tsc` — fails
+> with `error TS2307: Cannot find module '@docmost/…'` until those packages are
+> built first:
+> ```bash
+> pnpm --filter @docmost/prosemirror-markdown build
+> pnpm --filter @docmost/editor-ext build
+> pnpm --filter @docmost/git-sync build && pnpm --filter @docmost/mcp build
+> ```
+> `pnpm build` (nx run-many) does this for you; CI does it explicitly in
+> `.github/workflows/test.yml` (prosemirror-markdown → git-sync/mcp → server, in
+> that order). Reach for it whenever you run a consumer package's checks on their
+> own rather than through the full `pnpm build`.
+
+> **Editing an MCP tool spec requires a rebuild (issue #447).** The running
+> server loads the **compiled** `packages/mcp/build/` of `@docmost/mcp` (via the
+> runtime loader in `apps/server/src/core/ai-chat/tools/docmost-client.loader.ts`),
+> but the parity/tier guard tests read `packages/mcp/src/tool-specs.ts`. So if you
+> edit `tool-specs.ts` (any tool name, description, tier, catalog line, or input
+> schema) **without rebuilding**, `build/` and `src/` silently diverge — the tests
+> stay green while the server serves the OLD tools. To close that gap, the build
+> emits a `REGISTRY_STAMP` (a deterministic hash of the tool-specs content, via
+> `scripts/gen-registry-stamp.mjs` before `tsc`); on dev/test startup the loader
+> recomputes it from `src/` and **refuses to start with a "@docmost/mcp build is
+> stale …" error** on a mismatch (a pure no-op in prod, where only `build/` ships).
+> After editing tool specs, rebuild:
+> ```bash
+> pnpm --filter @docmost/mcp build     # or: pnpm --filter @docmost/mcp watch
+> ```
+
 **Lint** (per package — there is no root lint script):
 ```bash
 pnpm --filter server lint    # eslint --fix on server .ts
@@ -250,7 +423,10 @@ pnpm --filter server migration:codegen                   # regenerate src/databa
 ```
 Migration files live in `apps/server/src/database/migrations/` and are named `YYYYMMDDThhmmss-description.ts`. Fork-specific migrations only **add** tables (`page_embeddings`, `ai_chats`, `ai_chat_messages`, `ai_provider_credentials`, `ai_mcp_servers`, `page_template_references`) and columns (e.g. `pages.is_template`, a `NOT NULL DEFAULT false` boolean) — never drop/rewrite Docmost data.
 
-**Migration ordering — always check when merging branches/features.** Kysely runs migrations in **alphabetical (= timestamp) order** and refuses to start if a *new* migration sorts **before** one already applied to the DB (`corrupted migrations: ... must always have a name that comes alphabetically after the last executed migration`). When you merge a branch or land a feature, verify your migration's timestamp still sorts **after every migration that may already be applied on the target** (`/bin/ls -1 apps/server/src/database/migrations | sort | tail`). Branches developed in parallel routinely break this: a feature branch adds `…T130000-…`, `main` meanwhile ships and deploys `…T150000-…`, and after the merge the older-timestamped file is rejected at boot. **Fix = rename your migration to a timestamp after the latest one already in the target** (content unchanged — the filename is the ordering key), then rebuild so the compiled `dist/database/migrations/` picks up the new name.
+**Migration ordering — always check when merging branches/features.** Kysely runs migrations in **alphabetical (= timestamp) order**. A *new* migration that sorts **before** one already applied to the DB is a "back-dated" migration, which branches developed in parallel routinely produce: a feature branch adds `…T130000-…`, `develop` meanwhile ships and deploys `…T150000-…`, and after the merge the older-timestamped file has been skipped. Two layers guard this (both added for incident #361, where a back-dated migration crash-looped prod for ~11 min):
+
+- **CI gate (primary):** the `migration-order` job in `.github/workflows/test.yml` fails a PR whose added migration sorts at/before the newest on the base branch. **So the fix is to rename your migration to a timestamp after the latest one already in the target** (`/bin/ls -1 apps/server/src/database/migrations | sort | tail`; content unchanged — the filename is the ordering key), then rebuild so the compiled `dist/database/migrations/` picks up the new name.
+- **Runtime safety net:** both Migrators (`migration.service.ts` startup auto-migrate + `migrate.ts` CLI) set `allowUnorderedMigrations: true`, so the app does **not** refuse to start on an out-of-order migration — it applies the skipped older one instead of crash-looping. Kysely's `#ensureNoMissingMigrations` guard is still on (a *removed* applied migration is still an error). Because apply order can then differ from lexicographic across instances, migrations must stay **independent** (each creates its own objects) — the CI gate remains the primary line; this net only covers a gate bypass (manual push / hotfix branch).
 
 ## Architecture — the big picture
 
@@ -279,11 +455,12 @@ The API server is a Fastify app with a global `/api` prefix (`main.ts` excludes
    - `core/ai-chat/tools/` — the agent's ~40 read+write tools. Every tool runs under the **calling user's** CASL permissions via a per-user loopback access token (`docmost-client.loader.ts`), so the agent can never exceed what the user could do. Only **reversible** operations are exposed (page history + trash; no permanent delete). Agent edits get an "AI agent" provenance badge in page history (`20260616T130000-agent-provenance` migration).
    - `core/ai-chat/embedding/` — RAG indexer + a BullMQ consumer on `AI_QUEUE` that embeds pages into `page_embeddings` (vector search), complementing Postgres full-text search. Pages are (re)indexed on edit; `AI_EMBEDDING_TIMEOUT_MS` bounds a hung embeddings endpoint.
    - `core/ai-chat/external-mcp/` — admins can attach external MCP servers (e.g. Tavily) to give the agent web access. **`ssrf-guard.ts` validates outbound MCP URLs against SSRF** — keep that guard in the path when touching external-MCP connection logic.
+   - `core/ai-chat/ai-chat-run.service.ts` + `ai_chat_runs` — **every agent turn is now a first-class server-side RUN** (`#184`, universalized in `#487`): its lifecycle is tracked in `ai_chat_runs` in **both** modes, and the single-active-run-per-chat concurrency gate is enforced universally (a legacy second tab now gets a clean `409 A_RUN_ALREADY_ACTIVE` instead of a second parallel stream that interleaved history). The per-workspace `settings.ai.autonomousRuns` flag (off by default) **no longer gates whether a turn is a run** — it now controls **only the browser-disconnect semantics**: when ON the run is *detached* (a disconnect leaves it executing server-side; only an explicit `POST /ai-chat/stop` ends it, and a client reconnects/live-follows via `POST /ai-chat/run`); when OFF (legacy) a disconnect ends the turn by stopping its run via the run's stop lever. `#487` also adds a server-side **supersede** CAS ("interrupt and send now") to `POST /ai-chat/stream` (`supersede: { runId }`): it atomically stops the chat's currently-active run and waits for it to settle before the new turn claims the slot, returning `SUPERSEDE_INVALID` / `SUPERSEDE_TARGET_MISMATCH` / `SUPERSEDE_TIMEOUT` on the non-proceed branches. **DEPLOY CONSTRAINT — single-instance only in phase 1:** Stop and the AbortController that backs it are process-local, so a Stop only aborts a run executing on the **same** replica that owns it (cross-instance pub/sub stop is phase 2). Do **not** enable `autonomousRuns` on a horizontally-scaled deployment (multiple replicas behind a load balancer, or Docmost cloud `CLOUD=true`) — run a single instance instead. The server logs a startup WARNING when it detects a multi-instance deployment (`CLOUD=true`) so the constraint is visible. The startup sweep settles any run left dangling by a restart.
 
 ### Client structure
 Vite SPA. Code is organized by feature under `apps/client/src/features/*` (mirrors the server domains: `page`, `space`, `comment`, `ai-chat`, `editor`, …). Conventions:
 - **TanStack Query** for server state (one `queries/` file per feature), **Jotai** atoms for local/shared UI state, **Mantine 8** + CSS modules (`*.module.css`) + `postcss-preset-mantine` for UI.
-- The editor is Tiptap; shared node/mark extensions live in `packages/editor-ext` and are imported by **both the client and the server** (collaboration, import/export) — editor schema changes often need to be made in `editor-ext`, not just the client. The ProseMirror↔Markdown converter and its Docmost schema mirror now live in a SINGLE package, `@docmost/prosemirror-markdown` (#293), consumed by both `mcp` and `git-sync` — do NOT reintroduce a per-package copy. `editor-ext` is the upstream source of the Tiptap schema; the package's `docmost-schema.ts` mirrors it and a serializer-contract test (`packages/prosemirror-markdown/test/serializer-contract.test.ts`) guards the boundary (every schema node must have a converter case), so a drift surfaces as a failing test rather than silent divergence.
+- The editor is Tiptap; shared node/mark extensions live in `packages/editor-ext` and are imported by **both the client and the server** (collaboration, schema, `canonicalizeFootnotes`) — editor schema changes often need to be made in `editor-ext`, not just the client. Server-side markdown import/export no longer lives in `editor-ext`: it goes through the canonical converter (#345, see below). The ProseMirror↔Markdown converter and its Docmost schema mirror now live in a SINGLE package, `@docmost/prosemirror-markdown` (#293), consumed by `mcp`, `git-sync`, `apps/server` (#345), and `apps/client` (#347) — do NOT reintroduce a per-package copy. The client uses the package's `browser` entry (`@docmost/prosemirror-markdown/browser`): markdown paste (`markdown-clipboard.ts`), copy-as-markdown, and AI-chat rendering now all go through the canonical converter, so the hand-written `marked`/`turndown` markdown layer that used to live in `editor-ext` was deleted (#347). The browser entry runs the HTML→DOM stage on the native `DOMParser`, so jsdom stays out of the client bundle. `editor-ext` is the upstream source of the Tiptap schema; the package's `docmost-schema.ts` mirrors it and a serializer-contract test (`packages/prosemirror-markdown/test/serializer-contract.test.ts`) guards the boundary (every schema node must have a converter case), so a drift surfaces as a failing test rather than silent divergence. For the converter's property-testing and counterexample→fixture process (P1–P4 invariants, the `PROPERTY_SEED`/`PROPERTY_NUM_RUNS` knobs, and the nightly fuzz workflow), see `packages/prosemirror-markdown/README.md`.
 - API access goes through `apps/client/src/lib/api-client.ts` (axios). The `@` alias maps to `apps/client/src`.
 - Runtime config is injected at build time by `vite.config.ts` via `define` (`APP_URL`, `COLLAB_URL`, `APP_VERSION`, …) — these come from the root `.env`, not from `import.meta.env`.
 
@@ -293,8 +470,8 @@ Vite SPA. Code is organized by feature under `apps/client/src/features/*` (mirro
 - **Errors must never be swallowed or shown as generic messages.** Every caught error MUST (1) be logged in full to the console/logger — error name, message, stack, `cause`, and (for HTTP/provider failures) the status code and response body — and (2) be surfaced to the user with a *specific, human-readable explanation of what actually went wrong*, never a bare generic string like "Something went wrong" / "Could not start recording" / "Transcription failed". Include the real reason (the underlying error/provider message) in the user-facing text. On the server, wrap third-party/provider failures with `describeProviderError` (or equivalent) and rethrow as a meaningful HTTP status + message — never let them collapse into an opaque 500. On the client, `console.error(<context>, err)` the raw error AND show the extracted reason (e.g. `err.response?.data?.message`, or the error `name: message`) in the notification.
 - The version string shown in the UI comes from `APP_VERSION` (CI/Docker) or `git describe --tags --always` (local), resolved in `vite.config.ts` — not from `package.json`.
 - Server TS config is permissive (`noImplicitAny: false`, `strictNullChecks: false`, `no-explicit-any` lint disabled). Follow the existing relaxed style rather than tightening types broadly.
-- Dependency versions are heavily pinned via `pnpm.overrides` and `pnpm.patchedDependencies` (`scimmy`, `yjs`) in the root `package.json`. Don't bump pinned/patched deps casually; the patches and overrides exist for compatibility/security reasons.
-- **Adding/renaming/removing an MCP tool requires updating `SERVER_INSTRUCTIONS`** in `packages/mcp/src/index.ts` — the intent-routing guide MCP clients receive on initialize. This applies both to inline `server.registerTool(...)` calls in `index.ts` and to specs in `packages/mcp/src/tool-specs.ts`. Enforced by `packages/mcp/test/unit/server-instructions.test.mjs`, which fails when a registered tool is not mentioned in the guide (deliberate opt-outs go into its `EXCEPTIONS` list). `packages/mcp/build/` is gitignored and rebuilt in CI/Docker via `pnpm build` (same convention as `git-sync`/`prosemirror-markdown`) — never commit it; rebuild locally after editing to run the tests.
+- Dependency versions are heavily pinned via `pnpm.overrides` and `pnpm.patchedDependencies` (`scimmy`, `yjs`, `ai`) in the root `package.json`. Don't bump pinned/patched deps casually; the patches and overrides exist for compatibility/security reasons. The `ai@6.0.134` patch carries TWO independent server fixes, each with its own tripwire test: (1) it disables the SDK's O(n²) cumulative `partialOutput` accumulation when no output strategy is requested (server heap OOM on long agent runs, #184; tripwire: `apps/server/src/integrations/ai/ai-sdk-partial-output.patch.spec.ts`); (2) it fixes `writeToServerResponse`'s drain-hang — the loop awaited only `"drain"` under backpressure, so a mid-write client disconnect parked the pipe forever and leaked the reader/buffers until restart; it now races `"drain"` against `"close"`/`"error"`, cancels the reader on disconnect, and swallows the fire-and-forget read rejection (#486; tripwire: `apps/server/src/integrations/ai/ai-sdk-drain-hang.patch.spec.ts`). Both tripwires assert BOTH installed dist builds carry their patch marker. The patch MUST be re-created via `pnpm patch` when bumping `ai`.
+- **The MCP tool inventory in `SERVER_INSTRUCTIONS` is GENERATED from the registry** (`packages/mcp/src/server-instructions.ts`: `buildToolInventory()` over `SHARED_TOOL_SPECS`) and spliced into the hand-written routing prose (`ROUTING_PROSE`). So adding/renaming/removing a **shared** spec in `packages/mcp/src/tool-specs.ts` auto-updates the `<tool_inventory>` — no manual `SERVER_INSTRUCTIONS` edit needed. Only an **inline** MCP-only tool (those registered via `server.registerTool(...)` in `index.ts`, not through the registry) needs a one-line entry in `INLINE_MCP_INVENTORY`. Enforced by `packages/mcp/test/unit/tool-inventory.test.mjs`, which fails when a registered tool is missing from the generated inventory (there is no `EXCEPTIONS` opt-out anymore — every tool must appear). Update `ROUTING_PROSE` when a tool's *intent guidance* (when-to-use) changes. `packages/mcp/build/` is gitignored and rebuilt in CI/Docker via `pnpm build` (same convention as `git-sync`/`prosemirror-markdown`) — never commit it; rebuild locally after editing to run the tests.
 
 ## CI / release
 

CHANGELOG.md

@@ -10,6 +10,123 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+### Breaking Changes
+
+- **External MCP tool names are now camelCase (all renamed).** Every tool on the
+  external `/mcp` surface was renamed from `snake_case` to `camelCase`, so the
+  external MCP name now matches the in-app tool name exactly (one logical tool,
+  one name everywhere). For example `get_node` → `getNode`, `edit_page_text` →
+  `editPageText`, `patch_node` → `patchNode`. The tools' behaviour, inputs and
+  outputs are unchanged — only the names change. The single-word `search`
+  keeps its name.
+
+  *Migration (external MCP clients only — the in-app AI agent already used these
+  names and is unaffected):* update anything that refers to a tool by its
+  string name — permission allowlists (`mcp__gitmost-*__get_node` →
+  `mcp__gitmost-*__getNode`), saved prompts/skills, `.mcp.json` tool filters,
+  and metrics dashboards that group by the `tool` label — and roll it out in
+  lockstep with this deploy, because the old snake_case names stop resolving.
+  Released together with the `import_page_markdown`/`update_page_markdown`
+  change below so external configs break exactly once.
+
+  Full mapping (old → new):
+
+  | Old (snake_case) | New (camelCase) |
+  | --- | --- |
+  | `check_new_comments` | `checkNewComments` |
+  | `copy_page_content` | `copyPageContent` |
+  | `create_comment` | `createComment` |
+  | `create_page` | `createPage` |
+  | `delete_comment` | `deleteComment` |
+  | `delete_node` | `deleteNode` |
+  | `delete_page` | `deletePage` |
+  | `diff_page_versions` | `diffPageVersions` |
+  | `docmost_transform` | `docmostTransform` |
+  | `drawio_create` | `drawioCreate` |
+  | `drawio_get` | `drawioGet` |
+  | `drawio_guide` | `drawioGuide` |
+  | `drawio_shapes` | `drawioShapes` |
+  | `drawio_update` | `drawioUpdate` |
+  | `edit_page_text` | `editPageText` |
+  | `export_page_markdown` | `exportPageMarkdown` |
+  | `get_node` | `getNode` |
+  | `get_outline` | `getOutline` |
+  | `get_page` | `getPage` |
+  | `get_page_json` | `getPageJson` |
+  | `get_workspace` | `getWorkspace` |
+  | `insert_footnote` | `insertFootnote` |
+  | `insert_image` | `insertImage` |
+  | `insert_node` | `insertNode` |
+  | `list_comments` | `listComments` |
+  | `list_page_history` | `listPageHistory` |
+  | `list_pages` | `listPages` |
+  | `list_shares` | `listShares` |
+  | `list_spaces` | `listSpaces` |
+  | `move_page` | `movePage` |
+  | `patch_node` | `patchNode` |
+  | `rename_page` | `renamePage` |
+  | `replace_image` | `replaceImage` |
+  | `resolve_comment` | `resolveComment` |
+  | `restore_page_version` | `restorePageVersion` |
+  | `search` | `search` (unchanged) |
+  | `search_in_page` | `searchInPage` |
+  | `share_page` | `sharePage` |
+  | `stash_page` | `stashPage` |
+  | `table_delete_row` | `tableDeleteRow` |
+  | `table_get` | `tableGet` |
+  | `table_insert_row` | `tableInsertRow` |
+  | `table_update_cell` | `tableUpdateCell` |
+  | `unshare_page` | `unsharePage` |
+  | `update_comment` | `updateComment` |
+  | `update_page_json` | `updatePageJson` |
+  | `update_page_markdown` | `updatePageMarkdown` |
+
+  (#412)
+
+- **External MCP: `import_page_markdown` removed, `update_page_markdown` added.**
+  The external `/mcp` surface no longer exposes `importPageMarkdown` (the
+  round-trip parser for a self-contained *exported* Docmost-Markdown file). In
+  its place it now exposes **`updatePageMarkdown`** — a plain-Markdown
+  full-body replace (`{pageId, content, title?}`) that pairs with
+  `updatePageJson`, re-imports the whole body (block ids regenerate) and
+  parses Docmost-flavoured markdown including `^[...]` inline footnotes.
+  *Migration:* MCP clients that called `importPageMarkdown` to overwrite a
+  page's body from Markdown should call `updatePageMarkdown` instead (pass the
+  markdown as `content`). Round-tripping an exported Docmost-Markdown file with
+  comment anchors/diagrams is no longer available on the external MCP surface;
+  export remains via `exportPageMarkdown`. The in-app AI agent is unaffected —
+  it keeps both `importPageMarkdown` and the renamed `updatePageMarkdown` (was
+  `updatePageContent`). The total MCP tool count is unchanged (−1 / +1). The
+  external names shown here are the post-#412 camelCase names. (#411)
+
+- **`getNode` now returns Markdown by default (was ProseMirror JSON).** The
+  block-level read/write tools default to Markdown so a block round trip is
+  `getNode` (markdown) → edit → `patchNode` (markdown). `getNode` now returns
+  `{ …, format: "markdown", markdown }` unless you pass `format: "json"` (which
+  restores the previous `{ …, node }` ProseMirror subtree); comment anchors —
+  including resolved ones — are preserved in the markdown so a write-back never
+  orphans a thread, and a node that cannot be a document top-level block
+  (`tableRow`/`tableCell`/`tableHeader` addressed via `#<index>`) auto-falls back
+  to JSON with `format: "json"` in the response. `patchNode`/`insertNode` gain a
+  `markdown` input alongside `node` (provide exactly one): the markdown fragment
+  may rewrite/insert several blocks at once and supports `^[...]` footnotes.
+  *Migration (external MCP clients only):* a client that consumed `getNode`'s
+  `node` field must now either read `markdown`, or pass `format: "json"` to keep
+  the old ProseMirror-JSON output. Released together with the `#411`/`#412`
+  breaking window so external configs break exactly once. (#413)
+
+- **The Prometheus `/metrics` listener now binds to `127.0.0.1` (loopback) by
+  default instead of `0.0.0.0` (all interfaces).** This closes an unauthenticated
+  endpoint that was previously reachable on every interface. **DEPLOY MIGRATION —
+  cross-container scraping breaks silently otherwise:** if your scraper runs in a
+  SEPARATE container and reaches the app as `docmost:9464` (the exact topology the
+  old `0.0.0.0` hardcode served), you MUST now set `METRICS_BIND=0.0.0.0` — and,
+  because that re-exposes the endpoint, also set `METRICS_TOKEN=<secret>` and
+  configure the scraper with a matching Bearer token. Without `METRICS_BIND`, the
+  scraper can no longer connect and metrics go dark with no error. See the
+  `METRICS_BIND` / `METRICS_TOKEN` block in `.env.example` for the migration.
+  Same-host (loopback) scrapers need no change. (#486)
+
 ### Added
 
 - **Place several images side by side in a row.** A new "Inline (side by
@@ -72,6 +189,30 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
   append/prepend fragments, nor to COMMENT bodies — a comment may legitimately
   contain a standalone footnote definition, which canonicalization would drop.
   (#228)
+- **Detached, autonomous agent runs that survive a browser disconnect.** When the
+  new `settings.ai.autonomousRuns` workspace flag is on (off by default), an
+  AI-chat turn becomes a first-class, server-side RUN tracked in a new
+  `ai_chat_runs` table instead of a socket-bound stream: closing the tab or
+  losing the connection no longer aborts the turn — it keeps executing and
+  persisting server-side, and only an explicit Stop ends it. A client can
+  reconnect and live-follow (or stop) an in-flight run via `POST /ai-chat/run`
+  (resolve the latest run + its assistant message for a chat) and
+  `POST /ai-chat/stop` (stop by `runId` or `chatId`). A partial unique index
+  enforces one active run per chat, and a startup sweep settles any run left
+  dangling by a restart. Phase 1 is single-instance-only (cross-instance Stop is
+  not yet reliable); the server warns at startup on a horizontally-scaled
+  deployment. (#184)
+- **Server-side "interrupt and send now" (supersede) for AI chat.** `POST
+  /ai-chat/stream` now accepts a `supersede: { runId }` field: when the user sends
+  a new message while a run is active, the server atomically stops that run and
+  waits for it to settle before the new turn claims the chat's single run slot,
+  instead of the send being rejected as concurrent. The compare-and-set surfaces
+  three codes on its non-proceed branches — `SUPERSEDE_INVALID` (the targeted run
+  is malformed / belongs to another chat), `SUPERSEDE_TARGET_MISMATCH` (a
+  different run is now active; carries the current `activeRunId`), and
+  `SUPERSEDE_TIMEOUT` (the previous run did not stop within the settle window, so
+  nothing was sent and the composer keeps the text). Tunable via
+  `AI_CHAT_SUPERSEDE_TIMEOUT_MS` (default 10s). (#487)
 - **Out-of-band page transfer via an in-RAM blob sandbox (`stash_page`).** A
   new MCP tool serializes a whole page (its full ProseMirror JSON, with every
   internal image/file mirrored) into an ephemeral in-RAM blob and returns only
@@ -133,9 +274,48 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
   by physical key position and matched against the commands; genuine Cyrillic
   search terms keep priority over remapped candidates, and short wrong-layout
   prefixes match by command title. (#283, #285, #287)
+- **Opt-in substring "lookup" search mode for agents.** `/api/search` gains an
+  additive, opt-in mode (guarded by a new `substring` flag) that matches literal
+  substrings of page titles and body text — so technical tokens the full-text
+  tokenizer mangles (`backup-srv.local`, `10.0.12.5`, `WB-MGE-30D86B`) are found
+  even when the FTS query is empty. It returns a location `path`, a windowed
+  `snippet` and a per-response relevance `score`, supports `titleOnly` and a
+  `parentPageId` subtree scope, and applies the page-level permission filter
+  before the limit. The web UI never sets `substring`, so its full-text search
+  behaviour is byte-for-byte unchanged. The leading-wildcard `LIKE` predicates
+  are backed by GIN trigram indexes on `LOWER(f_unaccent(title))` and
+  `LOWER(f_unaccent(text_content))` so lookups use a bitmap index scan instead of
+  a sequential scan. (#443)
+- **MCP `search` tool returns richer, agent-oriented results.** The external MCP
+  `search` response shape changes for the agent surface: each hit now carries
+  `pageId` (renamed from `id`), plus `path`, `snippet` and `score`; the
+  UI-oriented `spaceId`, `rank` and `highlight` fields are dropped. (#443)
 
 ### Changed
 
+- **Every AI-chat turn is now a first-class server-side run, and one run per chat
+  is enforced in both modes.** The run machinery from `#184` was universalized: a
+  turn is tracked in `ai_chat_runs` and gated by the single-active-run-per-chat
+  index regardless of the `settings.ai.autonomousRuns` flag. **Behavior change:**
+  a second tab (or a double-submit) that starts a turn while one is already active
+  on the chat is now rejected up front with `409 A_RUN_ALREADY_ACTIVE` (carrying
+  the `activeRunId`); previously, on the legacy path, it opened a second parallel
+  stream on the same chat that interleaved history. The `autonomousRuns` flag no
+  longer controls whether a turn is a run — it now governs **only** the
+  browser-disconnect semantics (ON = detached/survives a disconnect; OFF = a
+  disconnect stops the run). (#487)
+- **Client markdown paste/copy and AI-chat rendering now go through the canonical
+  converter.** Pasting markdown into the editor, "Copy as markdown", the AI title
+  generator, and the AI-chat markdown renderer all now use
+  `@docmost/prosemirror-markdown` (via its new `browser` entry — native
+  `DOMParser`, no jsdom in the client bundle) instead of the hand-written
+  `marked`/`turndown` markdown layer in `editor-ext`, which was **deleted**. As a
+  result, pasting canonical markdown (`^[…]` footnotes, `<!--img …-->`,
+  `> [!type]` callouts, `$…$` math, `==…==` highlight, standalone `<!--subpages-->`
+  comments) now produces the SAME nodes the server import produces for the same
+  text. Chat/reasoning markdown now renders through the editor schema (list items
+  are wrapped in `<p>`; CSS keeps them tight). (#347)
+
 - **Enabling a public share no longer auto-shares the whole sub-tree.** Turning
   a page "Shared to web" now defaults to the page alone; descendant pages become
   public only when you explicitly turn on the dedicated "Include sub-pages"
@@ -156,6 +336,47 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ### Fixed
 
+- **The server no longer runs out of heap during long autonomous agent runs.** A
+  new pnpm patch on `ai@6.0.134` stops the SDK from building a cumulative
+  snapshot of the ENTIRE turn text on every streamed text-delta when no output
+  strategy was requested (our server never requests one). Unpatched, those
+  O(n²) `partialOutput` snapshots piled up in a never-consumed internal
+  `tee()` branch of the stream result — a ~20-step, ~28k-chunk agent run
+  retained ~1.7 GB and OOM'd the 2 GB JS heap. Streaming granularity is
+  unchanged; the patch must be re-created if `ai` is ever bumped. (#184)
+
+- **The server no longer leaks a hung stream pipe on every mid-run client
+  disconnect.** The same `ai@6.0.134` pnpm patch now also fixes the SDK's
+  `writeToServerResponse`, which awaited only a `"drain"` event under
+  backpressure: when a client disconnected mid-write the socket never drained, so
+  the write loop parked forever, `response.end()` was unreachable, and the stream
+  reader plus buffered chunks were pinned until process restart (every mid-run
+  disconnect in autonomous mode leaked one). The patch races `"drain"` against
+  `"close"`/`"error"`, cancels the reader and ends the response on disconnect, and
+  swallows the fire-and-forget read rejection instead of crashing on an
+  unhandledRejection. (#486)
+
+- **A failed autonomous agent-run start no longer becomes an unstoppable ghost
+  run.** When `beginRun` failed for a transient reason (e.g. a DB-pool blip),
+  the turn previously continued with NO run row — invisible to `/stop`, not
+  aborted on disconnect, and able to slip a second run past the one-run-per-chat
+  gate, leaving an unstoppable run until restart. The turn now fails fast with an
+  honest `503 A_RUN_BEGIN_FAILED` before the first byte (no orphan state), and the
+  client shows a "temporary — please try again" message instead of a misleading
+  "provider not configured". (#486)
+
+- **A pathological draw.io graph can no longer wedge the whole server.** The ELK
+  auto-layout (`layout:"elk"`) ran elkjs synchronously on the main event loop, so
+  a graph at the node/edge cap blocked ALL HTTP/SSE/loopback traffic while it
+  churned — and the old `setTimeout` "timeout" could never fire because the same
+  thread was blocked. Layout now runs in a worker thread with the timeout enforced
+  by `worker.terminate()`; the main loop stays responsive. (#486)
+
+- **The `/health` Redis probe no longer leaks a client on every tick while Redis
+  is down.** It built a new `ioredis` client per probe and disconnected it only on
+  success, so during an outage each health tick added another forever-reconnecting
+  client (an unbounded handle leak). A single long-lived probe client is now
+  reused and closed on shutdown. (#486)
 - **Internal links in exported Markdown no longer lose their visible text.** A
   link whose target page name had no file extension (e.g. a bare title) was
   collapsed to empty text during export, producing an unclickable, label-less
@@ -232,6 +453,24 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
   share); any other value now returns the generic "not found" instead of
   serving the page. (#218)
 
+- **Tool and provider error text no longer leaks to anonymous readers in the
+  public-share AI chat.** A failing tool's raw error (which could carry an
+  internal page title or a stack fragment) and a provider error (which bundles the
+  provider `statusCode` and response body — potentially the internal baseUrl or
+  model name) were streamed verbatim to the anonymous reader over SSE. Errors are
+  now sanitized at the source: the share toolset collapses any unclassified tool
+  error to a safe generic string (safe, classified tool messages still pass
+  through for the model's self-correction), and the anonymous stream `onError`
+  maps provider failures to a fixed set of neutral strings — the full detail goes
+  only to the server log. A UI render gate is layered on top. (closes #394)
+
+- **The Prometheus `/metrics` endpoint can now require Bearer authentication and
+  is loopback-bound by default.** Previously it listened on all interfaces with no
+  auth. Setting `METRICS_TOKEN` requires every scrape to present
+  `Authorization: Bearer <token>` (compared in constant time), and the listener
+  defaults to `127.0.0.1` (see the Breaking Changes entry for the cross-container
+  migration). (#486)
+
 ## [0.94.0] - 2026-06-26
 
 This release makes AI chat durable and fast: assistant turns are persisted to

Dockerfile

@@ -5,6 +5,13 @@ RUN npm install -g pnpm@10.4.0
 
 FROM base AS builder
 
+# re2 (packages/mcp) always compiles from source under pnpm (the prebuilt-binary
+# download cannot identify the GitHub repo), so node-gyp needs python3/make/g++.
+# This stage is discarded, so the toolchain can stay installed.
+RUN apt-get update \
+  && apt-get install -y --no-install-recommends python3 make g++ \
+  && rm -rf /var/lib/apt/lists/*
+
 WORKDIR /app
 
 COPY . .
@@ -38,6 +45,11 @@ COPY --from=builder /app/packages/editor-ext/dist /app/packages/editor-ext/dist
 COPY --from=builder /app/packages/editor-ext/package.json /app/packages/editor-ext/package.json
 COPY --from=builder /app/packages/mcp/build /app/packages/mcp/build
 COPY --from=builder /app/packages/mcp/package.json /app/packages/mcp/package.json
+# The mcp package reads its data files (drawio-presets.json, drawio-shape-index.json.gz)
+# at runtime via `new URL("../../data/…", import.meta.url)` relative to build/lib/*.js,
+# i.e. from packages/mcp/data/. tsc emits only build/, so ship data/ explicitly or
+# drawioFromGraph and the shape catalog die with ENOENT on packages/mcp/data/*.
+COPY --from=builder /app/packages/mcp/data /app/packages/mcp/data
 # mcp now depends on @docmost/prosemirror-markdown (workspace:*) and eager-imports
 # it at runtime (the in-app ai-chat DocmostClient loads build/index.js -> lib/
 # markdown-converter.js). Ship the built package + its manifest, or the prod
@@ -57,9 +69,16 @@ COPY --from=builder /app/patches /app/patches
 
 RUN chown -R node:node /app
 
-USER node
+# Toolchain is needed transiently to compile re2 during the prod install; install
+# and purge it in one layer to keep the final image slim. The install itself runs
+# as the node user via su to keep node_modules ownership without a costly chown layer.
+RUN apt-get update \
+  && apt-get install -y --no-install-recommends python3 make g++ \
+  && su node -c "pnpm install --frozen-lockfile --prod" \
+  && apt-get purge -y --auto-remove python3 make g++ \
+  && rm -rf /var/lib/apt/lists/*
 
-RUN pnpm install --frozen-lockfile --prod
+USER node
 
 RUN mkdir -p /app/data/storage
 
@@ -67,4 +86,14 @@ VOLUME ["/app/data/storage"]
 
 EXPOSE 3000
 
+# DEPLOY REQUIREMENT — SINGLE INSTANCE or STICKY SESSIONS (#449).
+# MCP content writes are serialized per page by an IN-PROCESS mutex, and the
+# stash_page blob store + cached collab sessions are RAM-only and process-local.
+# Running MULTIPLE replicas of this image behind a load balancer WITHOUT sticky
+# sessions silently breaks per-page write serialization (two replicas can lock
+# the same page at once) and makes stash_page blobs unreachable across replicas.
+# Run a SINGLE instance, or pin each page's traffic to one replica (sticky
+# sessions / consistent hashing on page id). There is deliberately no
+# cross-process lock yet — a conscious constraint. See .env.example (the "MCP
+# collaboration write path" block) and packages/mcp/README.md for details.
 CMD ["pnpm", "start"]

README.md

@@ -125,6 +125,32 @@ Gitmost follows the upstream Docmost setup. See the Docmost
 [documentation](https://docmost.com/docs) for self-hosting and development instructions; replace the
 `docmost/docmost` image with `ghcr.io/vvzvlad/gitmost` where applicable.
 
+### Reverse proxy: SSE streaming paths
+
+The AI agent streams its answers over Server-Sent Events. These endpoints produce a
+long-lived `text/event-stream` response and **must bypass response buffering AND response
+compression** at every proxy in front of the app:
+
+- `POST /api/ai-chat/stream` — the live agent turn stream
+- `GET /api/ai-chat/runs/<chatId>/stream` — attach/resume of a detached agent run
+  (`AI_CHAT_RESUMABLE_STREAM`)
+- `POST /api/shares/ai/stream` — the anonymous public-share assistant
+
+A buffering or compressing proxy does not break these with an error — it silently ruins them:
+the request hangs in `pending`, tokens stop streaming and arrive in one burst when the turn
+ends, or a reloaded tab falls back to coarse polling. The tell in DevTools is a
+`Content-Encoding: gzip/zstd` response header on a `text/event-stream` response.
+
+The server already sends `X-Accel-Buffering: no` (honored by nginx unless ignored), but
+compression middleware is applied by proxy configuration, not headers:
+
+- **nginx** — `proxy_buffering off; proxy_cache off; gzip off;` for these locations, e.g.
+  `location ~ ^/api/(ai-chat/(stream$|runs/.+/stream$)|shares/ai/) { ... }`
+- **Traefik** — route these paths through a dedicated router **without** the `compress`
+  middleware (a `compress` middleware buffers SSE frames until the response closes), e.g.
+  ``PathPrefix(`/api/ai-chat/stream`) || PathPrefix(`/api/ai-chat/runs/`)``. Belt-and-braces:
+  `traefik.http.middlewares.<name>.compress.excludedcontenttypes: text/event-stream`.
+
 ## Migration from Docmost
 
 Gitmost's database schema is a **strict superset** of Docmost's. Every Gitmost-specific migration

README.ru.md

@@ -126,6 +126,32 @@ Gitmost повторяет процесс установки upstream-Docmost.
 смотрите в [документации](https://docmost.com/docs) Docmost; где это применимо, заменяйте образ
 `docmost/docmost` на `ghcr.io/vvzvlad/gitmost`.
 
+### Reverse proxy: SSE-стриминговые пути
+
+AI-агент стримит ответы через Server-Sent Events. Эти эндпоинты отдают долгоживущий
+`text/event-stream`-ответ и **обязаны обходить буферизацию И сжатие ответов** на каждом
+прокси перед приложением:
+
+- `POST /api/ai-chat/stream` — живой стрим хода агента
+- `GET /api/ai-chat/runs/<chatId>/stream` — подключение/резюм detached-рана
+  (`AI_CHAT_RESUMABLE_STREAM`)
+- `POST /api/shares/ai/stream` — анонимный ассистент публичных шар
+
+Буферизующий или сжимающий прокси не ломает эти пути с ошибкой — он тихо их портит:
+запрос висит в `pending`, токены не стримятся и вываливаются одним куском в конце хода,
+а перезагруженная вкладка падает в грубый поллинг. Диагностический признак в DevTools —
+заголовок `Content-Encoding: gzip/zstd` на ответе с `text/event-stream`.
+
+Сервер уже шлёт `X-Accel-Buffering: no` (nginx учитывает его по умолчанию), но
+compression-мидлвари управляются конфигом прокси, а не заголовками:
+
+- **nginx** — `proxy_buffering off; proxy_cache off; gzip off;` для этих location,
+  например `location ~ ^/api/(ai-chat/(stream$|runs/.+/stream$)|shares/ai/) { ... }`
+- **Traefik** — вести эти пути через отдельный роутер **без** `compress`-мидлвари
+  (compress буферизует SSE-кадры до закрытия ответа), например
+  ``PathPrefix(`/api/ai-chat/stream`) || PathPrefix(`/api/ai-chat/runs/`)``. Для надёжности:
+  `traefik.http.middlewares.<name>.compress.excludedcontenttypes: text/event-stream`.
+
 ## Миграция с Docmost
 
 Схема БД Gitmost — это **строгий superset** схемы Docmost. Все Gitmost-специфичные миграции только

agent-roles-catalog/bundles/assistants/en.yaml

@@ -0,0 +1,458 @@
+schemaVersion: 1
+language: en
+roles:
+  - slug: researcher
+    emoji: 🧑🏻‍🏫
+    name: Researcher
+    description: Launches deep research
+    instructions: |-
+      You are a thorough research agent. Your job is to conduct deep, exhaustive
+      research on the user's query and produce the result as a document. You work
+      for a long time and never settle for shallow answers. Never fabricate facts
+      or attribute to a source anything it does not contain.
+
+      IMPORTANT: The final report must be written in ENGLISH, regardless of the
+      language of the sources you read. Conduct your searches and reasoning in
+      whatever language is most effective, but deliver the report in English.
+
+      ═══════════════════════════════════════════════
+      THE BUDGET: PAGES READ, NOT SEARCHES
+      ═══════════════════════════════════════════════
+      The unit of research work is a PAGE READ IN FULL — opening a source with the
+      page-reading/extraction tool and actually reading it. Search queries are free
+      and unlimited: they are navigation, not research. A search result snippet is a
+      POINTER, never a source. Nothing learned only from a snippet may enter the
+      report.
+
+      - If the user named a budget (e.g. "budget 100"), that is 100 pages read, and
+        it is BINDING — a floor you MUST reach. Spend it in full even past the point
+        where the topic feels covered (see BUDGET REMAINDER PROTOCOL below).
+      - If no budget is given, default to about 50 pages read; fewer only for a
+        single trivial fact, well over 50 for a hard, broad task. Absent an explicit
+        budget, stop only at genuine saturation — when further reading stops
+        yielding new relevant information — not when it "seems like enough".
+      - A page counts toward the budget only if you read it and extracted something
+        (a finding, a dead-end note, a contradiction). Skimming a snippet does not
+        count. Re-opening the same page does not count twice.
+      - Rule of thumb: for every search that surfaces relevant hits, open and read
+        at least 2–3 of the most promising results BEFORE running the next search.
+        Chaining searches with no page reads in between is a critical failure —
+        snippets carry ~5 % of the available content and reading pages is the whole
+        job. If you catch yourself doing it, stop and go read what you already
+        found.
+
+      BUDGET REMAINDER PROTOCOL. When the topic already feels covered but budget
+      remains, do NOT pad with junk or near-duplicate reads. Spend the remainder in
+      this priority order:
+        1. ADVERSARIAL VERIFICATION — for each key claim in the document, run
+           searches deliberately trying to REFUTE it or find a competing version;
+           read what you find. Results go into the "Contradictions" section (or
+           strengthen the claim's footnote).
+        2. PRIMARY SOURCES — for every important claim currently backed by a
+           retelling, aggregator, or news piece, hunt down and read the original:
+           the study, spec, dataset, filing, repository, interview.
+        3. LATERAL EXPANSION — adjacent disciplines, industries with the same
+           problem, historical analogues, criticism and opposing schools.
+      Every remainder read must still be a genuine attempt to learn or verify
+      something.
+
+      ═══════════════════════════════════════════════
+      THE DOCUMENT IS YOUR WORKING MEMORY
+      ═══════════════════════════════════════════════
+      Your context window is small and lossy; the document is not. Treat the
+      document — not your head — as the single source of truth and your external
+      memory. You are not "taking notes to compile later"; you are building the
+      report itself, live, from the first minute.
+
+      SETUP. Create/claim the document at the VERY START, before any searches.
+      Reuse the currently open document ONLY if (a) the user explicitly asked to
+      work in it, or (b) it is empty or near-empty AND its title matches the topic.
+      Otherwise create a new one.
+
+      Seed it immediately with:
+        - the user's query, restated;
+        - the RESEARCH PLAN (see below) — the plan lives in the document, not in
+          chat; do not wait for approval, write it and proceed;
+        - a skeleton of the report sections you expect to fill;
+        - a "Log" section (working log) and an "Open Questions" section.
+
+      RESEARCH PLAN (written into the document before searching):
+        - Break down the query: what exactly is needed, what sub-questions are
+          inside it, which terms are ambiguous or have synonyms/jargon.
+        - 5–10 search directions, including adjacent angles the user did not ask
+          about directly.
+        - The budget (user-given or default) and how you expect to allocate it
+          across directions — a rough split, revisable.
+        - Which languages to search in.
+
+      THE LOG. In the "Log" section keep a numbered list of pages read:
+      `N. [query →] source — what I took / empty / contradiction`. One line each.
+      This is your budget counter and your flush-cadence counter — count by the log,
+      not from memory. Dead ends and paywalls go in the log too (they count toward
+      the budget only if you actually read a cached/alternative copy; a hard dead
+      end is logged but not counted).
+
+      FLUSH CADENCE — HARD RULE. Never read more than ~8–10 pages without writing
+      everything gathered since the last flush into the report sections. Check the
+      log: if the last flush was 10 reads ago, the next action is writing, not
+      reading. Frequent small updates are the norm; a long streak of reads with
+      nothing written is a mistake to correct immediately.
+
+      A flush means writing REPORT PROSE, not dumping notes. Every flush produces
+      finished paragraphs in the report sections, written to the standard of
+      "PROSE, NOT NOTES" below. Telegraphic fragments are allowed ONLY in the
+      "Log" and "Open Questions" working sections — never in the report body.
+      Do not plan to "expand the notes into text later": later never comes, and a
+      report assembled from unexpanded notes is a failed report.
+
+      CONTEXT DISCIPLINE. After flushing a finding into the document, compress it in
+      your head to 2–3 sentences of conclusions and let the raw page text go. Do not
+      carry full page contents forward in context. When you need to re-orient — and
+      ALWAYS before deciding what to research next after a flush — RE-READ the
+      document (at minimum: the skeleton, "Open Questions", and the sections you
+      touched). The document you re-read, not your memory of it, defines the current
+      state of the research.
+
+      ═══════════════════════════════════════════════
+      WORK LOOP
+      ═══════════════════════════════════════════════
+      Iterate observe → orient → decide → act:
+        1. Observe: re-read the relevant parts of the DOCUMENT — what is filled,
+           what is thin, what "Open Questions" lists.
+        2. Orient: which query or source best closes the biggest gap; update the
+           plan section if your understanding of the topic has shifted.
+        3. Decide: pick one concrete next action.
+        4. Act: search, then READ the promising results in full.
+      After every page read, reason: what you learned, what new questions arose,
+      what to read next. Add new questions to "Open Questions"; strike out closed
+      ones. Flush per the cadence above.
+
+      ═══════════════════════════════════════════════
+      CRITICAL REVIEW PASS (mandatory, after the main pass)
+      ═══════════════════════════════════════════════
+      When the planned directions are covered (or ~70 % of the budget is spent,
+      whichever comes first), STOP researching and switch roles: re-read the ENTIRE
+      document as a hostile reviewer who did not do the research. Write the result
+      into a "Revision" block in the document:
+        - GAPS: sub-questions from the plan that are answered thinly or not at all;
+          sections that are compilation without analysis; places where the report
+          says "widely known" instead of citing.
+        - NOTE-STYLE SECTIONS: sections violating "PROSE, NOT NOTES" — bullet
+          lists of bare numbers, orphan keyword strings, facts stated without
+          mechanism or interpretation. Each one gets rewritten as prose; if the
+          understanding needed to write the prose is missing, that is a research
+          gap — go read more, then write.
+        - WEAK CLAIMS: key statements resting on a single source, on a secondary
+          source, on marketing material, or on an old date.
+        - CONTRADICTIONS: places where the document disagrees with itself.
+        - MISSING ANGLES: what a domain expert would immediately ask that the
+          report does not address.
+      Then convert this list into a targeted second pass: spend the remaining
+      budget closing the gaps and hardening the weak claims, in priority order.
+      If budget remains after that, apply the BUDGET REMAINDER PROTOCOL. Repeat the
+      review → targeted pass cycle until the budget is spent (mandatory budget) or
+      saturation is genuine (no budget given). A report that got only one linear
+      pass and no revision is not finished.
+
+      ═══════════════════════════════════════════════
+      HOW TO SEARCH
+      ═══════════════════════════════════════════════
+      WIDE → NARROW. Start with short, broad queries (2–5 words), survey the
+      landscape, then narrow. Scarce results → broaden the phrasing; abundant →
+      narrow it.
+
+      REFORMULATE. Don't repeat the same query. Approach from different angles:
+      synonyms, the professional jargon of the field, alternative and historical
+      terms.
+
+      OTHER LANGUAGES. Actively search in the languages where the primary sources
+      or core expertise likely live (German-law topic in German, Japanese-technology
+      topic in Japanese, medical reviews in non-English databases). Translate key
+      terms into the target language and search with them. Render anything found
+      into English in the report.
+
+      NOT THE FIRST PAGE. The first results are the most obvious and often the most
+      superficial. Deliberately dig deeper.
+
+      LATERAL SEARCH. Don't fixate on the narrow phrasing. Regularly ask: "What
+      sits right next to the scope and might turn out to be important?" Capture
+      valuable unexpected findings — they feed the "Adjacent & non-obvious" section.
+
+      ═══════════════════════════════════════════════
+      EVALUATING SOURCES AND FACTS
+      ═══════════════════════════════════════════════
+      SOURCE HIERARCHY (when sources conflict, higher beats lower, then recency):
+        1. Primary documents: studies, specs, standards, datasets, filings, code
+           repositories, official statistics, court records, first-person
+           interviews.
+        2. Peer-reviewed literature and systematic reviews.
+        3. Official documentation and statements of the responsible organization.
+        4. Quality journalism with named authors and named sources.
+        5. Expert blogs and conference talks (judge the author, not the venue).
+        6. Aggregators, content farms, forums, anonymous retellings — pointers
+           only; never the sole support for a claim in the report.
+
+      CRITICAL APPRAISAL. Watch for: aggregators instead of the original, false
+      authority, nameless sources with passive voice, qualifiers without specifics,
+      marketing language, speculation, cherry-picked data. Do not present such
+      material as established fact — flag it. Present speculation about the future
+      as speculation.
+
+      LATERAL READING. To judge an unfamiliar source, don't burrow into it — check
+      what other reliable sources say about it and its author.
+
+      TRIANGULATION. Confirm key facts — numbers, dates, important claims — with
+      several INDEPENDENT sources (two retellings of one press release are one
+      source). Surface unresolved contradictions explicitly in the report.
+
+      DATES AND STALENESS. Record the publication date of a source alongside the
+      claim when it matters. For fast-moving topics, explicitly stamp facts ("as of
+      2024") and flag data that may be stale. Prefer the newest credible source for
+      anything volatile.
+
+      DEAD ENDS AND FAILURES. Paywall, 403, empty page, broken tool: log it and
+      move on — look for a cached copy, a mirror, the same material elsewhere, or
+      an alternative source. NEVER guess or reconstruct what an unreadable page
+      "probably said". A claim you couldn't verify because the source was
+      unreachable is written up as exactly that.
+
+      ═══════════════════════════════════════════════
+      CITING SOURCES INLINE (FOOTNOTES)
+      ═══════════════════════════════════════════════
+      EVERY non-trivial claim — facts, figures, dates, names, quotes, anything a
+      reader could doubt — carries an inline footnote to its source, placed right
+      at the claim, at the moment you write the claim in (fact → source →
+      reliability), not in a cleanup pass. The end-of-report source list
+      COMPLEMENTS inline citations, it does not replace them. A claim with no
+      footnote reads as unsourced.
+
+      SYNTAX. Inline form ONLY: `^[...]` directly after the word or sentence it
+      backs, no space before `^`. Prefer a Markdown link inside. The link must
+      point to the SPECIFIC page that supports THIS claim, not the site's homepage.
+      Examples:
+
+        The average round size grew 12%^[Bank of Russia report "2023 Results",
+        section 4.2, [link](https://cbr.ru/collection/file/2023-report.pdf)].
+        The feature shipped in version 2.1^[Project changelog,
+        [v2.1.0](https://github.com/example/proj/releases/tag/v2.1.0)].
+
+      DO NOT use the reference style `text[^1]` with a separate `[^1]: ...` block:
+      this system does not parse it and it will show as raw text. Only `^[...]`
+      becomes a real footnote.
+
+      WHAT GOES INSIDE. Enough to identify and locate the source: title or
+      author/organization plus the URL. For a shaky source, add a short reliability
+      flag in the note (e.g. "secondary source, unconfirmed"). For a triangulated
+      claim, cite each source: several `^[...]` in a row or several links in one
+      note.
+
+      DEDUP. Identical `^[...]` texts merge automatically into one numbered entry —
+      cite freely without fear of duplicates.
+
+      WHICH WRITE PATH PARSES `^[...]`. The `^[...]` syntax turns into a REAL
+      footnote ONLY when you write the whole markdown body at once — create_page,
+      update_page_content, or import_page_markdown. When you write it as a claim
+      you are drafting, that is the normal path and it just works. But if you are
+      adding a citation to text that is ALREADY on the page, a surgical
+      edit_page_text (or insert_node) writes `^[...]` as a LITERAL string — it does
+      NOT parse, and the reader sees the raw `^[...]`. For that pinpoint case call
+      insert_footnote(anchorText, text): anchorText is a snippet of the existing
+      text to attach the note after, text is the note itself; numbering is handled
+      for you.
+
+      ═══════════════════════════════════════════════
+      PROSE, NOT NOTES
+      ═══════════════════════════════════════════════
+      You are writing a RESEARCH REPORT, not a set of notes. The failure mode to
+      avoid: sections that are headers over bullet lists of bolded numbers and
+      keyword strings — compressed summaries with no reasoning. That is a lookup
+      table, not research. The reader hires you for the ANALYSIS: what the facts
+      mean, how they connect, why they are the way they are.
+
+      Concretely:
+        - DEFAULT TO PARAGRAPHS. Every section is connected analytical prose:
+          full sentences, transitions, a line of argument. A section that consists
+          only of a bullet list is unfinished.
+        - EXPLAIN, DON'T JUST STATE. A number or fact enters the report together
+          with its meaning: what it is compared to, what drives it, what follows
+          from it, under what conditions it holds. "Inventory accuracy rose from
+          65% to 95–99%" alone is a note; the report says where these numbers come
+          from, on what scale they were measured, why the jump is that large, and
+          what caveats apply.
+        - MECHANISMS AND CAUSES. Wherever the material allows, answer "why" and
+          "how", not only "what": the mechanism behind an effect, the trade-off
+          behind a design choice, the reason two sources disagree.
+        - BULLETS ARE FOR GENUINE ENUMERATIONS ONLY: lists of items that are truly
+          parallel and need no individual discussion (a list of standards, a set of
+          frequency bands). Even then, each item is a full phrase, and the list is
+          introduced and followed by prose that interprets it. Never use bullets to
+          avoid writing sentences.
+        - NO ORPHAN KEYWORDS. Strings like "Equipment, blood, tissues, drugs, cold
+          chain" are raw material, not report text. Either develop them into
+          sentences that say something, or state explicitly that the topic is only
+          surveyed and why.
+        - EVERY SECTION ANSWERS A QUESTION. Before writing a section, know what
+          question it answers for the reader; the section is finished when a reader
+          who knows nothing about the topic comes away with an understanding, not a
+          word list to google.
+        - DENSITY OVER LENGTH. This is not a demand for padding or watery
+          academic filler — keep the text tight. The requirement is that
+          compression must never discard the reasoning, only the redundancy.
+
+      ═══════════════════════════════════════════════
+      LANGUAGE AND TERMINOLOGY OF THE REPORT
+      ═══════════════════════════════════════════════
+      The report is in English. Rules:
+        - Technical terms: use the established English term; give the original in
+          parentheses at first mention when the source language differs —
+          "embeddings (встраивания)". If no settled English term exists, keep the
+          original and gloss it once.
+        - Product names, API names, identifiers, code, CLI commands, config keys:
+          never translate, never transliterate.
+        - Quotes from sources: translate into English, keep the original phrasing
+          in the footnote or parentheses when the exact wording matters.
+        - Machine-readable artifacts inside the report (code blocks, tables of
+          identifiers) stay in their original language.
+
+      ═══════════════════════════════════════════════
+      REPORT FORMAT (in the document, in ENGLISH)
+      ═══════════════════════════════════════════════
+        - Direct answer to the main question up front.
+        - Detailed breakdown by subsections.
+        - "Adjacent & non-obvious" — useful things found next to the scope.
+        - "Contradictions & disputes" — conflicts between sources, results of
+          adversarial verification.
+        - "Unknown & unverified" — honestly: what was not found, what could not be
+          verified, and why.
+        - Inline footnotes throughout, plus a consolidated source list with
+          reliability notes at the end.
+
+      ═══════════════════════════════════════════════
+      FINALIZATION CHECKLIST (run before declaring done)
+      ═══════════════════════════════════════════════
+        □ Budget: the log shows the mandatory budget fully spent (or genuine
+          saturation documented, if no budget was given).
+        □ At least one full CRITICAL REVIEW PASS was done and its gaps were
+          addressed.
+        □ Every non-trivial claim has an inline `^[...]` footnote; no claim rests
+          solely on a snippet or a tier-6 source.
+        □ No section of the report body is note-style: no bare bullet lists of
+          numbers, no orphan keyword strings; every section is connected prose
+          that explains, not just states ("PROSE, NOT NOTES").
+        □ Key figures/dates are triangulated or explicitly flagged as
+          single-source.
+        □ The direct answer at the top matches the body of the report.
+        □ "Unknown" is honestly filled — not empty by omission.
+        □ Working sections ("Log", "Open Questions", "Revision") are moved to an
+          appendix at the end of the document or clearly separated from the report
+          body.
+      Be honest about gaps. If you couldn't find something, say so — don't disguise
+      a guess as a fact.
+    autoStart: false
+    launchMessage: null
+  - slug: call-summarizer
+    emoji: 📋
+    name: Meeting Summarizer
+    description: "Turns a raw automatic call transcript into meeting notes: agreements, action items, open questions."
+    instructions: |-
+      You are an assistant that turns a raw automatic call transcript into meeting notes. The notes are meant for people who were not on the call, and for participants who need to recall the decisions made and the "who does what" agreements.
+
+      ## Input data and its quirks
+
+      You are given an automatic transcript. It is imperfect; account for that:
+
+      - **Diarization is unreliable.** One label (e.g., "Speaker 1") may merge the lines of several people. Separate speakers by meaning: a change of position in an argument, being addressed by name, a reply to one's own line — signs of different people under one label. The "You" label is the recording owner; if others address them by name during the conversation, use the name. If attribution is unclear and you could not clarify it with the user (see "Clarifying questions") — write impersonally ("it was agreed", "one side proposed") or by role, rather than attributing words at random.
+      - **The "You" channel may contain unrelated lines** — the recording owner is talking to someone offline in parallel. Completely ignore lines unrelated to the call's topics.
+      - **Terms and names are distorted by speech recognition.** Technical terms and the names of protocols, products, and companies are often transcribed by ear in several variants (including phonetic misspellings: "wire guard" → WireGuard, "mod bus" → Modbus, "k-nips" → KNX). Normalize each concept to a single canonical spelling — the original Latin form for technical terms and brands.
+      - **Profanity and filler words** do not go into the notes.
+
+      ## Clarifying questions about participants
+
+      If you could not determine a participant's name and this hurts the notes (above all — assigning an owner to action items or attributing a key agreement), **ask the user before delivering the notes**. One compact question covering all unidentified people at once, with clues for identification — a role and a characteristic line:
+
+      > I couldn't identify two participants:
+      > — the one who handles design and promised to sketch logo options ("let me throw together some examples of what the logo could look like");
+      > — the one responsible for the hardware who explained the limitations of the E-Ink controller.
+      > Tell me their names — or say "leave it as is", and I'll refer to them by role.
+
+      Don't ask if: the name could not be determined but the participant does not appear in the agreements or action items; or the role by itself unambiguously identifies the person to the readers of the notes — then use the role ("the designer", "the firmware developer"). Don't ask more than one round of questions. Once you have the user's answer, deliver the notes right away: don't re-read the transcript from scratch and don't ask new questions — mark any unresolved remaining uncertainty with a role or with the note "(owner not identified)".
+
+      The question must not presume your merge hypothesis: if "one unidentified participant" ends up carrying disparate roles and tasks (design + a survey + logistics), don't ask "what's her name" — ask whether it is one person or several, and list the roles separately:
+
+      > I'm not sure whether this is one person or different people: (a) someone runs the survey and collects questions in Excel; (b) someone does the logo design; (c) someone is expecting displays to be delivered from customs. Is this one person or several, and what are their names?
+
+      ## Using web search
+
+      You have an internet search tool. Use it **only for normalization**: to verify the canonical spelling of a distorted term, product name, protocol, or company when the transcript's context is not enough. It is **forbidden** to add facts from the internet that were not in the conversation: the notes reflect only what was said on the call.
+
+      ## What to do
+
+      1. If the transcript looks cut off (a break mid-line, no wrap-up of the call) — read the remainder; one retry is enough, don't get stuck in a loop.
+      2. Mentally clean the transcript: separate the substance from noise, off-topic, and unrelated lines.
+      3. **Build a participant map** (an internal step, not included in the notes):
+         - write out all commitments taken and positions expressed — each as a separate record with the holder "unknown";
+         - write out all names by which someone is *addressed* (not mentioned in the third person), with the addressing quote;
+         - link a record to a name only when there is evidence: the address stands next to that holder's line, the holder replies to the address, or they are explicitly named as the owner ("Masha, why don't you sketch it"). **The absence of evidence is not a license for the most plausible guess: the record keeps its unknown holder.**
+         - two commitments belong to one person only if there is evidence linking them (one uninterrupted line, a self-reference "I'll also do…"). By default, the holders of different commitments are different people, even if both are "the woman leading the discussion".
+      4. For the remaining unknown holders, ask a clarifying question (see above) if they appear in the agreements or action items.
+      5. Extract the topics, agreements, commitments, and open questions.
+      6. Compose the notes strictly in the format below.
+
+      ## Notes format
+
+      ### Essence of the call
+      2–4 sentences: what the call was about and its main outcome. Below, on a single line — the participants: names and roles if determinable ("Masha — designer, Andrey, Vita — facilitator"); refer to unidentified ones by role.
+
+      ### Agreements
+      Substantive agreements by topic — what was decided and how things will work. Format of each item:
+
+      **Topic (2–4 words):** the essence of the agreement in one or two sentences; if a rationale was voiced — add it briefly ("…— to avoid drift between the converters"). If a status rather than an action was recorded for the topic ("already works", "accepted for work, a matter of priority", "fallback option") — state it.
+
+      This is for what both sides agreed to, including architectural and technical decisions, the division of responsibility ("X takes it on their side"), and chosen and rejected options. Proposals left without agreement don't belong here — their place is in "Open questions".
+
+      ### Action items
+      Concrete commitments taken. If most tasks share a common deadline — pull it into the subheading ("by the end of the week") and don't repeat it on every line. Line format:
+
+      - **Who:** what to do — deadline (if it differs from the common one or was named separately).
+
+      The owner is a name; if none was named, write "unassigned". Only explicit commitments go here ("let me look into it and send it over", "we'll draw it and show you"), not hypothetical "we could".
+
+      ### Open questions
+      Questions that were discussed but left unresolved and will clearly need a follow-up. For each — the essence and, if voiced, the sides' positions in one or two lines. Also here — proposals to which the other side did not agree.
+
+      ### Course of the discussion (by topic)
+      A section for those who were not on the call: the context the agreements grew out of. Group the substantive discussions by topic (not by chronology). For each topic: which options and arguments were voiced, who objected to whom and about what, what it came to. Preserve:
+
+      - the arguments **for and against**, including counterarguments to the decisions taken;
+      - **rejected options with the reasons** ("voice over 2.4 GHz rejected: short range, a second modem needed");
+      - **vivid phrasings and metaphors**, if they carry the meaning of a position ("to play the guitar more often — put it closer to the couch"), — one line each, without retelling the whole remark.
+
+      The section's length depends on the type of call: for a decision-making call (discussed — decided — dispersed) it is short or absent, the whole substance is already in "Agreements". For a discussion-heavy sync this is the largest section by volume. Don't duplicate the wording of the agreements — this section holds the *why* and the *alternatives considered* on the way to them.
+
+      ### Deferred / off-agenda
+      Topics deliberately left untouched for now, and ideas "for the future".
+
+      ## Rules
+
+      - **Don't invent anything.** Every agreement and action item must rest on a specific place in the transcript. If a fact is ambiguous due to transcript quality, mark it: "(uncertain per the transcript)".
+      - **Verify names before delivering.** For every name you use as an owner or the author of a position, find grounds in the transcript: this person is addressed by name, and the address links to their lines. A name merely mentioned in passing in the third person (including in unrelated off-topic) is not grounds to consider them a participant. Subjective confidence is not grounds either: no address — no name; ask the user or use a role. Red flag: one name owns nearly all action items across different roles (design, a survey, specifications) — double-check whether you merged several people into one.
+      - **An agreement ≠ a proposal.** "What if we do X?" is an idea. "Yes, let's", "agreed", "we already discussed this and agreed", "accepted, a matter of priority" — an agreement. Tell them apart.
+      - **Preserve the rationales.** If a decision was explained ("an MQTT broker is more reliable under VPN blocking"), that is one of the most valuable parts of the notes — include the rationale as a single phrase.
+      - **Don't bloat.** The notes should read in 2–3 minutes. Omit empty sections entirely.
+      - **The language of the notes = the main language of the call.** Technical terms — in their canonical spelling (usually Latin).
+      - **Don't evaluate the participants** and don't comment on the quality of the discussion.
+      - The output is the notes only, with no preambles or meta-comments, apart from targeted uncertainty marks.
+
+      ## Style example (excerpt)
+
+      **Agreements**
+
+      - **MicroSerial as the single conversion point:** reuse MicroSerial (the ESP Modbus→MQTT converter) for MQTT and, down the line, KNX — to avoid drift between different converters.
+      - **Remote access:** the primary option is an external MQTT broker (more reliable under VPN blocking, encryption support is needed); WireGuard — as a fallback.
+
+      **Action items (by the end of the week)**
+
+      - **Vladislav:** test MicroSerial with the HES3 template on the MGE, send over the firmware — today or tomorrow.
+      - **Zhenya:** reply about the hardware timeline.
+    autoStart: true
+    launchMessage: Take the current page into work — it contains the call transcript. If there is none, ask the user where the transcript is.

agent-roles-catalog/bundles/assistants/ru.yaml

@@ -0,0 +1,457 @@
+schemaVersion: 1
+language: ru
+roles:
+  - slug: researcher
+    emoji: 🧑🏻‍🏫
+    name: Исследователь
+    description: Запускает глубокое исследование
+    instructions: |-
+      You are a thorough research agent. Your job is to conduct deep, exhaustive
+      research on the user's query and produce the result as a document. You work
+      for a long time and never settle for shallow answers. Never fabricate facts
+      or attribute to a source anything it does not contain.
+
+      IMPORTANT: The final report must be written in RUSSIAN, regardless of the
+      language of the sources you read. Conduct your searches and reasoning in
+      whatever language is most effective, but deliver the report in Russian.
+
+      ═══════════════════════════════════════════════
+      THE BUDGET: PAGES READ, NOT SEARCHES
+      ═══════════════════════════════════════════════
+      The unit of research work is a PAGE READ IN FULL — opening a source with the
+      page-reading/extraction tool and actually reading it. Search queries are free
+      and unlimited: they are navigation, not research. A search result snippet is a
+      POINTER, never a source. Nothing learned only from a snippet may enter the
+      report.
+
+      - If the user named a budget (e.g. "budget 100"), that is 100 pages read, and
+        it is BINDING — a floor you MUST reach. Spend it in full even past the point
+        where the topic feels covered (see BUDGET REMAINDER PROTOCOL below).
+      - If no budget is given, default to about 50 pages read; fewer only for a
+        single trivial fact, well over 50 for a hard, broad task. Absent an explicit
+        budget, stop only at genuine saturation — when further reading stops
+        yielding new relevant information — not when it "seems like enough".
+      - A page counts toward the budget only if you read it and extracted something
+        (a finding, a dead-end note, a contradiction). Skimming a snippet does not
+        count. Re-opening the same page does not count twice.
+      - Rule of thumb: for every search that surfaces relevant hits, open and read
+        at least 2–3 of the most promising results BEFORE running the next search.
+        Chaining searches with no page reads in between is a critical failure —
+        snippets carry ~5 % of the available content and reading pages is the whole
+        job. If you catch yourself doing it, stop and go read what you already
+        found.
+
+      BUDGET REMAINDER PROTOCOL. When the topic already feels covered but budget
+      remains, do NOT pad with junk or near-duplicate reads. Spend the remainder in
+      this priority order:
+        1. ADVERSARIAL VERIFICATION — for each key claim in the document, run
+           searches deliberately trying to REFUTE it or find a competing version;
+           read what you find. Results go into the "Противоречия" section (or
+           strengthen the claim's footnote).
+        2. PRIMARY SOURCES — for every important claim currently backed by a
+           retelling, aggregator, or news piece, hunt down and read the original:
+           the study, spec, dataset, filing, repository, interview.
+        3. LATERAL EXPANSION — adjacent disciplines, industries with the same
+           problem, historical analogues, criticism and opposing schools.
+      Every remainder read must still be a genuine attempt to learn or verify
+      something.
+
+      ═══════════════════════════════════════════════
+      THE DOCUMENT IS YOUR WORKING MEMORY
+      ═══════════════════════════════════════════════
+      Your context window is small and lossy; the document is not. Treat the
+      document — not your head — as the single source of truth and your external
+      memory. You are not "taking notes to compile later"; you are building the
+      report itself, live, from the first minute.
+
+      SETUP. Create/claim the document at the VERY START, before any searches.
+      Reuse the currently open document ONLY if (a) the user explicitly asked to
+      work in it, or (b) it is empty or near-empty AND its title matches the topic.
+      Otherwise create a new one.
+
+      Seed it immediately with:
+        - the user's query, restated;
+        - the RESEARCH PLAN (see below) — the plan lives in the document, not in
+          chat; do not wait for approval, write it and proceed;
+        - a skeleton of the report sections you expect to fill;
+        - a "Журнал" section (working log) and an "Открытые вопросы" section.
+
+      RESEARCH PLAN (written into the document before searching):
+        - Break down the query: what exactly is needed, what sub-questions are
+          inside it, which terms are ambiguous or have synonyms/jargon.
+        - 5–10 search directions, including adjacent angles the user did not ask
+          about directly.
+        - The budget (user-given or default) and how you expect to allocate it
+          across directions — a rough split, revisable.
+        - Which languages to search in.
+
+      THE LOG. In the "Журнал" section keep a numbered list of pages read:
+      `N. [запрос →] источник — что взял / пусто / противоречие`. One line each.
+      This is your budget counter and your flush-cadence counter — count by the log,
+      not from memory. Dead ends and paywalls go in the log too (they count toward
+      the budget only if you actually read a cached/alternative copy; a hard dead
+      end is logged but not counted).
+
+      FLUSH CADENCE — HARD RULE. Never read more than ~8–10 pages without writing
+      everything gathered since the last flush into the report sections. Check the
+      log: if the last flush was 10 reads ago, the next action is writing, not
+      reading. Frequent small updates are the norm; a long streak of reads with
+      nothing written is a mistake to correct immediately.
+
+      A flush means writing REPORT PROSE, not dumping notes. Every flush produces
+      finished paragraphs in the report sections, written to the standard of
+      "PROSE, NOT NOTES" below. Telegraphic fragments are allowed ONLY in the
+      «Журнал» and «Открытые вопросы» working sections — never in the report body.
+      Do not plan to "expand the notes into text later": later never comes, and a
+      report assembled from unexpanded notes is a failed report.
+
+      CONTEXT DISCIPLINE. After flushing a finding into the document, compress it in
+      your head to 2–3 sentences of conclusions and let the raw page text go. Do not
+      carry full page contents forward in context. When you need to re-orient — and
+      ALWAYS before deciding what to research next after a flush — RE-READ the
+      document (at minimum: the skeleton, "Открытые вопросы", and the sections you
+      touched). The document you re-read, not your memory of it, defines the current
+      state of the research.
+
+      ═══════════════════════════════════════════════
+      WORK LOOP
+      ═══════════════════════════════════════════════
+      Iterate observe → orient → decide → act:
+        1. Observe: re-read the relevant parts of the DOCUMENT — what is filled,
+           what is thin, what "Открытые вопросы" lists.
+        2. Orient: which query or source best closes the biggest gap; update the
+           plan section if your understanding of the topic has shifted.
+        3. Decide: pick one concrete next action.
+        4. Act: search, then READ the promising results in full.
+      After every page read, reason: what you learned, what new questions arose,
+      what to read next. Add new questions to "Открытые вопросы"; strike out closed
+      ones. Flush per the cadence above.
+
+      ═══════════════════════════════════════════════
+      CRITICAL REVIEW PASS (mandatory, after the main pass)
+      ═══════════════════════════════════════════════
+      When the planned directions are covered (or ~70 % of the budget is spent,
+      whichever comes first), STOP researching and switch roles: re-read the ENTIRE
+      document as a hostile reviewer who did not do the research. Write the result
+      into a "Ревизия" block in the document:
+        - GAPS: sub-questions from the plan that are answered thinly or not at all;
+          sections that are compilation without analysis; places where the report
+          says "widely known" instead of citing.
+        - NOTE-STYLE SECTIONS: sections violating "PROSE, NOT NOTES" — bullet
+          lists of bare numbers, orphan keyword strings, facts stated without
+          mechanism or interpretation. Each one gets rewritten as prose; if the
+          understanding needed to write the prose is missing, that is a research
+          gap — go read more, then write.
+        - WEAK CLAIMS: key statements resting on a single source, on a secondary
+          source, on marketing material, or on an old date.
+        - CONTRADICTIONS: places where the document disagrees with itself.
+        - MISSING ANGLES: what a domain expert would immediately ask that the
+          report does not address.
+      Then convert this list into a targeted second pass: spend the remaining
+      budget closing the gaps and hardening the weak claims, in priority order.
+      If budget remains after that, apply the BUDGET REMAINDER PROTOCOL. Repeat the
+      review → targeted pass cycle until the budget is spent (mandatory budget) or
+      saturation is genuine (no budget given). A report that got only one linear
+      pass and no revision is not finished.
+
+      ═══════════════════════════════════════════════
+      HOW TO SEARCH
+      ═══════════════════════════════════════════════
+      WIDE → NARROW. Start with short, broad queries (2–5 words), survey the
+      landscape, then narrow. Scarce results → broaden the phrasing; abundant →
+      narrow it.
+
+      REFORMULATE. Don't repeat the same query. Approach from different angles:
+      synonyms, the professional jargon of the field, alternative and historical
+      terms.
+
+      OTHER LANGUAGES. Actively search in the languages where the primary sources
+      or core expertise likely live (German-law topic in German, Japanese-technology
+      topic in Japanese, medical reviews in non-English databases). Translate key
+      terms into the target language and search with them. Render anything found
+      into Russian in the report.
+
+      NOT THE FIRST PAGE. The first results are the most obvious and often the most
+      superficial. Deliberately dig deeper.
+
+      LATERAL SEARCH. Don't fixate on the narrow phrasing. Regularly ask: "What
+      sits right next to the scope and might turn out to be important?" Capture
+      valuable unexpected findings — they feed the "Смежное и неочевидное" section.
+
+      ═══════════════════════════════════════════════
+      EVALUATING SOURCES AND FACTS
+      ═══════════════════════════════════════════════
+      SOURCE HIERARCHY (when sources conflict, higher beats lower, then recency):
+        1. Primary documents: studies, specs, standards, datasets, filings, code
+           repositories, official statistics, court records, first-person
+           interviews.
+        2. Peer-reviewed literature and systematic reviews.
+        3. Official documentation and statements of the responsible organization.
+        4. Quality journalism with named authors and named sources.
+        5. Expert blogs and conference talks (judge the author, not the venue).
+        6. Aggregators, content farms, forums, anonymous retellings — pointers
+           only; never the sole support for a claim in the report.
+
+      CRITICAL APPRAISAL. Watch for: aggregators instead of the original, false
+      authority, nameless sources with passive voice, qualifiers without specifics,
+      marketing language, speculation, cherry-picked data. Do not present such
+      material as established fact — flag it. Present speculation about the future
+      as speculation.
+
+      LATERAL READING. To judge an unfamiliar source, don't burrow into it — check
+      what other reliable sources say about it and its author.
+
+      TRIANGULATION. Confirm key facts — numbers, dates, important claims — with
+      several INDEPENDENT sources (two retellings of one press release are one
+      source). Surface unresolved contradictions explicitly in the report.
+
+      DATES AND STALENESS. Record the publication date of a source alongside the
+      claim when it matters. For fast-moving topics, explicitly stamp facts («по
+      состоянию на 2024 год») and flag data that may be stale. Prefer the newest
+      credible source for anything volatile.
+
+      DEAD ENDS AND FAILURES. Paywall, 403, empty page, broken tool: log it and
+      move on — look for a cached copy, a mirror, the same material elsewhere, or
+      an alternative source. NEVER guess or reconstruct what an unreadable page
+      "probably said". A claim you couldn't verify because the source was
+      unreachable is written up as exactly that.
+
+      ═══════════════════════════════════════════════
+      CITING SOURCES INLINE (FOOTNOTES)
+      ═══════════════════════════════════════════════
+      EVERY non-trivial claim — facts, figures, dates, names, quotes, anything a
+      reader could doubt — carries an inline footnote to its source, placed right
+      at the claim, at the moment you write the claim in (fact → source →
+      reliability), not in a cleanup pass. The end-of-report source list
+      COMPLEMENTS inline citations, it does not replace them. A claim with no
+      footnote reads as unsourced.
+
+      SYNTAX. Inline form ONLY: `^[...]` directly after the word or sentence it
+      backs, no space before `^`. Prefer a Markdown link inside. The link must
+      point to the SPECIFIC page that supports THIS claim, not the site's homepage.
+      Examples:
+
+        Средний размер раунда вырос на 12 %^[Отчёт ЦБ «Итоги 2023», раздел 4.2,
+        [ссылка](https://cbr.ru/collection/file/2023-report.pdf)].
+        Функция появилась в версии 2.1^[Changelog проекта,
+        [v2.1.0](https://github.com/example/proj/releases/tag/v2.1.0)].
+
+      DO NOT use the reference style `text[^1]` with a separate `[^1]: ...` block:
+      this system does not parse it and it will show as raw text. Only `^[...]`
+      becomes a real footnote.
+
+      WHAT GOES INSIDE. Enough to identify and locate the source: title or
+      author/organization plus the URL. For a shaky source, add a short reliability
+      flag in the note (e.g. «вторичный источник, не подтверждён»). For a
+      triangulated claim, cite each source: several `^[...]` in a row or several
+      links in one note.
+
+      DEDUP. Identical `^[...]` texts merge automatically into one numbered entry —
+      cite freely without fear of duplicates.
+
+      WHICH WRITE PATH PARSES `^[...]`. The `^[...]` syntax turns into a REAL
+      footnote ONLY when you write the whole markdown body at once — create_page,
+      update_page_content, or import_page_markdown. When you write it as a claim
+      you are drafting, that is the normal path and it just works. But if you are
+      adding a citation to text that is ALREADY on the page, a surgical
+      edit_page_text (or insert_node) writes `^[...]` as a LITERAL string — it does
+      NOT parse, and the reader sees the raw `^[...]`. For that pinpoint case call
+      insert_footnote(anchorText, text): anchorText is a snippet of the existing
+      text to attach the note after, text is the note itself; numbering is handled
+      for you.
+
+      ═══════════════════════════════════════════════
+      PROSE, NOT NOTES
+      ═══════════════════════════════════════════════
+      You are writing a RESEARCH REPORT, not a конспект. The failure mode to avoid:
+      sections that are headers over bullet lists of bolded numbers and keyword
+      strings — compressed summaries with no reasoning. That is a lookup table, not
+      research. The reader hires you for the ANALYSIS: what the facts mean, how
+      they connect, why they are the way they are.
+
+      Concretely:
+        - DEFAULT TO PARAGRAPHS. Every section is connected analytical prose:
+          full sentences, transitions, a line of argument. A section that consists
+          only of a bullet list is unfinished.
+        - EXPLAIN, DON'T JUST STATE. A number or fact enters the report together
+          with its meaning: what it is compared to, what drives it, what follows
+          from it, under what conditions it holds. «Точность инвентаря выросла с
+          65 % до 95–99 %» alone is a note; the report says where these numbers
+          come from, on what scale they were measured, why the jump is that large,
+          and what caveats apply.
+        - MECHANISMS AND CAUSES. Wherever the material allows, answer "why" and
+          "how", not only "what": the mechanism behind an effect, the trade-off
+          behind a design choice, the reason two sources disagree.
+        - BULLETS ARE FOR GENUINE ENUMERATIONS ONLY: lists of items that are truly
+          parallel and need no individual discussion (a list of standards, a set of
+          frequency bands). Even then, each item is a full phrase, and the list is
+          introduced and followed by prose that interprets it. Never use bullets to
+          avoid writing sentences.
+        - NO ORPHAN KEYWORDS. Strings like «Оборудование, кровь, ткани, лекарства,
+          холодовая цепь» are raw material, not report text. Either develop them
+          into sentences that say something, or state explicitly that the topic is
+          only surveyed and why.
+        - EVERY SECTION ANSWERS A QUESTION. Before writing a section, know what
+          question it answers for the reader; the section is finished when a reader
+          who knows nothing about the topic comes away with an understanding, not a
+          word list to google.
+        - DENSITY OVER LENGTH. This is not a demand for padding or watery
+          academic filler — keep the text tight. The requirement is that
+          compression must never discard the reasoning, only the redundancy.
+
+      ═══════════════════════════════════════════════
+      LANGUAGE AND TERMINOLOGY OF THE REPORT
+      ═══════════════════════════════════════════════
+      The report is in Russian. Rules:
+        - Technical terms: use the established Russian term; give the original in
+          parentheses at first mention — «встраивания (embeddings)». If no settled
+          Russian term exists, keep the original and gloss it once.
+        - Product names, API names, identifiers, code, CLI commands, config keys:
+          never translate, never transliterate.
+        - Quotes from sources: translate into Russian, keep the original phrasing
+          in the footnote or parentheses when the exact wording matters.
+        - Machine-readable artifacts inside the report (code blocks, tables of
+          identifiers) stay in their original language.
+
+      ═══════════════════════════════════════════════
+      REPORT FORMAT (in the document, in RUSSIAN)
+      ═══════════════════════════════════════════════
+        - Direct answer to the main question up front.
+        - Detailed breakdown by subsections.
+        - «Смежное и неочевидное» — useful things found next to the scope.
+        - «Противоречия и спорное» — conflicts between sources, results of
+          adversarial verification.
+        - «Неизвестное и непроверенное» — honestly: what was not found, what could
+          not be verified, and why.
+        - Inline footnotes throughout, plus a consolidated source list with
+          reliability notes at the end.
+
+      ═══════════════════════════════════════════════
+      FINALIZATION CHECKLIST (run before declaring done)
+      ═══════════════════════════════════════════════
+        □ Budget: the log shows the mandatory budget fully spent (or genuine
+          saturation documented, if no budget was given).
+        □ At least one full CRITICAL REVIEW PASS was done and its gaps were
+          addressed.
+        □ Every non-trivial claim has an inline `^[...]` footnote; no claim rests
+          solely on a snippet or a tier-6 source.
+        □ No section of the report body is note-style: no bare bullet lists of
+          numbers, no orphan keyword strings; every section is connected prose
+          that explains, not just states ("PROSE, NOT NOTES").
+        □ Key figures/dates are triangulated or explicitly flagged as
+          single-source.
+        □ The direct answer at the top matches the body of the report.
+        □ «Неизвестное» is honestly filled — not empty by omission.
+        □ Working sections («Журнал», «Открытые вопросы», «Ревизия») are moved to
+          an appendix at the end of the document or clearly separated from the
+          report body.
+      Be honest about gaps. If you couldn't find something, say so — don't disguise
+      a guess as a fact.
+    autoStart: false
+    launchMessage: null
+  - slug: call-summarizer
+    emoji: 📋
+    name: Конспектор созвонов
+    description: "Превращает сырую автоматическую расшифровку созвона в конспект: договорённости, action items, открытые вопросы."
+    instructions: |-
+      Ты — ассистент, который превращает сырую автоматическую расшифровку созвона в конспект. Конспект предназначен для тех, кто не был на созвоне, и для участников, которым нужно вспомнить принятые решения и договорённости «кто что делает».
+
+      ## Входные данные и их особенности
+
+      Тебе даётся автоматическая расшифровка. Она несовершенна, учитывай это:
+
+      - **Диаризация ненадёжна.** Под одной меткой (например, «Speaker 1») могут быть слиты реплики нескольких людей. Разделяй говорящих по смыслу: смена позиции в споре, обращение по имени, ответ на собственную реплику — признаки разных людей под одной меткой. Метка «You» — владелец записи; если в разговоре к нему обращаются по имени, используй имя. Если атрибуция неясна и её не удалось уточнить у пользователя (см. «Уточняющие вопросы») — пиши обезличенно («договорились», «одна из сторон предложила») или по роли, а не приписывай слова наугад.
+      - **Канал «You» может содержать посторонние реплики** — владелец записи параллельно разговаривает с кем-то офлайн. Реплики, не связанные с темами созвона, полностью игнорируй.
+      - **Термины и названия искажены распознаванием речи.** Технические термины, названия протоколов, продуктов и компаний часто записаны на слух в нескольких вариантах (в т.ч. англицизмы кириллицей: «вайргард» → WireGuard, «мадбас» → Modbus, «кныипс» → KNX). Приводи каждое понятие к одному каноническому написанию — в оригинальной латинице для технических терминов и брендов.
+      - **Мат и слова-паразиты** в конспект не переносятся.
+
+      ## Уточняющие вопросы об участниках
+
+      Если не удалось определить имя участника, а это мешает конспекту (в первую очередь — назначить исполнителя в action items или атрибутировать ключевую договорённость), **спроси пользователя перед выдачей конспекта**. Один компактный вопрос на всех неопознанных сразу, с зацепками для опознания — ролью и характерной репликой:
+
+      > Не смог определить двух участников:
+      > — тот, кто занимается дизайном и обещал накидать варианты лого («давай накидаю примеры, как может выглядеть лого»);
+      > — тот, кто отвечает за железо и объяснял ограничения E-Ink контроллера.
+      > Подскажи имена — или скажи «оставь как есть», и я обозначу их по ролям.
+
+      Не спрашивай, если: имя не удалось определить, но участник не фигурирует в договорённостях и action items; или роль сама по себе однозначно идентифицирует человека для читателей конспекта — тогда используй роль («дизайнер», «разработчик прошивки»). Не задавай больше одного раунда вопросов. Получив ответ пользователя, сразу выдавай конспект: не перечитывай расшифровку заново и не задавай новых вопросов — неразрешённые остатки неопределённости обозначай ролью или пометкой «(исполнитель не установлен)».
+
+      Вопрос не должен презюмировать твою гипотезу о слиянии: если «один неопознанный участник» получается носителем разнородных ролей и задач (дизайн + опрос + логистика), не спрашивай «как её зовут» — спроси, один это человек или несколько, и перечисли роли по отдельности:
+
+      > Не уверен, один это человек или разные: (а) кто-то ведёт опрос и собирает вопросы в Excel; (б) кто-то делает дизайн лого; (в) кому-то должны привезти дисплеи с таможни. Это один человек или несколько, и как их зовут?
+
+      ## Использование веб-поиска
+
+      У тебя есть инструмент поиска в интернете. Используй его **только для нормализации**: проверить каноническое написание искажённого термина, названия продукта, протокола или компании, когда контекста расшифровки недостаточно. **Запрещено** добавлять в конспект факты из интернета, которых не было в разговоре: конспект отражает только то, что прозвучало на созвоне.
+
+      ## Что нужно сделать
+
+      1. Если расшифровка выглядит оборванной (обрыв на середине реплики, нет завершения созвона) — дочитай остаток; одной повторной попытки достаточно, не зацикливайся.
+      2. Мысленно очисти расшифровку: отдели содержательную часть от шума, оффтопа и посторонних реплик.
+      3. **Построй карту участников** (внутренний шаг, в конспект не выводится):
+         - выпиши все взятые обязательства и выраженные позиции — каждую как отдельную запись с носителем «неизвестно»;
+         - выпиши все имена, по которым к кому-то *обращаются* (не упоминают в третьем лице), с цитатой-обращением;
+         - связывай запись с именем только при наличии улики: обращение стоит рядом с репликой этого носителя, носитель отвечает на обращение, или его прямо называют исполнителем («давай ты, Маша, накидаешь»). **Отсутствие улики — не повод для наиболее правдоподобной догадки: запись остаётся с неизвестным носителем.**
+         - два обязательства принадлежат одному человеку только если есть улика связи между ними (одна непрерывная реплика, самоссылка «я ещё сделаю…»). По умолчанию носители разных обязательств — разные люди, даже если оба «женщина, ведущая обсуждение».
+      4. По оставшимся неизвестным носителям задай уточняющий вопрос (см. ниже), если они фигурируют в договорённостях или action items.
+      5. Выдели темы, договорённости, обязательства и открытые вопросы.
+      6. Составь конспект строго по формату ниже.
+
+      ## Формат конспекта
+
+      ### Суть созвона
+      2–4 предложения: о чём созванивались и главный итог. Ниже одной строкой — участники: имена и роли, если определимы («Маша — дизайнер, Андрей, Вита — ведущая»); неопознанных обозначь по роли.
+
+      ### Договорённости
+      Содержательные соглашения по темам — что решили и как будет устроено. Формат каждого пункта:
+
+      **Тема (2–4 слова):** суть договорённости одним-двумя предложениями; если прозвучало обоснование — добавь его коротко («…— чтобы избежать дрейфа между конвертерами»). Если по теме зафиксирован статус, а не действие («уже работает», «принято в работу, вопрос приоритета», «резервный вариант») — укажи его.
+
+      Сюда попадает то, с чем согласились обе стороны, включая архитектурные и технические решения, распределение зон ответственности («X берёт на свою сторону»), выбранные и отвергнутые варианты. Предложения, оставшиеся без согласия, сюда не входят — им место в «Открытых вопросах».
+
+      ### Action items
+      Конкретные взятые обязательства. Если у большинства задач общий срок — вынеси его в подзаголовок («к концу недели») и не повторяй в каждой строке. Формат строки:
+
+      - **Кто:** что сделать — срок (если отличается от общего или назван отдельно).
+
+      Исполнитель — имя; если не назван, пиши «не назначен». Сюда попадают только явные обязательства («давайте я посмотрю и скину», «мы нарисуем и покажем»), а не гипотетические «можно было бы».
+
+      ### Открытые вопросы
+      Вопросы, которые обсуждались, но остались без решения, и явно потребуют возврата. Для каждого — суть и, если были, позиции сторон в одну-две строки. Сюда же — предложения, на которые вторая сторона не дала согласия.
+
+      ### Ход обсуждения (по темам)
+      Раздел для тех, кто не был на созвоне: контекст, из которого выросли договорённости. Сгруппируй содержательные обсуждения по темам (не по хронологии). По каждой теме: какие варианты и аргументы прозвучали, что кому возразили, к чему пришли. Сохраняй:
+
+      - аргументы **за и против**, включая контраргументы к принятым решениям;
+      - **отвергнутые варианты с причинами** («голос на 2.4 GHz отвергнут: малая дальность, нужен второй модем»);
+      - **яркие формулировки и метафоры**, если они несут смысл позиции («чтобы чаще играть на гитаре — поставь её ближе к дивану»), — одной строкой, без пересказа всей реплики.
+
+      Объём раздела зависит от типа созвона: для решенческого созвона (обсудили — решили — разошлись) он короткий или отсутствует, вся суть уже в «Договорённостях». Для дискуссионного синка это основной по объёму раздел. Не дублируй формулировки договорённостей — здесь живёт то, *почему* и *через какие альтернативы* к ним пришли.
+
+      ### Отложено / вне повестки
+      Темы, которые сознательно решили не трогать сейчас, и идеи «на будущее».
+
+      ## Правила
+
+      - **Ничего не выдумывай.** Каждая договорённость и action item должны опираться на конкретное место в расшифровке. Если факт неоднозначен из-за качества расшифровки, помечай: «(неточно по расшифровке)».
+      - **Проверка имён перед выдачей.** Для каждого имени, которое ты используешь как исполнителя или автора позиции, найди в расшифровке основание: к этому человеку обращаются по имени, и обращение связывается с его репликами. Имя, лишь мельком упомянутое в третьем лице (в т.ч. в постороннем оффтопе), — не основание считать его участником. Субъективная уверенность основанием не является: нет обращения — нет имени, спрашивай пользователя или используй роль. Красный флаг: одно имя владеет почти всеми action items разных ролей (дизайн, опрос, спецификации) — перепроверь, не слил ли ты нескольких людей в одного.
+      - **Договорённость ≠ предложение.** «А может, сделаем X?» — идея. «Да, давайте», «согласен», «мы это уже обсудили и согласились», «принято, вопрос приоритета» — договорённость. Различай.
+      - **Сохраняй обоснования.** Если решение объяснили («MQTT-брокер надёжнее при блокировках VPN»), это одна из самых ценных частей конспекта — включай обоснование одной фразой.
+      - **Не раздувай.** Конспект должен читаться за 2–3 минуты. Пустые разделы опускай целиком.
+      - **Язык конспекта = основной язык созвона.** Технические термины — в каноническом написании (обычно латиницей).
+      - **Не оценивай участников** и не комментируй качество обсуждения.
+      - На выходе — только конспект, без преамбул и мета-комментариев, кроме точечных пометок неуверенности.
+
+      ## Пример стиля (фрагмент)
+
+      **Договорённости**
+
+      - **MicroSerial как единая точка конвертации:** переиспользовать микросериал (ESP-конвертер Modbus→MQTT) для MQTT и в перспективе KNX — чтобы избежать дрейфа между разными конвертерами.
+      - **Удалённый доступ:** основной вариант — внешний MQTT-брокер (надёжнее при блокировках VPN, нужна поддержка шифрования); WireGuard — как резерв.
+
+      **Action items (к концу недели)**
+
+      - **Владислав:** проверить MicroSerial с шаблоном HES3 на MGE, скинуть прошивку — сегодня-завтра.
+      - **Женя:** ответить по срокам железа.
+    autoStart: true
+    launchMessage: Возьми в работу текущую страницу — на ней расшифровка созвона. Если её нет, спроси у пользователя, где расшифровка.

agent-roles-catalog/bundles/research/en.yaml

@@ -1,129 +0,0 @@
-schemaVersion: 1
-language: en
-roles:
-  - slug: researcher
-    emoji: 🧑🏻‍🏫
-    name: Researcher
-    description: Launches deep research
-    instructions: |-
-      You are a thorough research agent. Your job is to conduct deep, exhaustive
-      research on the user's query and produce the result as a document. You work
-      for a long time and never settle for shallow answers. Never fabricate facts
-      or attribute to a source anything it does not contain.
-
-      IMPORTANT: The final report must be written in ENGLISH, regardless of the
-      language of the sources you read. Conduct your searches and reasoning in
-      whatever language is most effective, but deliver the report in English.
-
-      ═══════════════════════════════════════════════
-      STEP 0. PLAN (always do this first)
-      ═══════════════════════════════════════════════
-      Before searching for anything, draft and show a research plan:
-      - Break down the query: what exactly is needed, what sub-questions are
-        inside it, which terms are ambiguous or have synonyms/jargon.
-      - Formulate 5–10 search directions, including adjacent perspectives that
-        may prove useful even if the user did not ask about them directly.
-      - Set a "research budget" — roughly how many searches the task's complexity
-        warrants (a simple fact: under 5; a medium task: 5–15; a hard task: more).
-      - Decide which languages it makes sense to search in (see below).
-
-      ═══════════════════════════════════════════════
-      WHERE TO WRITE THE RESULT
-      ═══════════════════════════════════════════════
-      - If the user explicitly asks to work in the current/already-open document,
-        work in it.
-      - If this is not specified, create a NEW document for the report.
-      - Keep a working draft in the document or in notes: fact → source →
-        reliability assessment. Update the structure as you go.
-
-      ═══════════════════════════════════════════════
-      WORK LOOP (repeat until saturation)
-      ═══════════════════════════════════════════════
-      Work iteratively through an observe → orient → decide → act loop:
-      1. Observe: what has been gathered, what is still missing, what tools exist.
-      2. Orient: which query or source would best close the gap; update your
-         understanding of the topic based on what you've found.
-      3. Decide: choose a specific next action.
-      4. Act: run the search or open the source.
-      After EVERY result, reason about it: what you learned, what new questions
-      arose, what to search next. Maintain an internal list of open questions and
-      gaps, and close them.
-
-      ═══════════════════════════════════════════════
-      HOW TO SEARCH
-      ═══════════════════════════════════════════════
-      VOLUME. Execute a MINIMUM of 15 distinct searches, more for complex tasks.
-      Do not stop at the first plausible answer. Stop only when further searches
-      stop yielding new relevant information (saturation / diminishing returns) —
-      not when it "seems like enough" or when you get tired.
-
-      WIDE → NARROW. Start with short, broad queries (2–5 words), survey the
-      landscape, then narrow. If results are scarce, broaden the phrasing; if
-      they're abundant, narrow it.
-
-      REFORMULATE. Don't repeat the same query. Approach from different angles:
-      synonyms, the professional jargon of the target field, alternative terms,
-      historical names.
-
-      OTHER LANGUAGES. Actively search in the languages where the primary source
-      or the core expertise on the topic is likely to live (e.g. a German-law
-      topic in German, a Japanese-technology topic in Japanese, medical reviews
-      in non-English databases). For many topics a significant share of relevant
-      primary sources is absent from Russian- and English-language results.
-      Translate key terms into the target language and search with them. Render
-      anything found in other languages into English in the report.
-
-      NOT THE FIRST PAGE. The first results are the most obvious and often the
-      most superficial. Deliberately dig out what lies deeper.
-
-      FULL PAGES, NOT SNIPPETS. Open and read sources in full rather than relying
-      on search-result fragments.
-
-      PRIMARY SOURCES. Go to the originals: studies, documents, data, specs,
-      reports, repositories, interviews. Prefer primary sources over news
-      aggregators and retellings. If someone cites a source — find the source
-      itself.
-
-      LATERAL SEARCH. Don't fixate on the narrow phrasing. Move into adjacent
-      areas that may be useful: neighboring disciplines and industries that faced
-      a similar problem, historical analogues, opposing viewpoints and criticism,
-      non-obvious connections between topics. Regularly ask yourself: "What sits
-      right next to the scope and might turn out to be important?" Capture
-      valuable unexpected findings.
-
-      ═══════════════════════════════════════════════
-      EVALUATING SOURCES AND FACTS
-      ═══════════════════════════════════════════════
-      CRITICAL APPRAISAL. Watch for signs of problematic sources: aggregators
-      instead of the original, false authority, nameless sources paired with
-      passive voice, general qualifiers without specifics, unconfirmed reports,
-      marketing language, speculation, cherry-picked data. Do not present such
-      results as established fact — flag the issue. Present speculation about the
-      future as speculation, not as something that has happened.
-
-      LATERAL READING. To judge an unfamiliar source, don't burrow into the
-      source itself — see what other reliable sources say about it and its author.
-
-      TRIANGULATION. Confirm key facts — numbers, dates, important claims — with
-      several independent sources. On conflict, prioritize by recency,
-      consistency with other facts, and source quality. Surface unresolved
-      contradictions explicitly in the report.
-
-      SELF-VERIFICATION. Before finalizing, formulate verification questions about
-      your key claims and answer them separately, grounded in what you found.
-
-      ═══════════════════════════════════════════════
-      REPORT FORMAT (in the document, written in ENGLISH)
-      ═══════════════════════════════════════════════
-      - A direct answer to the main question up front.
-      - A detailed breakdown by subsections.
-      - A separate "Смежное и неочевидное" section — useful things found next to
-        the scope.
-      - Contradictions and disputed points — separately.
-      - What remains unverified or unknown — honestly.
-      - Sources with a reliability note.
-
-      Be honest about gaps. If you couldn't find something, say so — don't
-      disguise a guess as a fact.
-    autoStart: false
-    launchMessage: null

agent-roles-catalog/bundles/research/ru.yaml

@@ -1,129 +0,0 @@
-schemaVersion: 1
-language: ru
-roles:
-  - slug: researcher
-    emoji: 🧑🏻‍🏫
-    name: Исследователь
-    description: Запускает глубокое исследование
-    instructions: |-
-      You are a thorough research agent. Your job is to conduct deep, exhaustive
-      research on the user's query and produce the result as a document. You work
-      for a long time and never settle for shallow answers. Never fabricate facts
-      or attribute to a source anything it does not contain.
-
-      IMPORTANT: The final report must be written in RUSSIAN, regardless of the
-      language of the sources you read. Conduct your searches and reasoning in
-      whatever language is most effective, but deliver the report in Russian.
-
-      ═══════════════════════════════════════════════
-      STEP 0. PLAN (always do this first)
-      ═══════════════════════════════════════════════
-      Before searching for anything, draft and show a research plan:
-      - Break down the query: what exactly is needed, what sub-questions are
-        inside it, which terms are ambiguous or have synonyms/jargon.
-      - Formulate 5–10 search directions, including adjacent perspectives that
-        may prove useful even if the user did not ask about them directly.
-      - Set a "research budget" — roughly how many searches the task's complexity
-        warrants (a simple fact: under 5; a medium task: 5–15; a hard task: more).
-      - Decide which languages it makes sense to search in (see below).
-
-      ═══════════════════════════════════════════════
-      WHERE TO WRITE THE RESULT
-      ═══════════════════════════════════════════════
-      - If the user explicitly asks to work in the current/already-open document,
-        work in it.
-      - If this is not specified, create a NEW document for the report.
-      - Keep a working draft in the document or in notes: fact → source →
-        reliability assessment. Update the structure as you go.
-
-      ═══════════════════════════════════════════════
-      WORK LOOP (repeat until saturation)
-      ═══════════════════════════════════════════════
-      Work iteratively through an observe → orient → decide → act loop:
-      1. Observe: what has been gathered, what is still missing, what tools exist.
-      2. Orient: which query or source would best close the gap; update your
-         understanding of the topic based on what you've found.
-      3. Decide: choose a specific next action.
-      4. Act: run the search or open the source.
-      After EVERY result, reason about it: what you learned, what new questions
-      arose, what to search next. Maintain an internal list of open questions and
-      gaps, and close them.
-
-      ═══════════════════════════════════════════════
-      HOW TO SEARCH
-      ═══════════════════════════════════════════════
-      VOLUME. Execute a MINIMUM of 15 distinct searches, more for complex tasks.
-      Do not stop at the first plausible answer. Stop only when further searches
-      stop yielding new relevant information (saturation / diminishing returns) —
-      not when it "seems like enough" or when you get tired.
-
-      WIDE → NARROW. Start with short, broad queries (2–5 words), survey the
-      landscape, then narrow. If results are scarce, broaden the phrasing; if
-      they're abundant, narrow it.
-
-      REFORMULATE. Don't repeat the same query. Approach from different angles:
-      synonyms, the professional jargon of the target field, alternative terms,
-      historical names.
-
-      OTHER LANGUAGES. Actively search in the languages where the primary source
-      or the core expertise on the topic is likely to live (e.g. a German-law
-      topic in German, a Japanese-technology topic in Japanese, medical reviews
-      in non-English databases). For many topics a significant share of relevant
-      primary sources is absent from Russian- and English-language results.
-      Translate key terms into the target language and search with them. Render
-      anything found in other languages into Russian in the report.
-
-      NOT THE FIRST PAGE. The first results are the most obvious and often the
-      most superficial. Deliberately dig out what lies deeper.
-
-      FULL PAGES, NOT SNIPPETS. Open and read sources in full rather than relying
-      on search-result fragments.
-
-      PRIMARY SOURCES. Go to the originals: studies, documents, data, specs,
-      reports, repositories, interviews. Prefer primary sources over news
-      aggregators and retellings. If someone cites a source — find the source
-      itself.
-
-      LATERAL SEARCH. Don't fixate on the narrow phrasing. Move into adjacent
-      areas that may be useful: neighboring disciplines and industries that faced
-      a similar problem, historical analogues, opposing viewpoints and criticism,
-      non-obvious connections between topics. Regularly ask yourself: "What sits
-      right next to the scope and might turn out to be important?" Capture
-      valuable unexpected findings.
-
-      ═══════════════════════════════════════════════
-      EVALUATING SOURCES AND FACTS
-      ═══════════════════════════════════════════════
-      CRITICAL APPRAISAL. Watch for signs of problematic sources: aggregators
-      instead of the original, false authority, nameless sources paired with
-      passive voice, general qualifiers without specifics, unconfirmed reports,
-      marketing language, speculation, cherry-picked data. Do not present such
-      results as established fact — flag the issue. Present speculation about the
-      future as speculation, not as something that has happened.
-
-      LATERAL READING. To judge an unfamiliar source, don't burrow into the
-      source itself — see what other reliable sources say about it and its author.
-
-      TRIANGULATION. Confirm key facts — numbers, dates, important claims — with
-      several independent sources. On conflict, prioritize by recency,
-      consistency with other facts, and source quality. Surface unresolved
-      contradictions explicitly in the report.
-
-      SELF-VERIFICATION. Before finalizing, formulate verification questions about
-      your key claims and answer them separately, grounded in what you found.
-
-      ═══════════════════════════════════════════════
-      REPORT FORMAT (in the document, written in RUSSIAN)
-      ═══════════════════════════════════════════════
-      - A direct answer to the main question up front.
-      - A detailed breakdown by subsections.
-      - A separate "Смежное и неочевидное" section — useful things found next to
-        the scope.
-      - Contradictions and disputed points — separately.
-      - What remains unverified or unknown — honestly.
-      - Sources with a reliability note.
-
-      Be honest about gaps. If you couldn't find something, say so — don't
-      disguise a guess as a fact.
-    autoStart: false
-    launchMessage: null

agent-roles-catalog/index.yaml

@@ -21,16 +21,18 @@ bundles:
         version: 8
       - slug: narrator
         version: 2
-  - id: research
+  - id: assistants
     name:
-      ru: Исследование
-      en: Research
+      ru: Ассистенты
+      en: Assistants
     description:
-      ru: Глубокое исследование темы с подготовкой отчёта.
-      en: Deep research on a topic with a prepared report.
+      ru: Ассистенты общего назначения
+      en: General-purpose assistants
     languages:
       - ru
       - en
     roles:
       - slug: researcher
+        version: 9
+      - slug: call-summarizer
         version: 1

agent-roles-catalog/scripts/content-hashes.json

@@ -1,4 +1,8 @@
 {
+  "call-summarizer": {
+    "version": 1,
+    "hash": "edba0c5ac5e27460f73efd361ee4e7cb743a085ae141f3b649e9d306e5929553"
+  },
   "fact-checker": {
     "version": 6,
     "hash": "6bb22a9e5a5079b5cb287b5b26addbd36b9afeb7c9508287dcad9343fc53d685"
@@ -16,8 +20,8 @@
     "hash": "cef39fed321779631ddd1077fcba53399adf0e48b301df281c71eb042610900d"
   },
   "researcher": {
-    "version": 1,
-    "hash": "853658fda43ddbe0a4d08f2c6e50b5116d29a2e9ccd7f46e173e65920d8f6ace"
+    "version": 9,
+    "hash": "880047f6a8612d420c77c03d9cc6308a25b2cd6f84647da9df9bae0e22bd5e4d"
   },
   "structural-editor": {
     "version": 4,

apps/client/package.json

@@ -13,6 +13,7 @@
   },
   "dependencies": {
     "@ai-sdk/react": "^3.0.208",
+    "@braintree/sanitize-url": "7.1.2",
     "@atlaskit/pragmatic-drag-and-drop": "1.8.1",
     "@atlaskit/pragmatic-drag-and-drop-auto-scroll": "2.1.5",
     "@atlaskit/pragmatic-drag-and-drop-flourish": "2.0.15",
@@ -20,6 +21,7 @@
     "@atlaskit/pragmatic-drag-and-drop-live-region": "1.3.4",
     "@casl/react": "5.0.1",
     "@docmost/editor-ext": "workspace:*",
+    "@docmost/prosemirror-markdown": "workspace:*",
     "@excalidraw/excalidraw": "0.18.0-3a5ef40",
     "@mantine/core": "8.3.18",
     "@mantine/dates": "8.3.18",
@@ -61,6 +63,7 @@
     "react-clear-modal": "^2.0.18",
     "react-dom": "^18.3.1",
     "react-drawio": "1.0.7",
+    "web-vitals": "^5.1.0",
     "react-error-boundary": "6.1.1",
     "react-helmet-async": "3.0.0",
     "react-i18next": "16.5.8",
@@ -97,6 +100,7 @@
     "typescript": "5.9.3",
     "typescript-eslint": "8.57.1",
     "vite": "8.0.5",
+    "vite-plugin-compression2": "2.5.3",
     "vitest": "4.1.6"
   }
 }

apps/client/public/locales/en-US/translation.json

@@ -1373,6 +1373,39 @@
   "The role catalog is unavailable": "The role catalog is unavailable",
   "Please try again later.": "Please try again later.",
   "No bundles available": "No bundles available",
+  "Content": "Content",
+  "Content language of the roles": "Content language of the roles",
+  "{{count}} updates available in {{bundles}} bundles": "{{count}} updates available in {{bundles}} bundles",
+  "Update all ({{count}})": "Update all ({{count}})",
+  "Updating {{current}}/{{total}}…": "Updating {{current}}/{{total}}…",
+  "{{count}} roles are installed in another language. A different language installs separately and appears as new.": "{{count}} roles are installed in another language. A different language installs separately and appears as new.",
+  "{{count}} roles": "{{count}} roles",
+  "{{count}} new — none installed": "{{count}} new — none installed",
+  "All installed · up to date": "All installed · up to date",
+  "{{count}} updates · {{installed}} up to date": "{{count}} updates · {{installed}} up to date",
+  "{{count}} new": "{{count}} new",
+  "{{count}} installed": "{{count}} installed",
+  "{{count}} updates": "{{count}} updates",
+  "Install bundle": "Install bundle",
+  "Install {{count}} selected": "Install {{count}} selected",
+  "Install bundle ({{count}})": "Install bundle ({{count}})",
+  "{{selected}} of {{total}} selected": "{{selected}} of {{total}} selected",
+  "Select all": "Select all",
+  "Deselect all": "Deselect all",
+  "Skipped": "Skipped",
+  "v{{version}}": "v{{version}}",
+  "{{count}} roles installed": "{{count}} roles installed",
+  "{{count}} roles installed · {{renamed}} renamed": "{{count}} roles installed · {{renamed}} renamed",
+  "{{count}} roles updated": "{{count}} roles updated",
+  "Installed {{installed}} · {{skipped}} skipped": "Installed {{installed}} · {{skipped}} skipped",
+  "A role named \"{{name}}\" already exists in this workspace.": "A role named \"{{name}}\" already exists in this workspace.",
+  "\"{{name}}\" is already installed.": "\"{{name}}\" is already installed.",
+  "Rename & install": "Rename & install",
+  "Couldn’t load the catalog": "Couldn’t load the catalog",
+  "Check your connection and try again. Installed roles are not affected.": "Check your connection and try again. Installed roles are not affected.",
+  "Retry": "Retry",
+  "The catalog is empty": "The catalog is empty",
+  "No role bundles are published for this language yet. Try switching the content language.": "No role bundles are published for this language yet. Try switching the content language.",
   "Already up to date": "Already up to date",
   "Updated to the latest version": "Updated to the latest version",
   "This role is no longer in the catalog": "This role is no longer in the catalog",

apps/client/public/locales/ru-RU/translation.json

@@ -1235,6 +1235,39 @@
   "The role catalog is unavailable": "Каталог ролей недоступен",
   "Please try again later.": "Попробуйте позже.",
   "No bundles available": "Наборы недоступны",
+  "Content": "Язык контента",
+  "Content language of the roles": "Язык контента ролей",
+  "{{count}} updates available in {{bundles}} bundles": "Доступно обновлений: {{count}} в наборах: {{bundles}}",
+  "Update all ({{count}})": "Обновить все ({{count}})",
+  "Updating {{current}}/{{total}}…": "Обновление {{current}}/{{total}}…",
+  "{{count}} roles are installed in another language. A different language installs separately and appears as new.": "Ролей установлено на другом языке: {{count}}. Другой язык устанавливается отдельно и отображается как новый.",
+  "{{count}} roles": "ролей: {{count}}",
+  "{{count}} new — none installed": "новых: {{count}} — ничего не установлено",
+  "All installed · up to date": "Все установлены · актуальны",
+  "{{count}} updates · {{installed}} up to date": "обновлений: {{count}} · актуальны: {{installed}}",
+  "{{count}} new": "новых: {{count}}",
+  "{{count}} installed": "установлено: {{count}}",
+  "{{count}} updates": "обновлений: {{count}}",
+  "Install bundle": "Установить набор",
+  "Install {{count}} selected": "Установить выбранные ({{count}})",
+  "Install bundle ({{count}})": "Установить набор ({{count}})",
+  "{{selected}} of {{total}} selected": "выбрано {{selected}} из {{total}}",
+  "Select all": "Выбрать все",
+  "Deselect all": "Снять выбор",
+  "Skipped": "Пропущено",
+  "v{{version}}": "v{{version}}",
+  "{{count}} roles installed": "Установлено ролей: {{count}}",
+  "{{count}} roles installed · {{renamed}} renamed": "Установлено ролей: {{count}} · переименовано: {{renamed}}",
+  "{{count}} roles updated": "Обновлено ролей: {{count}}",
+  "Installed {{installed}} · {{skipped}} skipped": "Установлено: {{installed}} · пропущено: {{skipped}}",
+  "A role named \"{{name}}\" already exists in this workspace.": "Роль с именем «{{name}}» уже существует в этом рабочем пространстве.",
+  "\"{{name}}\" is already installed.": "«{{name}}» уже установлена.",
+  "Rename & install": "Переименовать и установить",
+  "Couldn’t load the catalog": "Не удалось загрузить каталог",
+  "Check your connection and try again. Installed roles are not affected.": "Проверьте подключение и попробуйте снова. Установленные роли не затронуты.",
+  "Retry": "Повторить",
+  "The catalog is empty": "Каталог пуст",
+  "No role bundles are published for this language yet. Try switching the content language.": "Для этого языка ещё не опубликовано ни одного набора ролей. Попробуйте сменить язык контента.",
   "No roles configured": "Роли не настроены",
   "Already up to date": "Уже актуальна",
   "Updated to the latest version": "Обновлено до последней версии",

apps/client/src/App.tsx

@@ -1,38 +1,72 @@
+import { lazy, Suspense } from "react";
 import { Navigate, Route, Routes } from "react-router-dom";
+import { Center, Loader } from "@mantine/core";
+import { Error404 } from "@/components/ui/error-404.tsx";
+import Layout from "@/components/layouts/global/layout.tsx";
+import { useTrackOrigin } from "@/hooks/use-track-origin";
+
+// ShareLayout is route-split: its ShareShell chrome pulls in the table of
+// contents (and thus TipTap), so keeping it out of the eager graph removes the
+// editor engine from startup for authenticated users too.
+const ShareLayout = lazy(
+  () => import("@/features/share/components/share-layout.tsx"),
+);
+
+// Auth / entry pages stay eager: they are the first paint for an unauthenticated
+// visitor (e.g. /login) and are already small, so code-splitting them would only
+// add a cold-chunk round trip to the most common cold-start path.
 import SetupWorkspace from "@/pages/auth/setup-workspace.tsx";
 import LoginPage from "@/pages/auth/login";
-import Home from "@/pages/dashboard/home";
-import Page from "@/pages/page/page";
-import AccountSettings from "@/pages/settings/account/account-settings";
-import WorkspaceMembers from "@/pages/settings/workspace/workspace-members";
-import WorkspaceSettings from "@/pages/settings/workspace/workspace-settings";
-import AiSettings from "@/pages/settings/workspace/ai-settings";
-import Groups from "@/pages/settings/group/groups";
-import GroupInfo from "./pages/settings/group/group-info";
-import Spaces from "@/pages/settings/space/spaces.tsx";
-import { Error404 } from "@/components/ui/error-404.tsx";
-import AccountPreferences from "@/pages/settings/account/account-preferences.tsx";
-import SpaceHome from "@/pages/space/space-home.tsx";
-import PageRedirect from "@/pages/page/page-redirect.tsx";
-import Layout from "@/components/layouts/global/layout.tsx";
 import InviteSignup from "@/pages/auth/invite-signup.tsx";
 import ForgotPassword from "@/pages/auth/forgot-password.tsx";
 import PasswordReset from "./pages/auth/password-reset";
-import SharedPage from "@/pages/share/shared-page.tsx";
-import Shares from "@/pages/settings/shares/shares.tsx";
-import ShareLayout from "@/features/share/components/share-layout.tsx";
+import PageRedirect from "@/pages/page/page-redirect.tsx";
 import ShareRedirect from "@/pages/share/share-redirect.tsx";
-import { useTrackOrigin } from "@/hooks/use-track-origin";
-import SpacesPage from "@/pages/spaces/spaces.tsx";
-import SpaceTrash from "@/pages/space/space-trash.tsx";
-import FavoritesPage from "@/pages/favorites/favorites-page";
-import LabelPage from "@/pages/label/label-page";
+
+// Heavy / leaf pages are route-split with React.lazy so their code (most
+// importantly the whole TipTap editor + KaTeX + lowlight grammars + drawio that
+// the page editor and the readonly share editor pull in) is fetched only when
+// the matching route is actually visited. The <Suspense> boundaries live inside
+// each Layout (around its <Outlet/>), so the app shell stays mounted while a
+// route chunk loads.
+const Home = lazy(() => import("@/pages/dashboard/home"));
+const Page = lazy(() => import("@/pages/page/page"));
+const SpaceHome = lazy(() => import("@/pages/space/space-home.tsx"));
+const SpaceTrash = lazy(() => import("@/pages/space/space-trash.tsx"));
+const SpacesPage = lazy(() => import("@/pages/spaces/spaces.tsx"));
+const FavoritesPage = lazy(() => import("@/pages/favorites/favorites-page"));
+const LabelPage = lazy(() => import("@/pages/label/label-page"));
+const SharedPage = lazy(() => import("@/pages/share/shared-page.tsx"));
+
+const AccountSettings = lazy(
+  () => import("@/pages/settings/account/account-settings"),
+);
+const AccountPreferences = lazy(
+  () => import("@/pages/settings/account/account-preferences.tsx"),
+);
+const WorkspaceSettings = lazy(
+  () => import("@/pages/settings/workspace/workspace-settings"),
+);
+const AiSettings = lazy(() => import("@/pages/settings/workspace/ai-settings"));
+const WorkspaceMembers = lazy(
+  () => import("@/pages/settings/workspace/workspace-members"),
+);
+const Groups = lazy(() => import("@/pages/settings/group/groups"));
+const GroupInfo = lazy(() => import("./pages/settings/group/group-info"));
+const Spaces = lazy(() => import("@/pages/settings/space/spaces.tsx"));
+const Shares = lazy(() => import("@/pages/settings/shares/shares.tsx"));
 
 export default function App() {
   useTrackOrigin();
 
   return (
-    <>
+    <Suspense
+      fallback={
+        <Center h="100vh">
+          <Loader size="sm" />
+        </Center>
+      }
+    >
       <Routes>
         <Route index element={<Navigate to="/home" />} />
         <Route path={"/login"} element={<LoginPage />} />
@@ -83,6 +117,6 @@ export default function App() {
 
         <Route path="*" element={<Error404 />} />
       </Routes>
-    </>
+    </Suspense>
   );
 }

apps/client/src/components/chunk-load-error-boundary.test.ts

@@ -0,0 +1,37 @@
+import { describe, it, expect } from "vitest";
+import { isChunkLoadError } from "./chunk-load-error-boundary";
+
+// The detector decides whether a caught render error is a stale-deploy chunk-404
+// (→ auto-reload to fetch the new manifest) vs a genuine app error (→ generic
+// recovery UI, no reload). A false negative on a real chunk failure re-blanks the
+// app; a false positive would auto-reload on an ordinary error. Pin both sides.
+describe("isChunkLoadError", () => {
+  it("detects the ChunkLoadError name", () => {
+    expect(isChunkLoadError({ name: "ChunkLoadError", message: "x" })).toBe(true);
+  });
+
+  it.each([
+    "Failed to fetch dynamically imported module: https://x/assets/index-abc.js",
+    "error loading dynamically imported module",
+    "Importing a module script failed.",
+  ])("detects the dynamic-import failure message %#", (message) => {
+    expect(isChunkLoadError({ name: "TypeError", message })).toBe(true);
+  });
+
+  it("is case-insensitive on the message", () => {
+    expect(
+      isChunkLoadError({ message: "FAILED TO FETCH DYNAMICALLY IMPORTED MODULE" }),
+    ).toBe(true);
+  });
+
+  it.each([
+    null,
+    undefined,
+    {},
+    { name: "TypeError", message: "Cannot read properties of undefined" },
+    { message: "Network request failed" },
+    new Error("some ordinary render error"),
+  ])("returns false for a non-chunk error %#", (err) => {
+    expect(isChunkLoadError(err)).toBe(false);
+  });
+});

apps/client/src/components/chunk-load-error-boundary.tsx

@@ -0,0 +1,71 @@
+import { ReactNode } from "react";
+import { ErrorBoundary } from "react-error-boundary";
+import { Button, Center, Stack, Text } from "@mantine/core";
+
+const RELOAD_FLAG = "chunk-reload-attempted";
+
+// Heuristic detection of a failed dynamic import. Since the code-splitting work,
+// every route (plus Aside / AiChatWindow) is React.lazy: when a new deploy
+// replaces the hashed chunks, a tab left open on the old index.html requests a
+// chunk URL that now 404s, and React.lazy rejects. Browsers / Vite surface these
+// with a ChunkLoadError name or one of these messages.
+export function isChunkLoadError(error: unknown): boolean {
+  if (!error) return false;
+  const name = (error as { name?: string }).name ?? "";
+  const message = (error as { message?: string }).message ?? "";
+  return (
+    name === "ChunkLoadError" ||
+    /Failed to fetch dynamically imported module/i.test(message) ||
+    /error loading dynamically imported module/i.test(message) ||
+    /Importing a module script failed/i.test(message)
+  );
+}
+
+function handleError(error: unknown) {
+  if (!isChunkLoadError(error)) return;
+  // A stale-chunk 404 is cured by a full reload that re-fetches index.html and
+  // the new chunk manifest. Auto-reload once, guarding against a reload loop
+  // (e.g. a genuinely missing chunk) with a one-shot sessionStorage flag. If the
+  // flag is already set we fall through to the manual recovery UI below.
+  try {
+    if (sessionStorage.getItem(RELOAD_FLAG)) return;
+    sessionStorage.setItem(RELOAD_FLAG, "1");
+  } catch {
+    // sessionStorage unavailable (private mode / disabled): skip the automatic
+    // reload rather than risk an unguarded loop; the fallback UI still recovers.
+    return;
+  }
+  window.location.reload();
+}
+
+// Root-level boundary that sits ABOVE every route-level Suspense boundary so a
+// lazy route/component chunk failure is caught here instead of unmounting the
+// whole tree into a blank white screen. Per-feature ErrorBoundaries (page.tsx,
+// transclusion, page-embed) remain in place underneath for their local errors.
+export function ChunkLoadErrorBoundary({ children }: { children: ReactNode }) {
+  return (
+    <ErrorBoundary
+      onError={handleError}
+      fallbackRender={({ error }) => {
+        const chunk = isChunkLoadError(error);
+        return (
+          <Center h="100vh" p="md">
+            <Stack align="center" gap="sm" maw={420}>
+              <Text fw={600}>
+                {chunk ? "A new version is available" : "Something went wrong"}
+              </Text>
+              <Text size="sm" c="dimmed" ta="center">
+                {chunk
+                  ? "Please reload the page to load the latest version."
+                  : "An unexpected error occurred. Reloading the page may help."}
+              </Text>
+              <Button onClick={() => window.location.reload()}>Reload</Button>
+            </Stack>
+          </Center>
+        );
+      }}
+    >
+      {children}
+    </ErrorBoundary>
+  );
+}

apps/client/src/components/layouts/global/global-app-shell.tsx

@@ -1,9 +1,10 @@
 import { AppShell, Container } from "@mantine/core";
-import React, { useEffect, useRef, useState } from "react";
+import React, { Suspense, useEffect, useRef, useState } from "react";
 import { useLocation } from "react-router-dom";
 import { useTranslation } from "react-i18next";
 import SettingsSidebar from "@/components/settings/settings-sidebar.tsx";
-import { useAtom } from "jotai";
+import { useAtom, useAtomValue } from "jotai";
+import { aiChatWindowOpenAtom } from "@/features/ai-chat/atoms/ai-chat-atom.ts";
 import {
   APP_NAVBAR_ID,
   NAVBAR_COLLAPSE_BREAKPOINT,
@@ -14,8 +15,6 @@ import {
 } from "@/components/layouts/global/hooks/atoms/sidebar-atom.ts";
 import { SpaceSidebar } from "@/features/space/components/sidebar/space-sidebar.tsx";
 import { AppHeader } from "@/components/layouts/global/app-header.tsx";
-import Aside from "@/components/layouts/global/aside.tsx";
-import AiChatWindow from "@/features/ai-chat/components/ai-chat-window.tsx";
 import GitmostGlobalBridge from "@/features/editor/gitmost/gitmost-global-bridge.tsx";
 import classes from "./app-shell.module.css";
 import { useToggleSidebar } from "@/components/layouts/global/hooks/hooks/use-toggle-sidebar.ts";
@@ -23,6 +22,21 @@ import GlobalSidebar from "@/components/layouts/global/global-sidebar.tsx";
 import { ASIDE_PANEL_ID } from "@/hooks/use-toggle-aside.tsx";
 import { MAIN_CONTENT_ID, SkipToMain } from "@/components/ui/skip-to-main.tsx";
 
+// Lazily load the AI chat window so the AI SDK runtime it pulls in is fetched
+// only after the user first opens the chat, instead of for every authenticated
+// user on load. The window itself renders null while closed, so there is no
+// behavior difference — it simply is not mounted until first opened.
+const AiChatWindow = React.lazy(
+  () => import("@/features/ai-chat/components/ai-chat-window.tsx"),
+);
+
+// The right aside hosts the comment panel and table of contents, both of which
+// pull in TipTap. It only ever renders on page routes, so lazy-loading it keeps
+// the whole editor engine out of the eager global-shell startup graph.
+const Aside = React.lazy(
+  () => import("@/components/layouts/global/aside.tsx"),
+);
+
 export default function GlobalAppShell({
   children,
 }: {
@@ -37,6 +51,15 @@ export default function GlobalAppShell({
   const [isResizing, setIsResizing] = useState(false);
   const sidebarRef = useRef(null);
 
+  // Latch: once the AI chat window has been opened, keep it mounted so an
+  // in-flight stream is never torn down. Before the first open the AI chat chunk
+  // is never fetched.
+  const aiChatOpen = useAtomValue(aiChatWindowOpenAtom);
+  const [aiChatEverOpened, setAiChatEverOpened] = useState(false);
+  useEffect(() => {
+    if (aiChatOpen) setAiChatEverOpened(true);
+  }, [aiChatOpen]);
+
   const startResizing = React.useCallback((mouseDownEvent) => {
     mouseDownEvent.preventDefault();
     setIsResizing(true);
@@ -67,14 +90,20 @@ export default function GlobalAppShell({
   );
 
   useEffect(() => {
-    //https://codesandbox.io/p/sandbox/kz9de
+    // Attach the global mousemove/mouseup only WHILE resizing (started on the
+    // handle's mousedown via startResizing → isResizing=true) and detach on
+    // mouseup (stopResizing → isResizing=false). Previously these listeners were
+    // attached for the whole app lifetime, so every mouse move over the app ran
+    // the resize handler.
+    // https://codesandbox.io/p/sandbox/kz9de
+    if (!isResizing) return;
     window.addEventListener("mousemove", resize);
     window.addEventListener("mouseup", stopResizing);
     return () => {
       window.removeEventListener("mousemove", resize);
       window.removeEventListener("mouseup", stopResizing);
     };
-  }, [resize, stopResizing]);
+  }, [isResizing, resize, stopResizing]);
 
   const location = useLocation();
   const isSettingsRoute = location.pathname.startsWith("/settings");
@@ -160,13 +189,21 @@ export default function GlobalAppShell({
                   : undefined
           }
         >
-          <Aside />
+          <Suspense fallback={null}>
+            <Aside />
+          </Suspense>
         </AppShell.Aside>
       )}
     </AppShell>
-    {/* Floating AI chat window. Mounted once globally; it is position: fixed
-        and self-hides when closed, so its place in the tree is not critical. */}
-    <AiChatWindow />
+    {/* Floating AI chat window. Mounted once globally on first open; it is
+        position: fixed and self-hides when closed, so its place in the tree is
+        not critical. Kept mounted after the first open so a live stream is not
+        aborted. */}
+    {aiChatEverOpened && (
+      <Suspense fallback={null}>
+        <AiChatWindow />
+      </Suspense>
+    )}
       {/* Global gitmost native bridge: registers listSpaces / listPages /
           createPageWithRecording on window.gitmost so the native host can
           create a page with a recording even when no page editor is open. */}

apps/client/src/components/layouts/global/layout.tsx

@@ -1,5 +1,7 @@
+import { Suspense, useEffect } from "react";
 import { UserProvider } from "@/features/user/user-provider.tsx";
 import { Outlet, useParams } from "react-router-dom";
+import { Center, Loader } from "@mantine/core";
 import GlobalAppShell from "@/components/layouts/global/global-app-shell.tsx";
 import { SearchSpotlight } from "@/features/search/components/search-spotlight.tsx";
 import { useGetSpaceBySlugQuery } from "@/features/space/queries/space-query.ts";
@@ -8,10 +10,39 @@ export default function Layout() {
   const { spaceSlug } = useParams();
   const { data: space } = useGetSpaceBySlugQuery(spaceSlug);
 
+  // Warm the (now route-split) editor chunk during idle time on authenticated
+  // routes, so the first navigation to a page renders from cache instead of a
+  // cold chunk fetch. Best-effort: gated on requestIdleCallback and never blocks
+  // startup — the dynamic import mirrors the App.tsx route lazy loader so both
+  // resolve to the same chunk.
+  useEffect(() => {
+    const ric =
+      typeof window !== "undefined" && (window as any).requestIdleCallback;
+    const warm = () => {
+      // Best-effort prefetch: a failed warm-up (offline, stale 404) is harmless
+      // and must not surface as an unhandledrejection.
+      void import("@/pages/page/page").catch(() => {});
+    };
+    if (ric) {
+      const id = ric(warm);
+      return () => (window as any).cancelIdleCallback?.(id);
+    }
+    const timer = setTimeout(warm, 2000);
+    return () => clearTimeout(timer);
+  }, []);
+
   return (
     <UserProvider>
       <GlobalAppShell>
-        <Outlet />
+        <Suspense
+          fallback={
+            <Center h="60vh">
+              <Loader size="sm" />
+            </Center>
+          }
+        >
+          <Outlet />
+        </Suspense>
       </GlobalAppShell>
       <SearchSpotlight spaceId={space?.id} />
     </UserProvider>

apps/client/src/components/ui/emoji-picker.tsx

@@ -5,7 +5,7 @@ import {
   Button,
   useMantineColorScheme,
 } from "@mantine/core";
-import { useClickOutside, useDisclosure, useWindowEvent } from "@mantine/hooks";
+import { useClickOutside, useDisclosure } from "@mantine/hooks";
 import { Suspense } from "react";
 import { useTranslation } from "react-i18next";
 
@@ -57,14 +57,22 @@ function EmojiPicker({
     [dropdown, target],
   );
 
-  // We need this because the default Mantine popover closeOnEscape does not work
-  useWindowEvent("keydown", (event) => {
-    if (opened && event.key === "Escape") {
-      event.stopPropagation();
-      event.preventDefault();
-      handlers.close();
-    }
-  });
+  // We need this because the default Mantine popover closeOnEscape does not work.
+  // Attach the global keydown ONLY while the picker is open (every tree row
+  // renders an EmojiPicker, so an always-on window listener meant ~20-30 idle
+  // keydown handlers firing on each keystroke).
+  useEffect(() => {
+    if (!opened) return;
+    const handleKeydown = (event: KeyboardEvent) => {
+      if (event.key === "Escape") {
+        event.stopPropagation();
+        event.preventDefault();
+        handlers.close();
+      }
+    };
+    window.addEventListener("keydown", handleKeydown);
+    return () => window.removeEventListener("keydown", handleKeydown);
+  }, [opened, handlers]);
 
   // emoji-mart's built-in autoFocus calls .focus() without preventScroll, which
   // makes the browser scroll every scrollable ancestor of the search input to

apps/client/src/features/ai-chat/components/ai-chat-window.tsx

@@ -19,7 +19,7 @@ import {
   IconPlus,
   IconX,
 } from "@tabler/icons-react";
-import { useAtom, useSetAtom } from "jotai";
+import { useAtom, useAtomValue, useSetAtom } from "jotai";
 import { useLocation, useMatch } from "react-router-dom";
 import { useTranslation } from "react-i18next";
 import { useQueryClient } from "@tanstack/react-query";
@@ -36,7 +36,15 @@ import {
   desktopSidebarAtom,
   mobileSidebarAtom,
 } from "@/components/layouts/global/hooks/atoms/sidebar-atom.ts";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
+import {
+  pageEditorAtom,
+  readOnlyEditorAtom,
+} from "@/features/editor/atoms/editor-atoms.ts";
+import {
+  getEditorSelectionContext,
+  type EditorSelectionContext,
+} from "@/features/editor/utils/get-editor-selection.ts";
 import { extractPageSlugId } from "@/lib";
 import {
   AI_CHATS_RQ_KEY,
@@ -45,9 +53,13 @@ import {
   useAiChatsQuery,
   useAiRolesQuery,
 } from "@/features/ai-chat/queries/ai-chat-query.ts";
+import { workspaceAtom } from "@/features/user/atoms/current-user-atom";
 import ConversationList from "@/features/ai-chat/components/conversation-list.tsx";
 import ChatThread from "@/features/ai-chat/components/chat-thread.tsx";
-import { exportAiChat } from "@/features/ai-chat/services/ai-chat-service.ts";
+import {
+  exportAiChat,
+  stopRun,
+} from "@/features/ai-chat/services/ai-chat-service.ts";
 import { useChatSession } from "@/features/ai-chat/hooks/use-chat-session.ts";
 import {
   shouldCollapseOnOutsidePointer,
@@ -74,6 +86,20 @@ const MIN_HEIGHT = 400;
 // Margin kept between the window and the viewport edges while dragging.
 const EDGE_MARGIN = 8;
 
+// #184 phase 1.5 / #430: backstop for the degraded-poll fallback. The poll is
+// armed when a resume attempt could not attach to the live run and disarmed by the
+// thread on settle / local stream; this cap is the ONLY backstop against an endless
+// tick (a stuck 'streaming' row before the boot-sweep, or a user-tail 204 with no
+// run).
+//
+// #430: measured from RUN ACTIVITY, not from arm-time. A real autonomous run takes
+// 11-25 min — longer than a fixed 10-min-from-start cap, which used to cut the poll
+// off mid-run. Instead we cap on INACTIVITY: keep polling as long as the run is
+// still making progress (its persisted rows keep changing), and only give up after
+// this long with NO new activity. A genuinely stuck run produces no row changes, so
+// the idle cap still bounds it; a long-but-progressing run polls to completion.
+const DEGRADED_POLL_IDLE_MAX_MS = 10 * 60_000;
+
 /** Compact token formatter: 1.2M / 3.4k / 950. */
 function formatTokens(n: number): string {
   if (n >= 1_000_000) return `${(n / 1_000_000).toFixed(1)}M`;
@@ -219,7 +245,9 @@ export default function AiChatWindow() {
   // left partly off-screen).
   const [geom, setGeom] = useAtom(aiChatWindowGeomAtom);
 
-  const { data: chats } = useAiChatsQuery();
+  // Gated on windowOpen: the chat list is only needed once the window is open,
+  // so a closed window issues no chat-list request/refetch on navigation.
+  const { data: chats } = useAiChatsQuery(windowOpen);
   // Roles for the new-chat picker (any member may list them). Only fetched while
   // the window is open.
   const { data: roles } = useAiRolesQuery(windowOpen);
@@ -231,8 +259,78 @@ export default function AiChatWindow() {
     [roles],
   );
 
+  // #184 phase 1.5: degraded-poll fallback (replaces the F4/F5/F7 latches). When
+  // ChatThread could not attach to a still-running run it arms this via
+  // onResumeFallback(true); the thread disarms it on settle / local stream. The
+  // window only OWNS the timer (armedAtRef stamps when it was armed for the cap).
+  const [degradedPoll, setDegradedPoll] = useState(false);
+  // #430: timestamp of the LAST run activity while the poll is armed — stamped on
+  // arm and re-stamped whenever the polled rows change (see the effect below). The
+  // idle cap is measured from this, so a long-but-progressing run keeps polling.
+  const lastActivityAtRef = useRef(0);
+  const onResumeFallback = useCallback((active: boolean): void => {
+    if (active) lastActivityAtRef.current = Date.now();
+    setDegradedPoll(active);
+  }, []);
+  // Reset the degraded poll whenever the open chat changes: it is scoped to the
+  // resume attempt of the previously-open chat (invariant 8).
+  useEffect(() => {
+    setDegradedPoll(false);
+  }, [activeChatId]);
+
   const { data: messageRows, isLoading: messagesLoading } =
-    useAiChatMessagesQuery(activeChatId ?? undefined);
+    useAiChatMessagesQuery(
+      activeChatId ?? undefined,
+      // DELIBERATELY DUMB (invariant 8 / task 2.4): poll every 2.5s while armed
+      // and while the run is still active (#430: under the INACTIVITY cap, not a
+      // fixed-from-start cap); otherwise off. NO error checks (TanStack v5 resets
+      // fetchFailureCount each fetch, so consecutive errors are not expressible —
+      // and the poll must survive a server restart) and NO tail checks (the
+      // settled/local-stream semantics live in ChatThread, which disarms via
+      // onResumeFallback(false)). The idle cap is the only backstop.
+      () =>
+        degradedPoll === true &&
+        Date.now() - lastActivityAtRef.current < DEGRADED_POLL_IDLE_MAX_MS
+          ? 2500
+          : false,
+      // #344: gate on windowOpen too — no message history is fetched (and no
+      // degraded poll runs) while the window is closed; it loads when the window
+      // opens with an active chat.
+      windowOpen,
+    );
+
+  // #430: re-stamp the activity clock whenever the polled rows change while the
+  // poll is armed. TanStack keeps the same `messageRows` reference across refetches
+  // that return deep-equal data (structural sharing), so a new reference means the
+  // run genuinely progressed — which extends the inactivity cap above. A stuck run
+  // yields no reference change, so the cap eventually fires and stops the poll.
+  useEffect(() => {
+    if (degradedPoll) lastActivityAtRef.current = Date.now();
+  }, [degradedPoll, messageRows]);
+
+  // #184 reconnect-and-live-follow. Whether detached agent runs are enabled for
+  // this workspace. When the feature is off no runs are ever created, so the
+  // resume attempt would only ever 204; gating ChatThread's resume on it avoids a
+  // pointless attach round-trip.
+  const workspace = useAtomValue(workspaceAtom);
+  const autonomousRunsEnabled =
+    workspace?.settings?.ai?.autonomousRuns === true;
+
+  // Authoritative stop of the open chat's detached run (the Stop button in
+  // autonomous mode). Request the server stop — the ONLY thing that ends a
+  // detached run; a mere local SSE abort is a client disconnect the server
+  // ignores. On failure surface the error.
+  const handleServerStop = useCallback(
+    (chatId: string): void => {
+      void stopRun(chatId).catch(() => {
+        notifications.show({
+          message: t("Failed to stop the run"),
+          color: "red",
+        });
+      });
+    },
+    [t],
+  );
 
   // The page the user is currently viewing. AiChatWindow lives in a pathless
   // parent layout route, so useParams() can't see :pageSlug. Match the full
@@ -244,13 +342,34 @@ export default function AiChatWindow() {
   // reads/writes via its CASL-enforced page tools using the id.
   const pageRouteMatch = useMatch("/s/:spaceSlug/p/:pageSlug");
   const pageSlug = pageRouteMatch?.params?.pageSlug;
-  const { data: openPageData } = usePageQuery({
+  const { data: openPageData } = usePageMetaQuery({
     pageId: extractPageSlugId(pageSlug),
   });
   const openPage = openPageData
     ? { id: openPageData.id, title: openPageData.title }
     : null;
 
+  // Live editor handles for the selection snapshot (#388). Both are published by
+  // the page editor; the read-only editor is used in read mode. Reading the
+  // selection off `editor.state` stays valid after the editor blurs (ProseMirror
+  // keeps state.selection), mirroring the comment button (comment-dialog.tsx).
+  const pageEditor = useAtomValue(pageEditorAtom);
+  const readOnlyEditor = useAtomValue(readOnlyEditorAtom);
+
+  // Snapshot the user's current editor selection at send time. Edit-mode editor
+  // wins; the read-only editor is the fallback (read mode). Null when neither
+  // holds a non-empty selection. Passed to <ChatThread>, which reads it live
+  // from a ref inside prepareSendMessagesRequest — so each turn ships a fresh
+  // snapshot and multi-turn works without recreating the transport.
+  const getEditorSelection = useCallback((): EditorSelectionContext | null => {
+    for (const editor of [pageEditor, readOnlyEditor]) {
+      if (!editor || editor.isDestroyed) continue;
+      const sel = getEditorSelectionContext(editor.state);
+      if (sel) return sel;
+    }
+    return null;
+  }, [pageEditor, readOnlyEditor]);
+
   // The AI-chat thread-identity lifecycle (mount key, both new-chat id adoption
   // paths, the history-loaded latch, the render-phase reconciler) lives in this
   // hook. See adopt-chat-id.ts for the canonical #137 two-tab race explanation.
@@ -873,6 +992,9 @@ export default function AiChatWindow() {
               chatId={activeChatId}
               initialRows={activeChatId ? messageRows : []}
               openPage={openPage}
+              // #388: live snapshotter for the user's editor selection, read at
+              // send time and nested inside openPage on the wire.
+              getEditorSelection={getEditorSelection}
               // Honoured only for a new chat; null = universal assistant.
               roleId={activeChatId === null ? selectedRoleId : null}
               // Role cards are the new-chat empty-state; offered only when this
@@ -882,6 +1004,15 @@ export default function AiChatWindow() {
               assistantName={currentRole?.name}
               onTurnFinished={onTurnFinished}
               onServerChatId={onServerChatId}
+              // #184 phase 1.5: arm/disarm the degraded-poll fallback when a
+              // resume attempt could not attach to the live run; the thread
+              // disarms it on settle / local stream.
+              onResumeFallback={onResumeFallback}
+              // #184: in autonomous mode the Stop button must hit the authoritative
+              // server stop (a local SSE abort is a client disconnect the server
+              // ignores).
+              autonomousRunsEnabled={autonomousRunsEnabled}
+              onServerStop={handleServerStop}
             />
           )}
         </div>

apps/client/src/features/ai-chat/components/ai-chat.module.css

@@ -55,6 +55,15 @@
     padding-inline-start: 1.4em;
 }
 
+/* The canonical converter renders list items through the editor schema, which
+   wraps each item's content in a <p> (listItem content is `paragraph+`). Drop
+   that paragraph's block margin so list items render TIGHT (no extra vertical
+   gap), matching the previous marked output — same rule already applied to
+   table cells above (issue #347). */
+.markdown li p {
+    margin: 0;
+}
+
 /* GFM tables in assistant markdown. The chat lives in a NARROW side panel, so a
    wide LLM table must scroll horizontally instead of collapsing its columns:
    `.markdown` sets `word-break: break-word`, which (with the default table
@@ -172,6 +181,14 @@
     margin: 0 0 4px;
 }
 
+/* Same as `.markdown li p` above: the canonical converter wraps every list
+   item's content in a <p>, so without this each reasoning-panel list item would
+   pick up `.reasoningText p`'s 4px bottom margin and render too loose. Drop it
+   so Reasoning-panel lists stay tight, mirroring the pre-#347 marked output. */
+.reasoningText li p {
+    margin: 0;
+}
+
 .inputWrapper {
     flex: 0 0 auto;
     padding-top: var(--mantine-spacing-xs);

apps/client/src/features/ai-chat/components/chat-thread.tsx

@@ -1,6 +1,17 @@
 import { useCallback, useEffect, useMemo, useRef, useState } from "react";
+import { useQueryClient } from "@tanstack/react-query";
 import { generateId } from "ai";
-import { ActionIcon, Box, Group, Stack, Text, Tooltip } from "@mantine/core";
+import {
+  ActionIcon,
+  Alert,
+  Box,
+  Button,
+  Group,
+  Loader,
+  Stack,
+  Text,
+  Tooltip,
+} from "@mantine/core";
 import {
   IconClockHour4,
   IconPlayerPlayFilled,
@@ -24,6 +35,15 @@ import {
 } from "@/features/ai-chat/utils/role-launch.ts";
 import { describeChatError } from "@/features/ai-chat/utils/error-message.ts";
 import { extractServerChatId } from "@/features/ai-chat/utils/adopt-chat-id.ts";
+import { assistantMessageHasVisibleContent } from "@/features/ai-chat/utils/message-content.ts";
+import {
+  isStreamingTail,
+  isSettledAssistantTail,
+  seedRows,
+  mergeById,
+} from "@/features/ai-chat/utils/resume-helpers.ts";
+import { AI_CHAT_MESSAGES_RQ_KEY } from "@/features/ai-chat/queries/ai-chat-query.ts";
+import type { EditorSelectionContext } from "@/features/editor/utils/get-editor-selection.ts";
 import {
   dequeue,
   enqueueMessage,
@@ -41,6 +61,45 @@ import classes from "@/features/ai-chat/components/ai-chat.module.css";
 // from the token rate.
 const STREAM_THROTTLE_MS = 50;
 
+// #430: auto-reconnect after a LIVE SSE disconnect of a DETACHED (autonomous) run.
+// The run keeps executing server-side, so instead of a dead "Lost connection"
+// banner we re-attach to the live tail through the SAME resumable machinery the
+// mount path uses. Attempts back off exponentially and are capped; on exhaustion
+// the user gets a manual Retry (the degraded poll keeps catching up underneath).
+const RECONNECT_MAX_ATTEMPTS = 5;
+// Backoff before attempt N (1-based): 1s, 2s, 4s, 8s, 16s.
+const RECONNECT_BASE_DELAY_MS = 1000;
+
+// #396: bounded retry for the "Interrupt and send now" re-send when it races the
+// authoritative server stop of the just-superseded detached run. The re-POST can
+// arrive before the old run has released the one-active-run slot, so the server
+// returns 409 A_RUN_ALREADY_ACTIVE. The server stop guarantees the slot frees, so
+// a few short backoffs converge. 4 total attempts: attempt 1 fires immediately,
+// then these are the waits BEFORE attempts 2, 3 and 4 (150ms, 300ms, 600ms). If
+// all 4 attempts 409, the last 409 surfaces (the banner) — acceptable per #396.
+const SUPERSEDE_RETRY_DELAYS_MS = [150, 300, 600];
+// The server error code that means "another run is already active for this chat".
+const A_RUN_ALREADY_ACTIVE = "A_RUN_ALREADY_ACTIVE";
+
+/**
+ * #396: defensively decide whether a 409 response is the one-active-run gate
+ * rejection (code A_RUN_ALREADY_ACTIVE) vs. some other 409. Reads a CLONE so the
+ * original response body stays intact for the caller when it is returned as-is.
+ * Any parse failure or unexpected shape => false (do NOT retry).
+ */
+async function isRunAlreadyActive(response: Response): Promise<boolean> {
+  try {
+    const body = (await response.clone().json()) as unknown;
+    return (
+      typeof body === "object" &&
+      body !== null &&
+      (body as { code?: unknown }).code === A_RUN_ALREADY_ACTIVE
+    );
+  } catch {
+    return false;
+  }
+}
+
 /** The page the user is currently viewing, sent as chat context. */
 export interface OpenPageContext {
   id: string;
@@ -60,6 +119,10 @@ interface ChatThreadProps {
   /** The page currently open in the workspace, or null on a non-page route.
    *  Sent with each turn so the agent knows what "this page" refers to. */
   openPage?: OpenPageContext | null;
+  /** #388: snapshot the user's current editor selection at SEND time. Invoked
+   *  inside prepareSendMessagesRequest and nested into openPage on the wire, so a
+   *  fresh snapshot ships each turn. Null/absent => nothing selected. */
+  getEditorSelection?: () => EditorSelectionContext | null;
   /** The agent role selected for a NEW chat (null = universal assistant). Sent
    *  in the request body so the server persists it on chat creation; ignored by
    *  the server for existing chats (the role is read from the chat row). */
@@ -86,6 +149,23 @@ interface ChatThreadProps {
    *  Copy/export button available mid-stream). Distinct from onTurnFinished,
    *  which fires only at the terminal outcome. */
   onServerChatId?: (serverChatId?: string) => void;
+  /** #184 phase 1.5: arm/disarm the parent's degraded-poll fallback for THIS
+   *  chat's window. Called `true` when a resume attempt could not attach to the
+   *  live run (attach 204 / starved-or-torn resumed finish), so the window starts
+   *  a dumb timed poll of the message history to follow the detached run to settle;
+   *  called `false` the moment a local stream starts or the terminal settled row is
+   *  merged (invariant 8). The window owns the timer + its 10-min cap. */
+  onResumeFallback?: (active: boolean) => void;
+  /** #184: whether detached/autonomous agent runs are enabled for this workspace.
+   *  When true the Stop button must additionally hit the AUTHORITATIVE server stop
+   *  (via onServerStop) — aborting only the local SSE is just a client disconnect,
+   *  which the server deliberately ignores, so the detached run would keep going. */
+  autonomousRunsEnabled?: boolean;
+  /** #184: request the server-side stop of this chat's active run (the parent owns
+   *  the endpoint call + the "stopping" latch that keeps observer-polling from
+   *  immediately re-streaming the stopping run's output). Called with the resolved
+   *  chat id when the user presses Stop in autonomous mode. */
+  onServerStop?: (chatId: string) => void;
 }
 
 /**
@@ -125,17 +205,69 @@ export default function ChatThread({
   threadKey,
   initialRows,
   openPage,
+  getEditorSelection,
   roleId,
   roles,
   onRolePicked,
   assistantName,
   onTurnFinished,
   onServerChatId,
+  onResumeFallback,
+  autonomousRunsEnabled,
+  onServerStop,
 }: ChatThreadProps) {
   const { t } = useTranslation();
+  const queryClient = useQueryClient();
+
+  // resume machinery refs (#184 phase 1.5)
+  const attachAbortRef = useRef<AbortController | null>(null);
+  const reconcileTailRef = useRef(false);
+  const noStreamHandledRef = useRef(false);
+  const onNoActiveStreamRef = useRef<(() => void) | null>(null);
+  // #430: called from the transport's reconnect-GET success branch when a live
+  // stream re-attached (2xx, not 204) — clears the reconnect banner. Kept in a ref
+  // because the transport's fetch closure (useMemo([])) reads it live.
+  const onReconnectAttachedRef = useRef<(() => void) | null>(null);
+  // Live mount flag. The attach GET and the resumed `onFinish` are async and can
+  // land AFTER this thread unmounts (the parent remounts per chat via `key`); with
+  // chatIdRef then pointing at the NEW chat, an ungated late callback would arm a
+  // spurious poll + foreign invalidation on the newly-opened chat. Every parent-
+  // facing resume side-effect is gated on this.
+  const mountedRef = useRef(true);
+  const [resumedTurn, setResumedTurn] = useState(false);
+  const resumedTurnRef = useRef(false);
+  // Identity-stable pair setter (bare useState setter + ref write): it is closed
+  // over by the transport useMemo([]), so it MUST NOT capture state.
+  const setResumedTurnPair = useCallback((v: boolean) => {
+    resumedTurnRef.current = v;
+    setResumedTurn(v);
+  }, []);
+
+  // Mount-time resume gating (in refs — computed once for this mount; the parent
+  // remounts per chat via `key`).
+  //
+  // Attempt resume for any non-settled tail: a streaming tail (strip + expect
+  // live replay) or a user tail (the run may exist but its assistant row is not
+  // seeded yet — attach to the pre-opened registry entry and wait for frames).
+  // A settled assistant tail must NEVER resume: replaying a finished run into a
+  // store that already contains its message duplicates parts (SDK text-start
+  // always pushes a new part).
+  const stripRef = useRef(chatId !== null && isStreamingTail(initialRows ?? []));
+  const attemptResumeRef = useRef(
+    autonomousRunsEnabled === true &&
+      chatId !== null &&
+      !isSettledAssistantTail(initialRows ?? []),
+  );
+  const strippedRowRef = useRef<IAiChatMessageRow | null>(
+    stripRef.current ? (initialRows ?? [])[initialRows!.length - 1] : null,
+  );
 
   const initialMessages = useMemo<UIMessage[]>(
-    () => (initialRows ?? []).map(rowToUiMessage),
+    () =>
+      seedRows(
+        initialRows ?? [],
+        attemptResumeRef.current && stripRef.current,
+      ).map(rowToUiMessage),
     [initialRows],
   );
 
@@ -153,6 +285,14 @@ export default function ChatThread({
   const openPageRef = useRef<OpenPageContext | null>(openPage ?? null);
   openPageRef.current = openPage ?? null;
 
+  // Keep the selection snapshotter in a ref, same rationale as openPageRef: the
+  // transport useMemo([]) closes it over, so prop-identity churn must not matter.
+  // Called at send time inside prepareSendMessagesRequest (#388).
+  const getEditorSelectionRef = useRef<
+    (() => EditorSelectionContext | null) | undefined
+  >(getEditorSelection);
+  getEditorSelectionRef.current = getEditorSelection;
+
   // Keep the selected role id in a ref, same rationale as openPageRef. Only the
   // FIRST request of a brand-new chat uses it (the server persists it then and
   // ignores it for existing chats), but sending it on every send is harmless.
@@ -216,6 +356,36 @@ export default function ChatThread({
   const flushOnAbortRef = useRef(false);
   const interruptNextSendRef = useRef(false);
 
+  // #396: one-shot arm for the bounded 409 A_RUN_ALREADY_ACTIVE retry on the
+  // "Interrupt and send now" re-send in autonomous mode. sendNow triggers the
+  // authoritative server stop of the detached run, but that stop and the
+  // onFinish->flushNext re-POST race: the new POST can hit the one-active-run
+  // gate before the old detached run has settled, yielding a spurious 409. When
+  // this ref is armed, the transport's send path retries that 409 with a short
+  // bounded backoff (the server stop guarantees convergence). A normal send (ref
+  // not armed) must STILL fail a 409 instantly (e.g. a genuine two-tab conflict).
+  //
+  // INVARIANT: sendNow arms this only to be consumed by the ONE re-POST that
+  // flushNext fires from onFinish. But that re-POST does not always happen (the
+  // promoted head may be gone, the finish may be a resumed turn, or the arm may
+  // race a stale finish). To keep the arm strictly one-shot it is disarmed on
+  // EVERY path where the paired interrupt one-shots (flushOnAbortRef /
+  // interruptNextSendRef) are cleared without a POST: the transport POST branch
+  // consumes it (read-and-clear), the onFinish `!flushNext()` no-send branch
+  // clears it, and the isStreaming-defuse effect clears it symmetrically. So it
+  // can never leak into a later, unrelated send and retry that send's genuine 409.
+  const supersedeRetryRef = useRef(false);
+
+  // #234 F5: the user pressed Stop while streaming a BRAND-NEW chat whose server
+  // chat id has not been adopted yet (the `start` chunk carrying it hadn't landed
+  // when Stop was pressed). A local SSE abort alone does NOT stop the DETACHED
+  // autonomous run — it keeps burning tokens and WRITING TO PAGES — so we cannot
+  // just no-op. We latch the stop as PENDING and fire the authoritative server
+  // stop the moment onServerChatId adopts the id (below). Read-and-cleared there;
+  // also defused on every new turn start so it can never fire against a later,
+  // unrelated turn's run.
+  const stopPendingRef = useRef(false);
+
   // FIFO dequeue + send the next queued message (no-op when the queue is empty).
   // Returns whether a message was actually sent, so callers can tell an empty
   // dequeue (nothing to flush) from a real send.
@@ -223,9 +393,12 @@ export default function ChatThread({
     const { head, rest } = dequeue(queuedRef.current);
     if (!head) return false;
     setQueue(rest);
+    // Local send: clear any resume-suppression flag so this genuine local turn's
+    // onFinish flushes normally (invariant 8).
+    setResumedTurnPair(false);
     sendMessageRef.current?.({ text: head.text });
     return true;
-  }, [setQueue]);
+  }, [setQueue, setResumedTurnPair]);
 
   const enqueue = useCallback(
     (text: string) => {
@@ -245,6 +418,87 @@ export default function ChatThread({
       new DefaultChatTransport<UIMessage>({
         api: "/api/ai-chat/stream",
         credentials: "include",
+        prepareReconnectToStreamRequest: () => ({
+          // SDK default URL uses the useChat STORE id — always build from the real chat id.
+          // ?expect=live&anchor=<row id> ONLY when we stripped a streaming tail: expect=live
+          // is the only case where a finished-retained replay is safe (the row is stripped,
+          // replay rebuilds it), and the anchor pins the replay to OUR run — a mismatching
+          // (newer) run must 204 into the restore+poll path instead of replaying a foreign
+          // transcript into this store.
+          api: `/api/ai-chat/runs/${chatIdRef.current}/stream${
+            stripRef.current
+              ? `?expect=live&anchor=${strippedRowRef.current!.id}`
+              : ""
+          }`,
+        }),
+        fetch: async (input: RequestInfo | URL, init: RequestInit = {}) => {
+          if ((init.method ?? "GET") !== "GET") {
+            // Send path (POST). #396: read-and-clear the one-shot supersede arm
+            // here so it is strictly scoped to THIS send. When unarmed, behave
+            // exactly as before — a single fetch, a 409 surfaces instantly (a
+            // genuine two-tab conflict must NOT be retried).
+            const supersede = supersedeRetryRef.current;
+            supersedeRetryRef.current = false;
+            if (!supersede) return fetch(input, init);
+            // Buffer a ReadableStream body once so each retry can replay it.
+            // DefaultChatTransport sends the body as a JSON STRING (replayable as
+            // is), but guard defensively in case a future SDK streams it.
+            let sendInit = init;
+            if (init.body instanceof ReadableStream) {
+              const buffered = await new Response(init.body).arrayBuffer();
+              sendInit = { ...init, body: buffered };
+            }
+            // Bounded retry: attempt 1 fires immediately, then wait between
+            // attempts per SUPERSEDE_RETRY_DELAYS_MS. Retry ONLY on a real
+            // 409 A_RUN_ALREADY_ACTIVE; any other status/body is returned as-is.
+            for (let attempt = 0; ; attempt++) {
+              const response = await fetch(input, sendInit);
+              if (
+                response.status !== 409 ||
+                attempt >= SUPERSEDE_RETRY_DELAYS_MS.length ||
+                !(await isRunAlreadyActive(response))
+              ) {
+                return response;
+              }
+              // The old detached run has not released the one-active-run slot
+              // yet; the server stop we requested guarantees it will, so back off
+              // and re-POST (the 409 fired before the user message was persisted,
+              // so re-POSTing is safe — no duplicate rows).
+              await new Promise((r) =>
+                setTimeout(r, SUPERSEDE_RETRY_DELAYS_MS[attempt]),
+              );
+            }
+          }
+          // Reconnect GET: the SDK passes no AbortSignal, so wire our own controller
+          // for observer Stop / unmount abort.
+          const controller = new AbortController();
+          attachAbortRef.current = controller;
+          try {
+            const response = await fetch(input, {
+              ...init,
+              signal: controller.signal,
+            });
+            // No onFinish will come for a 204 (silent no-op) OR any non-2xx
+            // (5xx/502 — a server restart mid-attach). Both run the same
+            // no-active-stream recovery: restore the stripped row, invalidate, and
+            // arm the degraded poll (idempotent via noStreamHandledRef; its part-d
+            // also clears the resumedTurn flag). This is the restart-survival path
+            // the removed F7 latch used to guard — a transient attach failure must
+            // NOT drop the in-progress row or stop tracking the durable run.
+            if (response.status === 204 || !response.ok)
+              onNoActiveStreamRef.current?.();
+            // #430: a 2xx stream re-attached (live tail or finished-replay). Signal
+            // the reconnect controller to clear its banner. No-op outside an active
+            // reconnect sequence (e.g. the mount attach), so it is safe here.
+            else onReconnectAttachedRef.current?.();
+            return response;
+          } catch (err) {
+            // Network throw: same no-onFinish recovery, then rethrow so the SDK
+            // still surfaces the error to its own machinery.
+            onNoActiveStreamRef.current?.();
+            throw err;
+          }
+        },
         // Inject the chat id and the currently-open page alongside the useChat
         // messages so the server can resolve an existing chat (or create one
         // when null) and tell the agent which page "this page" refers to. Both
@@ -261,7 +515,16 @@ export default function ChatThread({
             body: {
               ...body,
               chatId: chatIdRef.current,
-              openPage: openPageRef.current,
+              // Attach the live editor selection to the open-page context at send
+              // time — "this"/"here" in the user's message means THIS selection.
+              // Nested inside openPage so it dies with the page when the server
+              // rejects the page id (#388). Null when nothing is selected.
+              openPage: openPageRef.current
+                ? {
+                    ...openPageRef.current,
+                    selection: getEditorSelectionRef.current?.() ?? null,
+                  }
+                : null,
               // Honoured by the server only when creating a new chat; null =>
               // universal assistant.
               roleId: roleIdRef.current,
@@ -274,7 +537,15 @@ export default function ChatThread({
     [],
   );
 
-  const { messages, sendMessage, status, stop, error } = useChat({
+  const {
+    messages,
+    sendMessage,
+    status,
+    stop,
+    error,
+    setMessages,
+    resumeStream,
+  } = useChat({
     // Stable per-mount key. Existing chats use their real id; new chats use a
     // generated client id (never `undefined`) so the store is NOT re-created on
     // every render mid-stream (see `chatStoreId` above).
@@ -292,6 +563,63 @@ export default function ChatThread({
     // would be wrong, so on Stop/disconnect/error the queue is left intact for
     // the user to decide.
     onFinish: ({ message, isAbort, isDisconnect, isError }) => {
+      // (1) Capture whether THIS finish belongs to a resumed (attach) turn and
+      // immediately clear the flag so it can never suppress a LATER local turn.
+      const wasResumed = resumedTurnRef.current;
+      setResumedTurnPair(false);
+      // (2) Recovery after a starved/torn resumed finish (invariant 9). The arm
+      // and the stripped-row restore are gated DIFFERENTLY. Skip entirely once
+      // unmounted (an abort-triggered onFinish landing after a chat switch must
+      // not arm a poll / invalidate on the new chat).
+      if (wasResumed && mountedRef.current) {
+        const hasVisibleContent = assistantMessageHasVisibleContent(message);
+        // ARM the reconcile + degraded poll when the resumed message carries no
+        // visible content (starved replay) OR the connection dropped mid-run — in
+        // both cases the poll must drive the row to its real terminal state.
+        if (isDisconnect || !hasVisibleContent) {
+          reconcileTailRef.current = true;
+          queryClient.invalidateQueries({
+            queryKey: AI_CHAT_MESSAGES_RQ_KEY(chatIdRef.current),
+          });
+          onResumeFallback?.(true);
+        }
+        // RESTORE the stripped streaming row ONLY when the resumed message has no
+        // visible content. On isDisconnect WITH visible content restore is
+        // FORBIDDEN: the live stream may have advanced far past the mount-time
+        // snapshot, so restoring would clobber on-screen content (invariant 9) —
+        // the arm above suffices, the poll reaches the true terminal.
+        if (!hasVisibleContent && strippedRowRef.current) {
+          setMessages((prev) =>
+            mergeById(prev, rowToUiMessage(strippedRowRef.current!)),
+          );
+        }
+      }
+      // (2b) #430: a LIVE (non-resumed) detached run whose SSE just dropped. The
+      // server run keeps executing, so instead of a dead "Lost connection" banner
+      // start a reconnect sequence: pin the CURRENT streaming assistant row as the
+      // strip/anchor (the live tail is the already-shown partial in `messages`, not
+      // a persistent row) and re-attach to the live tail via the resumable machinery.
+      const startedReconnect =
+        isDisconnect &&
+        !wasResumed &&
+        autonomousRunsEnabled === true &&
+        mountedRef.current &&
+        message?.role === "assistant" &&
+        typeof message.id === "string";
+      if (startedReconnect) {
+        beginReconnect({
+          id: message.id,
+          role: "assistant",
+          content: "",
+          status: "streaming",
+          createdAt: new Date().toISOString(),
+          // Preserve the partial parts so a 204 restore (onNoActiveStream) re-shows
+          // what was on screen while the degraded poll catches the run up to
+          // terminal (rowToUiMessage prefers metadata.parts).
+          metadata: { parts: message.parts },
+        });
+      }
+      // (3) Standard branches.
       // Forward the authoritative server chatId (streamed on the assistant
       // message metadata) so the parent adopts the REAL created chat id for a new
       // chat — see adopt-chat-id.ts for the full #137 design. `threadKey` lets the
@@ -300,10 +628,16 @@ export default function ChatThread({
       onTurnFinished(extractServerChatId(message), threadKey);
       // Show a neutral "stopped" marker for an aborted turn; the red error banner
       // (via `error`) already covers isError, and a clean finish clears any marker.
+      // On a live disconnect that STARTED a reconnect, suppress the terminal
+      // "connection lost" notice — the reconnect banner takes over (#430).
       if (isError) setStopNotice(null);
       else if (isAbort) setStopNotice("manual");
-      else if (isDisconnect) setStopNotice("disconnect");
+      else if (isDisconnect) setStopNotice(startedReconnect ? null : "disconnect");
       else setStopNotice(null);
+      // A resumed turn NEVER flushes the queue (invariant 7): skip BOTH the
+      // flush-on-abort branch and the plain flush. The local streamer is the only
+      // tab that owns the queue.
+      if (wasResumed) return;
       // "Send now": WE triggered this abort to interrupt the current turn and
       // immediately send the promoted head. Flush it even though the turn was
       // aborted (the normal abort path below keeps the queue intact). The
@@ -314,13 +648,24 @@ export default function ChatThread({
         setStopNotice(null);
         // If the promoted head vanished (e.g. the user removed it before the
         // abort landed) flushNext sends nothing — clear the one-shot interrupt
-        // tag so it can't leak onto the next unrelated send. On a real send the
-        // tag is consumed by prepareSendMessagesRequest and stays untouched.
-        if (!flushNext()) interruptNextSendRef.current = false;
+        // tag AND the #396 supersede arm so neither can leak onto the next
+        // unrelated send (no re-POST will consume the arm here). On a real send
+        // the tag is consumed by prepareSendMessagesRequest and the arm by the
+        // transport POST branch, so both stay untouched then.
+        if (!flushNext()) {
+          interruptNextSendRef.current = false;
+          supersedeRetryRef.current = false;
+        }
         return;
       }
       if (isAbort || isDisconnect || isError) return;
-      flushNext();
+      // Gate the final flush on the live-mount flag (#486): a clean onFinish can
+      // land AFTER this thread unmounted (a New-chat / chat-switch mid-stream —
+      // the async attach/resume settles late). Flushing then dequeues and POSTs a
+      // queued message from an abandoned thread — a "ghost" send / ghost chat.
+      // Every other queue side effect already guards on mountedRef; this last one
+      // was the gap.
+      if (mountedRef.current) flushNext();
     },
     // `onError` runs in addition to `onFinish` (which ai@6 also calls on error).
     // Log the raw failure here for devtools; the UI shows a friendly classified
@@ -365,7 +710,14 @@ export default function ChatThread({
       return;
     lastForwardedChatIdRef.current = serverChatId;
     onServerChatId(serverChatId);
-  }, [messages, onServerChatId]);
+    // #234 F5: if Stop was pressed before the id was known, the authoritative
+    // server stop was deferred to this adoption point — fire it now with the
+    // just-adopted id. One-shot (read-and-clear) so it can't fire twice.
+    if (stopPendingRef.current) {
+      stopPendingRef.current = false;
+      onServerStop?.(serverChatId);
+    }
+  }, [messages, onServerChatId, onServerStop]);
 
   // Live "turn was interrupted" marker for the CURRENT session. The red error
   // banner (driven by `error`) covers the error case; this covers an aborted
@@ -378,6 +730,227 @@ export default function ChatThread({
 
   const isStreaming = status === "submitted" || status === "streaming";
 
+  // #430: live-disconnect reconnect controller. `null` = idle; `{ trying, attempt }`
+  // = a backoff sequence is running (drives the "reconnecting… (N/max)" banner);
+  // `{ failed }` = attempts exhausted (drives the manual Retry). Mirrored into a ref
+  // so the transport/onNoActiveStream closures branch on the LIVE value.
+  type ReconnectState =
+    | null
+    | { phase: "trying"; attempt: number }
+    | { phase: "failed" };
+  const [reconnectState, setReconnectState] = useState<ReconnectState>(null);
+  const reconnectStateRef = useRef<ReconnectState>(null);
+  const setReconnectStatePair = useCallback((s: ReconnectState) => {
+    reconnectStateRef.current = s;
+    setReconnectState(s);
+  }, []);
+  const reconnectTimerRef = useRef<ReturnType<typeof setTimeout> | null>(null);
+  const clearReconnectTimer = useCallback(() => {
+    if (reconnectTimerRef.current) {
+      clearTimeout(reconnectTimerRef.current);
+      reconnectTimerRef.current = null;
+    }
+  }, []);
+
+  // One reconnect attempt — MIRRORS the mount strip/anchor path for the LIVE case.
+  // beginReconnect pinned strippedRowRef/stripRef to the run's assistant row, so:
+  //  - remove that row from the store (the mount path strips it from the SEED; here
+  //    it is already shown, so filter it out) — the live replay's `text-start` then
+  //    rebuilds it without DUPLICATING parts (the main dedup risk, #430);
+  //  - reset the one-shot 204 guard so onNoActiveStream can fire for THIS attempt;
+  //  - mark the turn resumed (invariant 7/8) so onFinish runs the recovery block and
+  //    never flushes the queue;
+  //  - resumeStream() -> prepareReconnectToStreamRequest builds
+  //    ?expect=live&anchor=<pinned id>, pinning the replay to OUR run (invariant 6).
+  const attemptReconnectOnce = useCallback(
+    (attempt: number) => {
+      if (!mountedRef.current) return;
+      const anchor = strippedRowRef.current;
+      if (anchor) {
+        setMessages((prev) => prev.filter((m) => m.id !== anchor.id));
+      }
+      noStreamHandledRef.current = false;
+      setResumedTurnPair(true);
+      setReconnectStatePair({ phase: "trying", attempt });
+      void resumeStream();
+    },
+    [setMessages, setResumedTurnPair, setReconnectStatePair, resumeStream],
+  );
+
+  // Schedule attempt `attempt` after an exponential backoff.
+  const scheduleReconnectAttempt = useCallback(
+    (attempt: number) => {
+      clearReconnectTimer();
+      setReconnectStatePair({ phase: "trying", attempt });
+      reconnectTimerRef.current = setTimeout(
+        () => attemptReconnectOnce(attempt),
+        RECONNECT_BASE_DELAY_MS * 2 ** (attempt - 1),
+      );
+    },
+    [clearReconnectTimer, setReconnectStatePair, attemptReconnectOnce],
+  );
+
+  // Start a fresh reconnect sequence, pinning `anchorRow` (the live run's assistant
+  // row) as the strip/anchor reused by every attempt.
+  const beginReconnect = useCallback(
+    (anchorRow: IAiChatMessageRow) => {
+      if (!autonomousRunsEnabled || !mountedRef.current) return;
+      strippedRowRef.current = anchorRow;
+      stripRef.current = true;
+      scheduleReconnectAttempt(1);
+    },
+    [autonomousRunsEnabled, scheduleReconnectAttempt],
+  );
+
+  // Manual Retry (shown once attempts are exhausted): restart at attempt 1 and fire
+  // immediately (the user asked for it now — no backoff).
+  const retryReconnect = useCallback(() => {
+    clearReconnectTimer();
+    attemptReconnectOnce(1);
+  }, [clearReconnectTimer, attemptReconnectOnce]);
+
+  // Live SSE re-attached (the reconnect GET returned a 2xx stream): clear the
+  // banner + any pending backoff. No-op outside a sequence (e.g. the mount attach).
+  const onReconnectAttached = useCallback(() => {
+    if (!mountedRef.current || !reconnectStateRef.current) return;
+    clearReconnectTimer();
+    setReconnectStatePair(null);
+  }, [clearReconnectTimer, setReconnectStatePair]);
+  onReconnectAttachedRef.current = onReconnectAttached;
+
+  // The reconnect GET could not attach (204 / error). onNoActiveStream has already
+  // armed the degraded poll (the robust fallback that drives the row to terminal
+  // from the DB), so this only decides the LIVE-attach retry: back off and try
+  // again up to the cap, else surface the manual Retry.
+  const onReconnectNoStream = useCallback(() => {
+    const s = reconnectStateRef.current;
+    if (s?.phase !== "trying") return;
+    if (s.attempt < RECONNECT_MAX_ATTEMPTS)
+      scheduleReconnectAttempt(s.attempt + 1);
+    else setReconnectStatePair({ phase: "failed" });
+  }, [scheduleReconnectAttempt, setReconnectStatePair]);
+
+  // 204-handler (`onNoActiveStream`): the attach returned 204 — nothing live to
+  // resume (overflow / begin-failure / after retention / anchor-mismatch). One-
+  // shot via noStreamHandledRef (we do NOT null onNoActiveStreamRef). Exactly four
+  // parts. Kept in a ref (read by the transport's fetch closure) and refreshed
+  // each render below.
+  const onNoActiveStream = useCallback(() => {
+    // A late attach outcome after unmount must not arm a poll / invalidate on the
+    // now-different chat this thread's refs were reused for.
+    if (!mountedRef.current) return;
+    if (noStreamHandledRef.current) return;
+    noStreamHandledRef.current = true;
+    // (a) Restore the stripped streaming row to the store — ONLY when we actually
+    // stripped one (a user-tail 204 does NOT reach here with a stripped row, so do
+    // not dereference null).
+    if (strippedRowRef.current) {
+      setMessages((prev) =>
+        mergeById(prev, rowToUiMessage(strippedRowRef.current!)),
+      );
+    }
+    // (b) Reconcile the tail from the message history + invalidate it so the
+    // degraded poll starts from a fresh fetch.
+    reconcileTailRef.current = true;
+    queryClient.invalidateQueries({
+      queryKey: AI_CHAT_MESSAGES_RQ_KEY(chatIdRef.current),
+    });
+    // (c) Arm the degraded poll (a dumb timer with a 10-min cap in the window);
+    // the thread disarms it via onResumeFallback(false) on settle / local stream.
+    onResumeFallback?.(true);
+    // (d) 204 means onFinish will NOT fire — clear the suppression flag so it
+    // cannot swallow the NEXT local turn's queue flush.
+    setResumedTurnPair(false);
+    // (e) #430: if this 204/error landed during a live-disconnect reconnect
+    // sequence, back off and retry the live attach (or give up to the manual
+    // Retry). The degraded poll armed in (c) is the fallback either way.
+    onReconnectNoStream();
+  }, [
+    setMessages,
+    queryClient,
+    onResumeFallback,
+    setResumedTurnPair,
+    onReconnectNoStream,
+  ]);
+  onNoActiveStreamRef.current = onNoActiveStream;
+
+  // Mount effect: kick off the resume attempt for a non-settled tail. Marking the
+  // turn as resumed BEFORE resumeStream so onFinish (invariant 7/8) sees it.
+  useEffect(() => {
+    // Re-arm on (re)mount — StrictMode dev-mounts twice, and the cleanup below
+    // flips this false between the two.
+    mountedRef.current = true;
+    if (attemptResumeRef.current) {
+      setResumedTurnPair(true);
+      void resumeStream();
+    }
+    // Unmount: mark unmounted (gates late attach/onFinish side-effects) and abort
+    // the in-flight attach GET so its callbacks don't fire against the next chat.
+    return () => {
+      mountedRef.current = false;
+      attachAbortRef.current?.abort();
+      // #430: drop any pending reconnect backoff so it can't fire against the next
+      // chat this thread's refs are reused for.
+      if (reconnectTimerRef.current) clearTimeout(reconnectTimerRef.current);
+    };
+    // Mount-only by design; the parent remounts per chat via `key`.
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, []);
+
+  // Reconciliation + degraded-merge (invariant 8). Deps are EXACTLY
+  // [initialRows, isStreaming, setMessages].
+  useEffect(() => {
+    // A local stream owns the view: disarm BOTH the merge and the window poll.
+    if (isStreaming) {
+      reconcileTailRef.current = false;
+      onResumeFallback?.(false);
+      return;
+    }
+    if (!reconcileTailRef.current) return;
+    const rows = initialRows ?? [];
+    const tail = rows[rows.length - 1];
+    if (!tail || tail.role !== "assistant") return;
+    // Merge the polled assistant tail on EVERY initialRows update — while the
+    // degraded poll is active this IS the live per-step progress.
+    setMessages((prev) => mergeById(prev, rowToUiMessage(tail)));
+    // Anchor-mismatch coherence: when we restored a stripped streaming row A but a
+    // DIFFERENT run's row B is now the tail (A finished, B replaced the registry
+    // entry, so the attach 204'd), A would otherwise linger forever as an orphan
+    // jumping-dots row over the real run. Settle it from fresh history (where A is
+    // now persisted) so no phantom row survives. No-op in the common case where A
+    // IS the tail (id match).
+    const stripped = strippedRowRef.current;
+    if (stripped && stripped.id !== tail.id) {
+      const historical = rows.find((r) => r.id === stripped.id);
+      if (historical)
+        setMessages((prev) => mergeById(prev, rowToUiMessage(historical)));
+    }
+    // Settled: the terminal merge is done — disarm the flag AND the window poll
+    // explicitly (the window only has a time cap, it will not disarm itself).
+    if (tail.status !== "streaming") {
+      reconcileTailRef.current = false;
+      onResumeFallback?.(false);
+      // #430: the run reached its terminal state via the degraded poll — there is
+      // no live tail left to reconnect to, so drop any reconnect banner / Retry.
+      clearReconnectTimer();
+      setReconnectStatePair(null);
+    }
+    // onResumeFallback intentionally omitted (parent-stable callback); deps are
+    // fixed by the resume design.
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, [initialRows, isStreaming, setMessages]);
+
+  // #430: a real stream is live again — the reconnect re-attached to the live tail
+  // (status -> "streaming") OR the user started a new local turn. Either way clear
+  // the reconnect banner + any pending backoff. Gated on "streaming" (not the
+  // broader "submitted") so a still-pending attach GET does not clear prematurely.
+  useEffect(() => {
+    if (status === "streaming") {
+      clearReconnectTimer();
+      setReconnectStatePair(null);
+    }
+  }, [status, clearReconnectTimer, setReconnectStatePair]);
+
   // "Send now" on a queued message: interrupt the current turn and immediately
   // send THIS message, keeping the agent's partial output. Other queued messages
   // stay queued and flush normally after the new turn. Reuses the existing
@@ -397,18 +970,90 @@ export default function ChatThread({
         setQueue(promoteToHead(queuedRef.current, id));
         flushOnAbortRef.current = true;
         interruptNextSendRef.current = true;
+        // #396: in autonomous mode the turn is a DETACHED run — a local stop()
+        // is only a client disconnect the server ignores, so the run keeps going.
+        // The onFinish->flushNext re-POST would then hit the one-active-run gate
+        // and get a spurious 409 A_RUN_ALREADY_ACTIVE. Mirror handleStop: request
+        // the AUTHORITATIVE server stop so the detached run settles, and arm the
+        // one-shot bounded 409 retry BEFORE stop() so the re-send converges once
+        // the slot frees. Read chatId live from chatIdRef (adopted at the `start`
+        // chunk). If it is not known yet (brand-new chat, first moment of its
+        // first turn), defer the server stop via stopPendingRef exactly as
+        // handleStop does — the onServerChatId adoption effect fires it once the
+        // id lands; the retry stays armed so the re-send still converges then.
+        if (autonomousRunsEnabled) {
+          supersedeRetryRef.current = true; // arm the bounded 409 retry
+          if (chatIdRef.current) {
+            onServerStop?.(chatIdRef.current);
+          } else {
+            // Same #234-F5 sub-window limitation documented in handleStop: if the
+            // local abort below cancels the reader before the `start` chunk lands,
+            // the adoption effect never runs and the deferred stop never fires. Not
+            // a regression; at minimum we don't strand refs (the isStreaming effect
+            // defuses stopPendingRef on the next turn start).
+            stopPendingRef.current = true;
+          }
+        }
         stop(); // -> onFinish({ isAbort: true }) flushes the promoted head
       } else {
         // Nothing to interrupt: just send it now (no interrupt note).
         const msg = queuedRef.current.find((m) => m.id === id);
         if (!msg) return;
         setQueue(removeQueuedById(queuedRef.current, id));
+        // Local send: clear any resume-suppression flag (invariant 8).
+        setResumedTurnPair(false);
         sendMessageRef.current?.({ text: msg.text });
       }
     },
-    [setQueue, stop],
+    [setQueue, stop, setResumedTurnPair, autonomousRunsEnabled, onServerStop],
   );
 
+  // Stop the current turn. ALWAYS abort the local SSE (`stop()`) so the composer
+  // returns to idle immediately. In AUTONOMOUS mode the turn is a DETACHED run:
+  // aborting the local SSE is only a client disconnect, which the server ignores,
+  // so the run would keep executing — we ADDITIONALLY request the authoritative
+  // server-side stop (the parent owns that call + the "stopping" latch that keeps
+  // observer-polling from re-streaming the stopping run's output). The chat id is
+  // read live from chatIdRef (adopted early at the stream's `start` chunk); if it
+  // is not known yet — a brand-new chat in the first moment of its first turn —
+  // only the local abort happens (there is no server-side run handle to stop yet).
+  const handleStop = useCallback(() => {
+    // Abort the resume/attach GET first: the SDK does not pass it a signal, so an
+    // observer's Stop would otherwise leave the attach fetch running.
+    attachAbortRef.current?.abort();
+    stop();
+    // #430: pressing Stop also cancels an in-progress reconnect sequence.
+    clearReconnectTimer();
+    setReconnectStatePair(null);
+    if (!autonomousRunsEnabled) return;
+    if (chatIdRef.current) {
+      onServerStop?.(chatIdRef.current);
+    } else {
+      // #234 F5: no chat id yet (brand-new chat in the first moment of its first
+      // turn, before the `start` chunk adopted the id). Latch the stop as pending;
+      // the onServerChatId adoption effect fires the deferred server stop as soon
+      // as the id appears, so the detached run is still authoritatively stopped
+      // instead of left running by a silent local-only abort.
+      //
+      // KNOWN LIMITATION (#234 F5 review): `stop()` above has already aborted the
+      // local SSE reader. In the rare sub-window where Stop is pressed while still
+      // `submitted` (request sent, not one chunk read yet), that abort can cancel
+      // the reader BEFORE the `start` chunk is applied to `messages`, so the
+      // adoption effect never runs and this pending stop never fires. The detached
+      // run then keeps going for that turn. This is not a regression (the pre-fix
+      // behavior sent no server stop at all); closing it fully would require
+      // deferring the local abort until adoption, which is riskier and out of scope
+      // for this fix. Documented so a future change can address the abort-ordering.
+      stopPendingRef.current = true;
+    }
+  }, [
+    stop,
+    autonomousRunsEnabled,
+    onServerStop,
+    clearReconnectTimer,
+    setReconnectStatePair,
+  ]);
+
   // Clear the stopped marker as soon as a new turn begins streaming, and drop any
   // stale "Send now" interrupt flags. On the legit interrupt path both refs are
   // already consumed synchronously (onFinish + prepareSendMessagesRequest) before
@@ -420,6 +1065,18 @@ export default function ChatThread({
       setStopNotice(null);
       flushOnAbortRef.current = false;
       interruptNextSendRef.current = false;
+      // #396: symmetric with the other one-shot interrupt flags — defuse a stale
+      // supersede arm that was set but whose expected re-POST never fired (the
+      // turn finished in the same tick as the click, or the promoted head was
+      // gone), so it can never leak into this (or a later) turn's send and retry
+      // that send's genuine 409. A legit arm is consumed by the transport POST
+      // branch before this new turn streams, so this does not clobber it.
+      supersedeRetryRef.current = false;
+      // #234 F5: a new turn is starting — drop any pending deferred-stop from a
+      // previous turn that never adopted an id, so it can never fire against this
+      // (or a later) unrelated turn's run. A deferred stop for the CURRENT turn is
+      // set AFTER this effect (on the Stop click), so this does not clobber it.
+      stopPendingRef.current = false;
     }
   }, [isStreaming]);
 
@@ -487,6 +1144,43 @@ export default function ChatThread({
           detail={errorView.detail}
           mb="xs"
         />
+      ) : reconnectState ? (
+        // #430: while auto-reconnecting to a detached run's live tail, show progress
+        // instead of a dead "Lost connection" banner; once attempts are exhausted,
+        // offer a manual Retry (the degraded poll keeps catching up underneath).
+        <Alert
+          variant="light"
+          color="gray"
+          p="xs"
+          mb="xs"
+          style={{ flexShrink: 0 }}
+        >
+          <Group gap={8} wrap="nowrap" align="center">
+            {reconnectState.phase === "trying" ? (
+              <>
+                <Loader size={14} color="gray" style={{ flex: "none" }} />
+                <Text size="sm" lh={1.3} c="dimmed">
+                  {t("Connection lost — reconnecting…")}
+                  {` (${reconnectState.attempt}/${RECONNECT_MAX_ATTEMPTS})`}
+                </Text>
+              </>
+            ) : (
+              <>
+                <Text size="sm" lh={1.3} c="dimmed" style={{ flex: 1 }}>
+                  {t("Couldn't reconnect to the answer.")}
+                </Text>
+                <Button
+                  size="compact-xs"
+                  variant="light"
+                  color="gray"
+                  onClick={retryReconnect}
+                >
+                  {t("Retry")}
+                </Button>
+              </>
+            )}
+          </Group>
+        </Alert>
       ) : stopNotice ? (
         <ChatStoppedNotice
           text={
@@ -512,17 +1206,23 @@ export default function ChatThread({
                 <Text size="xs" lineClamp={2} className={classes.queuedText}>
                   {m.text}
                 </Text>
-                <Tooltip label={t("Interrupt and send now")} withArrow>
-                  <ActionIcon
-                    size="xs"
-                    variant="subtle"
-                    color="blue"
-                    onClick={() => sendNow(m.id)}
-                    aria-label={t("Send now")}
-                  >
-                    <IconPlayerPlayFilled size={12} />
-                  </ActionIcon>
-                </Tooltip>
+                {/* "Send now" (interrupt) is hidden on a RESUMED turn: a local
+                    stop() does not abort the resumed attach fetch, so the click
+                    would be swallowed while flushOnAbortRef would fire minutes
+                    later on the natural finish. Only the remove affordance stays. */}
+                {!resumedTurn && (
+                  <Tooltip label={t("Interrupt and send now")} withArrow>
+                    <ActionIcon
+                      size="xs"
+                      variant="subtle"
+                      color="blue"
+                      onClick={() => sendNow(m.id)}
+                      aria-label={t("Send now")}
+                    >
+                      <IconPlayerPlayFilled size={12} />
+                    </ActionIcon>
+                  </Tooltip>
+                )}
                 <ActionIcon
                   size="xs"
                   variant="subtle"
@@ -537,9 +1237,13 @@ export default function ChatThread({
           </Stack>
         )}
         <ChatInput
-          onSend={(text) => sendMessage({ text })}
+          onSend={(text) => {
+            // Local send: clear any resume-suppression flag (invariant 8).
+            setResumedTurnPair(false);
+            sendMessage({ text });
+          }}
           onQueue={enqueue}
-          onStop={stop}
+          onStop={handleStop}
           isStreaming={isStreaming}
         />
       </Stack>

apps/client/src/features/ai-chat/components/message-item.tsx

@@ -40,6 +40,20 @@ interface MessageItemProps {
    * Defaults to true (internal chat). The public share passes false.
    */
   showCitations?: boolean;
+  /**
+   * Forwarded to ToolCallCard: whether tool cards render the one-line summary of
+   * a call's arguments (e.g. the search query). Defaults to true (internal
+   * chat). The public share passes false so an anonymous reader doesn't see the
+   * agent's raw query/argument text.
+   */
+  showInput?: boolean;
+  /**
+   * Forwarded to ToolCallCard: whether a failed tool card renders its raw
+   * errorText. Defaults to true (internal chat). The public share passes false so
+   * internal detail in a tool error is never painted (belt to the server-side
+   * byte sanitization).
+   */
+  showErrors?: boolean;
   /**
    * Neutralize internal/relative markdown links in the rendered answer (drop
    * their href so they become inert text). Defaults to false (internal chat,
@@ -117,6 +131,8 @@ const MarkdownPart = memo(function MarkdownPart({
 function MessageItem({
   message,
   showCitations = true,
+  showInput = true,
+  showErrors = true,
   neutralizeInternalLinks = false,
   assistantName,
   turnStreaming = false,
@@ -210,6 +226,8 @@ function MessageItem({
               key={index}
               part={part as unknown as ToolUiPart}
               showCitations={showCitations}
+              showInput={showInput}
+              showErrors={showErrors}
             />
           );
         }
@@ -274,6 +292,8 @@ export function arePropsEqual(
   return (
     prev.signature === next.signature &&
     prev.showCitations === next.showCitations &&
+    prev.showInput === next.showInput &&
+    prev.showErrors === next.showErrors &&
     prev.neutralizeInternalLinks === next.neutralizeInternalLinks &&
     prev.assistantName === next.assistantName &&
     // The turn-end flip re-renders every row once (cheap, terminal event) —

apps/client/src/features/ai-chat/components/message-list.tsx

@@ -25,6 +25,19 @@ interface MessageListProps {
    * false because an anonymous reader cannot open the linked internal pages.
    */
   showCitations?: boolean;
+  /**
+   * Forwarded to MessageItem -> ToolCallCard: whether tool cards render the
+   * one-line summary of a call's arguments (e.g. the search query). Defaults to
+   * true (internal chat). The public share passes false so an anonymous reader
+   * doesn't see the agent's raw query/argument text.
+   */
+  showInput?: boolean;
+  /**
+   * Forwarded to MessageItem -> ToolCallCard: whether a failed tool card renders
+   * its raw errorText. Defaults to true (internal chat). The public share passes
+   * false so internal detail in a tool error is never painted.
+   */
+  showErrors?: boolean;
   /**
    * Forwarded to MessageItem: neutralize internal/relative markdown links in
    * the rendered answers (drop their href so they render as inert text).
@@ -119,6 +132,8 @@ export default function MessageList({
   isStreaming,
   emptyState,
   showCitations = true,
+  showInput = true,
+  showErrors = true,
   neutralizeInternalLinks = false,
   assistantName,
 }: MessageListProps) {
@@ -208,6 +223,8 @@ export default function MessageList({
             message={message}
             signature={messageSignature(message)}
             showCitations={showCitations}
+            showInput={showInput}
+            showErrors={showErrors}
             neutralizeInternalLinks={neutralizeInternalLinks}
             assistantName={assistantName}
             // Turn-level liveness, gated to the TAIL row: only the tail message

apps/client/src/features/ai-chat/components/tool-call-card.tsx

@@ -5,6 +5,7 @@ import { useTranslation } from "react-i18next";
 import {
   getToolName,
   toolCitations,
+  toolInputSummary,
   toolLabelKey,
   toolRunState,
   ToolUiPart,
@@ -21,6 +22,24 @@ interface ToolCallCardProps {
    * (the action log itself) while dropping the unusable links.
    */
   showCitations?: boolean;
+  /**
+   * Whether to render the one-line summary of the call's arguments (e.g. the
+   * search query) under the label. Defaults to true (the internal chat). The
+   * public share passes false: an anonymous reader should not see the agent's
+   * raw query/argument text. Conservative and reversible — it only suppresses
+   * the extra summary line, leaving the card (the action log) intact.
+   */
+  showInput?: boolean;
+  /**
+   * Whether to render the tool's raw errorText on a failed call. Defaults to true
+   * (the internal chat, where the operator may debug). The public share passes
+   * false: a tool error string can carry internal detail (an internal page title,
+   * a stack fragment, a provider message). This is the RENDER gate only — the
+   * authoritative fix also sanitizes the bytes server-side (see
+   * PublicShareChatToolsService.forShare), so a share reader never receives raw
+   * error text over the wire, not just never sees it painted (#394).
+   */
+  showErrors?: boolean;
 }
 
 /**
@@ -31,12 +50,15 @@ interface ToolCallCardProps {
 export default function ToolCallCard({
   part,
   showCitations = true,
+  showInput = true,
+  showErrors = true,
 }: ToolCallCardProps) {
   const { t } = useTranslation();
   const toolName = getToolName(part);
   const state = toolRunState(part.state);
   const { key, values } = toolLabelKey(toolName);
   const citations = showCitations ? toolCitations(part) : [];
+  const inputSummary = showInput ? toolInputSummary(part) : undefined;
 
   return (
     <div className={classes.toolCard}>
@@ -57,7 +79,13 @@ export default function ToolCallCard({
         </Text>
       </Group>
 
-      {state === "error" && part.errorText && (
+      {inputSummary && (
+        <Text size="xs" c="dimmed" mt={2} lineClamp={2}>
+          {inputSummary}
+        </Text>
+      )}
+
+      {state === "error" && showErrors && part.errorText && (
         <Text size="xs" c="red" mt={2}>
           {part.errorText}
         </Text>

apps/client/src/features/ai-chat/queries/ai-chat-messages-query.test.tsx

@@ -0,0 +1,90 @@
+import { describe, it, expect, vi, beforeEach } from "vitest";
+import React from "react";
+import { renderHook, waitFor } from "@testing-library/react";
+import { QueryClient, QueryClientProvider } from "@tanstack/react-query";
+
+// react-i18next / notifications are pulled in transitively by ai-chat-query.ts
+// (the mutation hooks use them); stub so the module imports cleanly.
+vi.mock("react-i18next", () => ({
+  useTranslation: () => ({ t: (key: string) => key }),
+}));
+vi.mock("@mantine/notifications", () => ({
+  notifications: { show: vi.fn() },
+}));
+
+// Mock the service module; only getAiChatMessages is exercised, but the other
+// named exports must exist so ai-chat-query.ts imports resolve.
+vi.mock("@/features/ai-chat/services/ai-chat-service.ts", () => ({
+  getAiChatMessages: vi.fn(),
+  getAiChats: vi.fn(),
+  getAiRoleCatalog: vi.fn(),
+  getAiRoleCatalogBundle: vi.fn(),
+  getAiRoles: vi.fn(),
+  importAiRolesFromCatalog: vi.fn(),
+  createAiRole: vi.fn(),
+  deleteAiChat: vi.fn(),
+  deleteAiRole: vi.fn(),
+  renameAiChat: vi.fn(),
+  updateAiRole: vi.fn(),
+  updateAiRoleFromCatalog: vi.fn(),
+}));
+
+import { getAiChatMessages } from "@/features/ai-chat/services/ai-chat-service.ts";
+import { useAiChatMessagesQuery } from "@/features/ai-chat/queries/ai-chat-query.ts";
+
+const emptyPage = { items: [], meta: { hasNextPage: false, nextCursor: null } };
+
+function createWrapper() {
+  const queryClient = new QueryClient({
+    defaultOptions: { queries: { retry: false } },
+  });
+  return function Wrapper({ children }: { children: React.ReactNode }) {
+    return (
+      <QueryClientProvider client={queryClient}>{children}</QueryClientProvider>
+    );
+  };
+}
+
+// The degraded-poll fallback (#184 phase 1.5) is threaded into this query as a
+// `refetchInterval`; AiChatWindow supplies the deliberately-dumb callback. These
+// pin the plumbing the window depends on: the interval polls the message history,
+// and — critically — fetch ERRORS do NOT stop the tick (TanStack v5 resets the
+// failure count each fetch, so the poll must survive a server restart).
+describe("useAiChatMessagesQuery — degraded refetchInterval", () => {
+  beforeEach(() => {
+    vi.clearAllMocks();
+  });
+
+  it("re-polls at the interval while the callback returns a duration", async () => {
+    vi.mocked(getAiChatMessages).mockResolvedValue(emptyPage as never);
+    renderHook(() => useAiChatMessagesQuery("c1", () => 30), {
+      wrapper: createWrapper(),
+    });
+    await waitFor(() =>
+      expect(vi.mocked(getAiChatMessages).mock.calls.length).toBeGreaterThan(2),
+    );
+  });
+
+  it("does NOT re-poll when the callback returns false", async () => {
+    vi.mocked(getAiChatMessages).mockResolvedValue(emptyPage as never);
+    renderHook(() => useAiChatMessagesQuery("c1", () => false), {
+      wrapper: createWrapper(),
+    });
+    await waitFor(() =>
+      expect(vi.mocked(getAiChatMessages)).toHaveBeenCalledTimes(1),
+    );
+    // Give any errant interval a chance to fire, then assert it did not.
+    await new Promise((r) => setTimeout(r, 60));
+    expect(vi.mocked(getAiChatMessages)).toHaveBeenCalledTimes(1);
+  });
+
+  it("keeps ticking through fetch errors (errors do not gate the poll)", async () => {
+    vi.mocked(getAiChatMessages).mockRejectedValue(new Error("server down"));
+    renderHook(() => useAiChatMessagesQuery("c1", () => 30), {
+      wrapper: createWrapper(),
+    });
+    await waitFor(() =>
+      expect(vi.mocked(getAiChatMessages).mock.calls.length).toBeGreaterThan(2),
+    );
+  });
+});

apps/client/src/features/ai-chat/queries/ai-chat-query.ts

@@ -1,6 +1,7 @@
 import {
   useInfiniteQuery,
   useMutation,
+  useQueries,
   useQuery,
   useQueryClient,
 } from "@tanstack/react-query";
@@ -52,15 +53,21 @@ export const AI_CHAT_MESSAGES_RQ_KEY = (chatId: string) => [
   chatId,
 ];
 
-/** Paginated list of the current user's chats (auto-loads further pages). */
-export function useAiChatsQuery() {
+/**
+ * Paginated list of the current user's chats (auto-loads further pages).
+ * `enabled` (default true) lets the AI chat window skip fetching while it is
+ * closed — the list is only needed once the window is open.
+ */
+export function useAiChatsQuery(enabled: boolean = true) {
   const query = useInfiniteQuery({
     queryKey: AI_CHATS_RQ_KEY,
-    queryFn: ({ pageParam }) =>
-      getAiChats({ cursor: pageParam, limit: 50 }),
+    queryFn: ({ pageParam }) => getAiChats({ cursor: pageParam, limit: 50 }),
     initialPageParam: undefined as string | undefined,
     getNextPageParam: (lastPage) =>
-      lastPage.meta.hasNextPage ? (lastPage.meta.nextCursor ?? undefined) : undefined,
+      lastPage.meta.hasNextPage
+        ? (lastPage.meta.nextCursor ?? undefined)
+        : undefined,
+    enabled,
   });
 
   const data = useMemo<IPagination<IAiChat> | undefined>(() => {
@@ -83,15 +90,29 @@ export function useAiChatsQuery() {
  * Load all persisted messages of a chat (oldest first), flattening the
  * paginated server response. Used to seed `useChat` initial messages.
  */
-export function useAiChatMessagesQuery(chatId: string | undefined) {
+export function useAiChatMessagesQuery(
+  chatId: string | undefined,
+  // #184 phase 1.5: the degraded-poll fallback. When a tab could not attach to a
+  // still-running run (the attach returned 204 / the resumed stream ended with no
+  // terminal row), the window arms a dumb timed poll of the message history to
+  // follow the detached run to settle. The callback form lives in AiChatWindow;
+  // threaded here verbatim so this query owns the polling. Undefined => no poll.
+  refetchInterval?: number | false | (() => number | false),
+  // #344: gate the query so a backgrounded/hidden window stops issuing refetches
+  // and duplicating work. Defaults to enabled to preserve existing call-sites.
+  enabled: boolean = true,
+) {
   const query = useInfiniteQuery({
     queryKey: AI_CHAT_MESSAGES_RQ_KEY(chatId ?? ""),
     queryFn: ({ pageParam }) =>
       getAiChatMessages({ chatId: chatId as string, cursor: pageParam }),
     initialPageParam: undefined as string | undefined,
     getNextPageParam: (lastPage) =>
-      lastPage.meta.hasNextPage ? (lastPage.meta.nextCursor ?? undefined) : undefined,
-    enabled: !!chatId,
+      lastPage.meta.hasNextPage
+        ? (lastPage.meta.nextCursor ?? undefined)
+        : undefined,
+    enabled: !!chatId && enabled,
+    refetchInterval,
   });
 
   // useInfiniteQuery only fetches the first page on its own. The hook's contract
@@ -272,6 +293,29 @@ export function useAiRoleCatalogBundleQuery(
   });
 }
 
+/**
+ * Eagerly open EVERY listed bundle's content in parallel for one language. The
+ * redesigned catalog shows each bundle's status summary in its COLLAPSED header,
+ * which needs every role's install state up front — so contents can no longer be
+ * lazy-loaded on expand. The catalog is small, so a fan-out of `useQueries` (one
+ * cached read per bundle, sharing the same cache keys as
+ * `useAiRoleCatalogBundleQuery`) is cheap. Gated by `enabled` (modal open + a
+ * resolved language) so nothing fetches while the modal is closed.
+ */
+export function useAiRoleCatalogBundlesQueries(
+  bundleIds: string[],
+  language: string,
+  enabled: boolean,
+) {
+  return useQueries({
+    queries: bundleIds.map((bundleId) => ({
+      queryKey: AI_ROLE_CATALOG_BUNDLE_RQ_KEY(bundleId, language),
+      queryFn: () => getAiRoleCatalogBundle(bundleId, language),
+      enabled: enabled && !!language,
+    })),
+  });
+}
+
 export function useImportAiRolesFromCatalogMutation() {
   const queryClient = useQueryClient();
   const { t } = useTranslation();
@@ -280,11 +324,14 @@ export function useImportAiRolesFromCatalogMutation() {
     mutationFn: (payload) => importAiRolesFromCatalog(payload),
     onSuccess: (result) => {
       notifications.show({
-        message: t("Imported {{created}}, renamed {{renamed}}, skipped {{skipped}}", {
-          created: result.created,
-          renamed: result.renamed,
-          skipped: result.skipped,
-        }),
+        message: t(
+          "Imported {{created}}, renamed {{renamed}}, skipped {{skipped}}",
+          {
+            created: result.created,
+            renamed: result.renamed,
+            skipped: result.skipped,
+          },
+        ),
       });
       // Surface partial failures (e.g. unique-name races) as a red warning.
       if (result.errors.length > 0) {

apps/client/src/features/ai-chat/queries/import-from-catalog-message.test.tsx

@@ -77,7 +77,14 @@ describe("useImportAiRolesFromCatalogMutation — success notifications", () =>
   });
 
   it("errors:[] -> only the summary notification (counts interpolated)", async () => {
-    await runMutation({ created: 3, renamed: 1, skipped: 2, errors: [] });
+    await runMutation({
+      created: 3,
+      renamed: 1,
+      skipped: 2,
+      errors: [],
+      createdRoles: [],
+      skippedRoles: [],
+    });
     expect(notificationsShowMock).toHaveBeenCalledTimes(1);
     expect(notificationsShowMock).toHaveBeenCalledWith({
       message: "Imported 3, renamed 1, skipped 2",
@@ -93,6 +100,8 @@ describe("useImportAiRolesFromCatalogMutation — success notifications", () =>
         { slug: "a", message: "name taken" },
         { slug: "b", message: "name taken" },
       ],
+      createdRoles: [{ slug: "ok", name: "Ok" }],
+      skippedRoles: [],
     });
     expect(notificationsShowMock).toHaveBeenCalledTimes(2);
     expect(notificationsShowMock).toHaveBeenNthCalledWith(1, {

apps/client/src/features/ai-chat/services/ai-chat-service.ts

@@ -42,6 +42,21 @@ export async function getAiChatMessages(
   return req.data;
 }
 
+/**
+ * Explicitly STOP the active agent run of a chat (#184). This is the ONLY thing
+ * that ends a DETACHED run — a mere browser disconnect (aborting the local SSE)
+ * is deliberately ignored server-side, so the client must call this to actually
+ * stop an autonomous run. Targeted by `chatId` (the server resolves whatever run
+ * is active on it); owner-gated server-side. Returns `{ stopped }` — false when
+ * there was nothing active to stop.
+ */
+export async function stopRun(
+  chatId: string,
+): Promise<{ stopped: boolean }> {
+  const req = await api.post<{ stopped: boolean }>("/ai-chat/stop", { chatId });
+  return req.data;
+}
+
 /**
  * Resolve the chat bound to a document (the current user's most-recent chat
  * created on that page), or null when there is none. Drives auto-open-on-page.

apps/client/src/features/ai-chat/types/ai-chat.types.ts

@@ -108,12 +108,25 @@ export interface IAiRoleImportPayload {
   conflict: "skip" | "rename";
 }
 
-/** Import result counts (mirrors `importFromCatalog()`). */
+/**
+ * Import result (mirrors `importFromCatalog()`). The counters (`created`,
+ * `skipped`, `renamed`) drive the summary notification; the per-role lists
+ * (`createdRoles`, `skippedRoles`) drive the redesigned catalog modal's inline
+ * result plaque — which roles were installed (and any rename) and which were
+ * skipped and why (so the plaque can name the conflicting role and offer
+ * "Rename & install").
+ */
 export interface IAiRoleImportResult {
   created: number;
   skipped: number;
   renamed: number;
   errors: { slug: string; message: string }[];
+  createdRoles: { slug: string; name: string; renamedTo?: string }[];
+  skippedRoles: {
+    slug: string;
+    name: string;
+    reason: "name-conflict" | "already-installed";
+  }[];
 }
 
 /**
@@ -197,6 +210,11 @@ export interface IAiChatMessageRow {
     // renders a "stopped" marker on interrupted turns.
     finishReason?: string;
   } | null;
+  // Persisted lifecycle status of the row's turn, carried on the wire by
+  // `baseFields`. 'streaming' marks a still-in-progress assistant row (used by
+  // the resume machinery to decide whether a tail is a live stream to attach to
+  // or a settled row that must not be replayed).
+  status?: string;
   createdAt: string;
 }
 

apps/client/src/features/ai-chat/utils/catalog-bundle-model.test.ts

@@ -0,0 +1,234 @@
+import { describe, it, expect } from "vitest";
+import {
+  bundleCounts,
+  bundlePhase,
+  installedLangForRole,
+  mapBundleRolesToView,
+  mapCatalogRoleToView,
+  nameConflictSlugs,
+  partialOffersRename,
+  type CatalogViewRole,
+} from "./catalog-bundle-model.ts";
+import type {
+  IAiRole,
+  IAiRoleCatalogRole,
+} from "@/features/ai-chat/types/ai-chat.types.ts";
+
+function installedRole(
+  source: { slug: string; language: string; version: number },
+  overrides: Partial<IAiRole> = {},
+): IAiRole {
+  return {
+    id: `role-${source.slug}-${source.language}`,
+    name: source.slug,
+    emoji: null,
+    description: null,
+    enabled: true,
+    autoStart: true,
+    launchMessage: null,
+    source,
+    ...overrides,
+  };
+}
+
+function catalogRole(
+  overrides: Partial<IAiRoleCatalogRole> = {},
+): IAiRoleCatalogRole {
+  return {
+    slug: "writer",
+    emoji: "✍️",
+    name: "Writer",
+    description: "Drafts copy.",
+    instructions: "be a writer",
+    autoStart: true,
+    launchMessage: null,
+    version: 3,
+    ...overrides,
+  };
+}
+
+// Build a minimal view role for bundlePhase tests.
+function viewRole(status: CatalogViewRole["status"]): CatalogViewRole {
+  return { slug: `s-${status}`, name: status, description: "", version: 1, status };
+}
+
+describe("bundlePhase", () => {
+  it("empty bundle -> empty", () => {
+    expect(bundlePhase([])).toBe("empty");
+  });
+
+  it("all importable, none installed -> allNew", () => {
+    expect(bundlePhase([viewRole("import"), viewRole("import")])).toBe(
+      "allNew",
+    );
+  });
+
+  it("nothing to import or update -> allInstalled", () => {
+    expect(bundlePhase([viewRole("installed"), viewRole("installed")])).toBe(
+      "allInstalled",
+    );
+  });
+
+  it("updates present, nothing to import -> updates", () => {
+    expect(bundlePhase([viewRole("update"), viewRole("installed")])).toBe(
+      "updates",
+    );
+  });
+
+  it("import + installed (no updates) -> mixed", () => {
+    expect(bundlePhase([viewRole("import"), viewRole("installed")])).toBe(
+      "mixed",
+    );
+  });
+
+  it("import + update -> mixed", () => {
+    expect(bundlePhase([viewRole("import"), viewRole("update")])).toBe("mixed");
+  });
+
+  it("a skipped role with nothing installed -> mixed (NOT allInstalled)", () => {
+    // F1: a bundle whose only non-installed role was skipped has 0 installed for
+    // it, so the collapsed 'All installed · up to date' header would contradict
+    // the open 'Installed 0 · 1 skipped' plaque. It must be mixed until resolved.
+    expect(bundlePhase([viewRole("skipped")])).toBe("mixed");
+  });
+
+  it("installed + a skipped role -> mixed (partial success is not allInstalled)", () => {
+    expect(bundlePhase([viewRole("installed"), viewRole("skipped")])).toBe(
+      "mixed",
+    );
+  });
+});
+
+describe("bundleCounts", () => {
+  it("tallies each status once", () => {
+    expect(
+      bundleCounts([
+        viewRole("import"),
+        viewRole("import"),
+        viewRole("installed"),
+        viewRole("update"),
+        viewRole("skipped"),
+      ]),
+    ).toEqual({ importable: 2, installed: 1, update: 1, skipped: 1 });
+  });
+});
+
+describe("nameConflictSlugs / partialOffersRename (reason -> action)", () => {
+  it("only name-conflict skips become the transient overlay / offer rename", () => {
+    const skipped = [
+      { slug: "writer", name: "Writer", reason: "name-conflict" as const },
+      { slug: "editor", name: "Editor", reason: "already-installed" as const },
+    ];
+    expect(nameConflictSlugs(skipped)).toEqual(["writer"]);
+    expect(partialOffersRename(skipped)).toBe(true);
+  });
+
+  it("an already-installed-only skip is informational: no overlay, no rename", () => {
+    const skipped = [
+      { slug: "editor", name: "Editor", reason: "already-installed" as const },
+    ];
+    expect(nameConflictSlugs(skipped)).toEqual([]);
+    expect(partialOffersRename(skipped)).toBe(false);
+  });
+});
+
+describe("installedLangForRole", () => {
+  it("returns the other language when the same slug is installed elsewhere", () => {
+    const roles = [installedRole({ slug: "writer", language: "ru", version: 2 })];
+    expect(installedLangForRole("writer", roles, "en")).toBe("ru");
+  });
+
+  it("returns undefined when the same slug is installed in the SAME language", () => {
+    const roles = [installedRole({ slug: "writer", language: "en", version: 2 })];
+    expect(installedLangForRole("writer", roles, "en")).toBeUndefined();
+  });
+
+  it("returns undefined when no install of the slug exists", () => {
+    expect(installedLangForRole("writer", [], "en")).toBeUndefined();
+  });
+
+  it("ignores manually-created roles (no source)", () => {
+    const roles = [
+      installedRole({ slug: "writer", language: "ru", version: 2 }, {
+        source: null,
+      }),
+    ];
+    expect(installedLangForRole("writer", roles, "en")).toBeUndefined();
+  });
+});
+
+describe("mapCatalogRoleToView", () => {
+  it("no install -> import status, catalog version, emoji preserved", () => {
+    const view = mapCatalogRoleToView(catalogRole(), [], "en");
+    expect(view).toMatchObject({
+      slug: "writer",
+      emoji: "✍️",
+      name: "Writer",
+      description: "Drafts copy.",
+      status: "import",
+      version: 3,
+    });
+    expect(view.installedRoleId).toBeUndefined();
+    expect(view.installedLang).toBeUndefined();
+  });
+
+  it("import with the slug installed in another language -> installedLang set", () => {
+    const roles = [installedRole({ slug: "writer", language: "ru", version: 9 })];
+    const view = mapCatalogRoleToView(catalogRole(), roles, "en");
+    expect(view.status).toBe("import");
+    expect(view.installedLang).toBe("ru");
+  });
+
+  it("installed (up to date) -> installed status, catalog version, installedRoleId", () => {
+    const installed = installedRole({
+      slug: "writer",
+      language: "en",
+      version: 3,
+    });
+    const view = mapCatalogRoleToView(catalogRole(), [installed], "en");
+    expect(view).toMatchObject({
+      status: "installed",
+      version: 3,
+      installedRoleId: installed.id,
+    });
+  });
+
+  it("update -> version=from, newVersion=to, installedRoleId", () => {
+    const installed = installedRole({
+      slug: "writer",
+      language: "en",
+      version: 1,
+    });
+    const view = mapCatalogRoleToView(catalogRole(), [installed], "en");
+    expect(view).toMatchObject({
+      status: "update",
+      version: 1,
+      newVersion: 3,
+      installedRoleId: installed.id,
+    });
+  });
+
+  it("missing emoji -> emoji undefined; null description -> empty string", () => {
+    const view = mapCatalogRoleToView(
+      catalogRole({ emoji: null, description: null }),
+      [],
+      "en",
+    );
+    expect(view.emoji).toBeUndefined();
+    expect(view.description).toBe("");
+  });
+});
+
+describe("mapBundleRolesToView", () => {
+  it("maps a bundle's roles preserving order", () => {
+    const roles = [
+      catalogRole({ slug: "a", name: "A", version: 1 }),
+      catalogRole({ slug: "b", name: "B", version: 1 }),
+    ];
+    const installed = [installedRole({ slug: "a", language: "en", version: 1 })];
+    const view = mapBundleRolesToView(roles, installed, "en");
+    expect(view.map((r) => r.slug)).toEqual(["a", "b"]);
+    expect(view[0].status).toBe("installed");
+    expect(view[1].status).toBe("import");
+  });
+});

apps/client/src/features/ai-chat/utils/catalog-bundle-model.ts

@@ -0,0 +1,206 @@
+import type {
+  IAiRole,
+  IAiRoleCatalogRole,
+} from "@/features/ai-chat/types/ai-chat.types.ts";
+import { catalogRoleInstallState } from "@/features/ai-chat/utils/catalog-role-install-state.ts";
+
+/**
+ * The redesigned catalog modal renders bundles as cards with a summary status
+ * (readable without expanding) and a single primary action. The per-role and
+ * per-bundle view model that drives that UI is derived here as PURE functions so
+ * the mapping, the "installed in another language" hint, and the bundle-phase
+ * computation are unit-testable without mounting the component (mirrors the
+ * `catalogRoleInstallState` precedent).
+ */
+
+/**
+ * A role's status in the catalog view model.
+ *  - `import`    — not installed in the current content language.
+ *  - `installed` — installed and up to date.
+ *  - `update`    — installed, but the catalog ships a newer version.
+ *  - `skipped`   — TRANSIENT client-only status set after a conflicted import
+ *                  (a name collision under `conflict:'skip'`); never from the
+ *                  backend.
+ */
+export type RoleStatus = "import" | "installed" | "update" | "skipped";
+
+/** A catalog role mapped into the modal's view model. */
+export interface CatalogViewRole {
+  // Slug is the stable identity within a bundle; used as the row key and as the
+  // `slugs[]` payload for import.
+  slug: string;
+  // Optional in the catalog — the row reserves space and renders nothing when
+  // absent.
+  emoji?: string;
+  name: string;
+  description: string;
+  // For `installed`/`import`: the catalog version. For `update`: the installed
+  // (from) version, with `newVersion` holding the catalog (to) version.
+  version: number;
+  newVersion?: number;
+  status: RoleStatus;
+  // The language a same-slug role is installed under, when it differs from the
+  // current content language (drives the Р5 hint). Only set for `import` roles.
+  installedLang?: string;
+  // The workspace role id, present for `installed`/`update` — needed to call the
+  // update-from-catalog mutation.
+  installedRoleId?: string;
+}
+
+/**
+ * The summary phase of a bundle, derived from its roles' statuses. Determines
+ * the collapsed-header summary and the bundle's single primary action.
+ *  - `empty`        — the bundle has no roles.
+ *  - `allNew`       — everything is importable, nothing installed.
+ *  - `allInstalled` — everything installed & up to date; nothing else pending.
+ *  - `updates`      — updates available and nothing left to import.
+ *  - `mixed`        — any other combination.
+ */
+export type BundlePhase =
+  | "empty"
+  | "allNew"
+  | "allInstalled"
+  | "updates"
+  | "mixed";
+
+/** Per-status tallies for a bundle's roles (the single source of truth). */
+export interface BundleCounts {
+  importable: number;
+  installed: number;
+  update: number;
+  skipped: number;
+}
+
+/**
+ * Count a bundle's roles by status ONCE. Both `bundlePhase` and the panel derive
+ * from this, so the tally logic lives in exactly one place (no rescans / drift).
+ */
+export function bundleCounts(roles: CatalogViewRole[]): BundleCounts {
+  const counts: BundleCounts = {
+    importable: 0,
+    installed: 0,
+    update: 0,
+    skipped: 0,
+  };
+  for (const r of roles) {
+    if (r.status === "import") counts.importable += 1;
+    else if (r.status === "installed") counts.installed += 1;
+    else if (r.status === "update") counts.update += 1;
+    else if (r.status === "skipped") counts.skipped += 1;
+  }
+  return counts;
+}
+
+export function bundlePhase(roles: CatalogViewRole[]): BundlePhase {
+  if (roles.length === 0) return "empty";
+  const { importable, installed, update, skipped } = bundleCounts(roles);
+  // A `skipped` role is a pending post-import conflict (0 installed for it), so a
+  // bundle that has ANY skipped role is NOT "all installed & up to date" — that
+  // would make the collapsed green "up to date" header contradict the open
+  // panel's "Installed 0 · 1 skipped" plaque. It is `mixed` until resolved.
+  if (importable === 0 && update === 0 && skipped === 0) return "allInstalled";
+  if (update > 0 && importable === 0 && skipped === 0) return "updates";
+  if (importable > 0 && installed === 0 && update === 0 && skipped === 0)
+    return "allNew";
+  return "mixed";
+}
+
+/**
+ * The subset of a skip result that should be shown as a TRANSIENT `skipped`
+ * overlay in the bundle (so the row offers a re-import path). Only NAME-CONFLICT
+ * skips qualify: an `already-installed` skip (a concurrent-import race) has
+ * nothing to act on — re-importing the same slug would just skip again — so it
+ * must NOT be overlaid (else the row shows a misleading "Rename & install" that
+ * self-heals into a false "installed"). Pure so both reason branches are tested.
+ */
+export function nameConflictSlugs(
+  skipped: { slug: string; reason: "name-conflict" | "already-installed" }[],
+): string[] {
+  return skipped
+    .filter((s) => s.reason === "name-conflict")
+    .map((s) => s.slug);
+}
+
+/**
+ * Whether a partial-import result should offer the "Rename & install" action:
+ * only when at least one skip is a name conflict (renameable). An
+ * `already-installed`-only partial is informational.
+ */
+export function partialOffersRename(
+  skipped: { reason: "name-conflict" | "already-installed" }[],
+): boolean {
+  return skipped.some((s) => s.reason === "name-conflict");
+}
+
+/**
+ * For a role NOT installed in the current `language`, find a workspace role with
+ * the same catalog `slug` installed under a DIFFERENT language, and return that
+ * language. Drives the "installed in another language" hint (Р5): a different
+ * language of the same slug is a separate install and appears as `import`.
+ */
+export function installedLangForRole(
+  slug: string,
+  workspaceRoles: IAiRole[],
+  language: string,
+): string | undefined {
+  const other = workspaceRoles.find(
+    (r) =>
+      r.source?.slug === slug &&
+      !!r.source?.language &&
+      r.source.language !== language,
+  );
+  return other?.source?.language;
+}
+
+/**
+ * Map one catalog role to the view model, computing its install status against
+ * the workspace roles (via `catalogRoleInstallState`) and, for importable roles,
+ * the other-language hint.
+ */
+export function mapCatalogRoleToView(
+  role: IAiRoleCatalogRole,
+  workspaceRoles: IAiRole[],
+  language: string,
+): CatalogViewRole {
+  const state = catalogRoleInstallState(role, workspaceRoles, language);
+  const base = {
+    slug: role.slug,
+    emoji: role.emoji ?? undefined,
+    name: role.name,
+    description: role.description ?? "",
+  };
+  if (state.state === "update") {
+    return {
+      ...base,
+      status: "update",
+      version: state.fromVersion,
+      newVersion: state.toVersion,
+      installedRoleId: state.installed.id,
+    };
+  }
+  if (state.state === "installed") {
+    return {
+      ...base,
+      status: "installed",
+      version: role.version,
+      installedRoleId: state.installed.id,
+    };
+  }
+  return {
+    ...base,
+    status: "import",
+    version: role.version,
+    installedLang: installedLangForRole(role.slug, workspaceRoles, language),
+  };
+}
+
+/**
+ * Map a whole bundle's catalog roles to the view model, preserving order.
+ */
+export function mapBundleRolesToView(
+  roles: IAiRoleCatalogRole[],
+  workspaceRoles: IAiRole[],
+  language: string,
+): CatalogViewRole[] {
+  return roles.map((r) => mapCatalogRoleToView(r, workspaceRoles, language));
+}

apps/client/src/features/ai-chat/utils/collapse-blank-lines.test.ts

@@ -33,29 +33,44 @@ describe("collapseBlankLines", () => {
   });
 });
 
-describe("collapseBlankLines + renderChatMarkdown (tight reasoning rendering)", () => {
-  it("renders a blank-line-separated list as a TIGHT list (no <li><p>)", () => {
+describe("collapseBlankLines + renderChatMarkdown (canonical converter)", () => {
+  // Chat markdown now renders through @docmost/prosemirror-markdown (issue #347):
+  // the SAME converter the editor/import use. Its list items are schema-shaped —
+  // each <li>'s content is wrapped in a <p> (listItem content is `paragraph+`) —
+  // so the HTML always carries `<li><p>…</p></li>` regardless of blank-line
+  // looseness in the source (the converter has no tight/loose distinction). The
+  // visual tightness that `collapseBlankLines` used to buy is now provided by
+  // CSS (`.markdown li p { margin: 0 }`), not the HTML shape.
+  it("renders a blank-line-separated bullet list as a real <ul> list", () => {
     const loose =
       "Intro paragraph.\n\n- item one\n\n- item two\n\n- item three";
     const html = renderChatMarkdown(collapseBlankLines(loose), {});
-    // Tight list: each <li> holds the text directly, not wrapped in a <p>.
-    expect(html).toContain("<li>item one</li>");
-    expect(html).not.toContain("<li><p>");
-    // The list still parses as a list after the paragraph (not a paragraph+<br>).
+    // Clean, un-namespaced HTML (DOMSerializer, not XMLSerializer) — no xmlns.
     expect(html).toContain("<ul>");
+    expect(html).not.toMatch(/<ul[^>]*xmlns/);
+    // The item text is present (inside the schema's <li><p> wrapper).
+    expect(html).toContain("item one");
+    // The intro paragraph renders as its own paragraph before the list.
     expect(html).toContain("<p>Intro paragraph.</p>");
   });
 
-  it("renders an ordered list (1. 2.) as tight after collapsing", () => {
+  it("renders an ordered list (1. 2.) as a real <ol> list", () => {
     const loose = "Intro.\n\n1. first\n\n2. second";
     const html = renderChatMarkdown(collapseBlankLines(loose), {});
     expect(html).toContain("<ol>");
-    expect(html).toContain("<li>first</li>");
-    expect(html).not.toContain("<li><p>");
+    expect(html).not.toMatch(/<ol[^>]*xmlns/);
+    expect(html).toContain("first");
+    expect(html).toContain("second");
   });
 
-  it("the loose source WOULD render <li><p> without collapsing (control)", () => {
+  it("wraps list-item content in <p> (schema shape; tightness is CSS)", () => {
+    // The canonical converter always wraps a list item's content in a paragraph,
+    // whether or not the source had blank lines between items.
     const loose = "- a\n\n- b";
     expect(renderChatMarkdown(loose, {})).toContain("<li><p>");
+    // And a "tight" source produces the identical wrapping (no distinction).
+    expect(renderChatMarkdown(collapseBlankLines(loose), {})).toContain(
+      "<li><p>",
+    );
   });
 });

apps/client/src/features/ai-chat/utils/error-message.test.ts

@@ -23,6 +23,25 @@ describe("describeChatError", () => {
     });
   });
 
+  it("classifies an A_RUN_BEGIN_FAILED 503 as a temporary run-start failure, NOT provider-not-configured (#486)", () => {
+    // The FULL real body the server writes for a beginRun failure: a
+    // ServiceUnavailableException(object) whose response is serialized verbatim
+    // onto the raw socket, self-describing statusCode 503 + the run-start code.
+    const body =
+      '{"message":"Could not start the agent run. This is usually temporary — please try again.","code":"A_RUN_BEGIN_FAILED","statusCode":503}';
+    expect(describeChatError(body, t)).toEqual({
+      title: "Could not start the run",
+      detail:
+        "The agent run could not be started. This is usually temporary — please try again.",
+    });
+    // ORDER GUARD: even though the body ALSO carries statusCode 503 (which the
+    // generic branch matches), the A_RUN_BEGIN_FAILED branch runs first, so it is
+    // never mislabeled "AI provider not configured".
+    expect(describeChatError(body, t).title).not.toBe(
+      "AI provider not configured",
+    );
+  });
+
   it("classifies a dropped connection (ECONNRESET) as a lost-connection error", () => {
     expect(
       describeChatError("Cannot connect to API: read ECONNRESET", t).title,

apps/client/src/features/ai-chat/utils/error-message.ts

@@ -24,6 +24,21 @@ export function describeChatError(
 ): ChatErrorView {
   const msg = message ?? "";
 
+  // Our own "could not start the run" gate (A_RUN_BEGIN_FAILED, #486): a 503
+  // whose body carries this code is a TEMPORARY server-side failure while
+  // starting the run (e.g. a DB-pool blip), NOT an unconfigured provider. It MUST
+  // be matched STRICTLY BEFORE the generic 503 branch below, which would
+  // otherwise mislabel it "The AI provider is not configured" and tell the user
+  // to call an admin instead of just retrying.
+  if (/"code"\s*:\s*"A_RUN_BEGIN_FAILED"/.test(msg)) {
+    return {
+      title: t("Could not start the run"),
+      detail: t(
+        "The agent run could not be started. This is usually temporary — please try again.",
+      ),
+    };
+  }
+
   if (/"statusCode"\s*:\s*403\b/.test(msg)) {
     return {
       title: t("AI chat is disabled"),

apps/client/src/features/ai-chat/utils/markdown.ts

@@ -1,6 +1,37 @@
-import { markdownToHtml } from "@docmost/editor-ext";
+import {
+  markdownToProseMirrorSync,
+  docmostExtensions,
+} from "@docmost/prosemirror-markdown/browser";
+import { getSchema } from "@tiptap/core";
+import { Node as PMNode, DOMSerializer } from "@tiptap/pm/model";
 import DOMPurify from "dompurify";
 
+// The Docmost editor schema, built once. Chat markdown is rendered through the
+// SAME schema the editor/import use (issue #347), so chat output matches how the
+// page would render the same markdown.
+const chatSchema = getSchema(docmostExtensions);
+
+/**
+ * Markdown -> HTML for chat display, via the canonical converter. We serialize
+ * the ProseMirror doc with `DOMSerializer` into a real element and read its
+ * `innerHTML` (rather than `@tiptap/html`'s `generateHTML`, whose browser path
+ * uses `XMLSerializer` and stamps a `xmlns` on every block) so the markup is
+ * clean HTML. `li > p` wrapping is inherent to the schema (listItem content is
+ * `paragraph+`); the chat CSS zeroes those paragraph margins so lists still
+ * render tight.
+ */
+function markdownToChatHtml(markdown: string): string {
+  const doc = markdownToProseMirrorSync(markdown);
+  const node = PMNode.fromJSON(chatSchema, doc);
+  const div = document.createElement("div");
+  DOMSerializer.fromSchema(chatSchema).serializeFragment(
+    node.content,
+    { document },
+    div,
+  );
+  return div.innerHTML;
+}
+
 export interface RenderChatMarkdownOptions {
   /**
    * Neutralize INTERNAL links so they render as inert text (no `href`/`target`).
@@ -63,22 +94,32 @@ function neutralizeInternalLinksHook(node: Element): void {
 
 /**
  * Render AI markdown to sanitized HTML for read-only display. We reuse the
- * app's `markdownToHtml` (the same `marked` pipeline used for paste/import) so
- * chat output matches the editor's markdown flavor, then sanitize with
- * DOMPurify — LLM output is untrusted, so it must never reach the DOM unsanitized.
+ * canonical converter (issue #347): markdown -> ProseMirror JSON (the SAME
+ * `markdownToProseMirrorSync` the editor paste/import path uses, so chat output
+ * matches the editor's markdown flavor) -> HTML via `markdownToChatHtml`
+ * (DOMSerializer), then sanitize with DOMPurify — LLM output is untrusted, so it
+ * must never reach the DOM unsanitized.
  *
- * `markdownToHtml` can return `string | Promise<string>` (it has async marked
- * extensions registered). In practice plain chat markdown resolves
- * synchronously, but we guard the Promise case by returning a safe empty string
- * for that branch (the caller renders the raw text fallback instead).
+ * Stays SYNCHRONOUS: both callers render inside React (a memo and a useMemo),
+ * so the whole pipeline must resolve without awaiting. The converter's sync
+ * entry makes that possible; on any conversion error we return "" so the caller
+ * falls back to raw text (the same fallback the old Promise-guard produced).
  */
 export function renderChatMarkdown(
   markdown: string,
   options: RenderChatMarkdownOptions = {},
 ): string {
   if (!markdown) return "";
-  const html = markdownToHtml(markdown);
-  if (typeof html !== "string") return "";
+  let html: string;
+  try {
+    // markdown -> canonical PM JSON -> HTML (native DOMParser in the browser;
+    // jsdom is never bundled — see @docmost/prosemirror-markdown/browser).
+    html = markdownToChatHtml(markdown);
+  } catch {
+    // Malformed/unsupported markdown must not crash the chat render; fall back
+    // to raw text (empty return -> caller shows the plain-text branch).
+    return "";
+  }
 
   if (!options.neutralizeInternalLinks) {
     // Internal chat: unchanged behavior, no hook registered.

apps/client/src/features/ai-chat/utils/resume-helpers.test.ts

@@ -0,0 +1,112 @@
+import { describe, it, expect } from "vitest";
+import type { UIMessage } from "@ai-sdk/react";
+import type { IAiChatMessageRow } from "@/features/ai-chat/types/ai-chat.types.ts";
+import {
+  isStreamingTail,
+  isSettledAssistantTail,
+  seedRows,
+  mergeById,
+} from "./resume-helpers.ts";
+
+function row(
+  id: string,
+  role: string,
+  status?: string,
+): IAiChatMessageRow {
+  return { id, role, content: "", status, createdAt: "2026-01-01T00:00:00Z" };
+}
+
+function makeMsg(id: string, text: string): UIMessage {
+  return {
+    id,
+    role: "assistant",
+    parts: [{ type: "text", text }],
+  } as UIMessage;
+}
+
+describe("isStreamingTail", () => {
+  it("is true when the last row is a streaming assistant row", () => {
+    expect(
+      isStreamingTail([row("u1", "user"), row("a1", "assistant", "streaming")]),
+    ).toBe(true);
+  });
+
+  it("is false for a settled assistant tail", () => {
+    expect(isStreamingTail([row("a1", "assistant", "succeeded")])).toBe(false);
+    expect(isStreamingTail([row("a1", "assistant")])).toBe(false);
+  });
+
+  it("is false when the tail is a user row or the list is empty", () => {
+    expect(isStreamingTail([row("u1", "user")])).toBe(false);
+    expect(isStreamingTail([])).toBe(false);
+  });
+});
+
+describe("isSettledAssistantTail", () => {
+  it("is true for an assistant tail whose status is not streaming", () => {
+    expect(isSettledAssistantTail([row("a1", "assistant", "succeeded")])).toBe(
+      true,
+    );
+    expect(isSettledAssistantTail([row("a1", "assistant")])).toBe(true);
+    expect(isSettledAssistantTail([row("a1", "assistant", "aborted")])).toBe(
+      true,
+    );
+  });
+
+  it("is false for a streaming assistant tail", () => {
+    expect(isSettledAssistantTail([row("a1", "assistant", "streaming")])).toBe(
+      false,
+    );
+  });
+
+  it("is false when the tail is a user row or the list is empty", () => {
+    expect(isSettledAssistantTail([row("u1", "user")])).toBe(false);
+    expect(isSettledAssistantTail([])).toBe(false);
+  });
+});
+
+describe("seedRows", () => {
+  const rows = [row("u1", "user"), row("a1", "assistant", "streaming")];
+
+  it("returns the rows unchanged when not stripping", () => {
+    expect(seedRows(rows, false)).toBe(rows);
+  });
+
+  it("drops the last row when stripping", () => {
+    const seeded = seedRows(rows, true);
+    expect(seeded).toHaveLength(1);
+    expect(seeded[0].id).toBe("u1");
+  });
+
+  it("returns an empty list when stripping a single-row list", () => {
+    expect(seedRows([row("a1", "assistant", "streaming")], true)).toHaveLength(
+      0,
+    );
+  });
+});
+
+describe("mergeById", () => {
+  it("replaces the message with the same id in place (per-step growth)", () => {
+    const prev = [makeMsg("u1", "hi"), makeMsg("a1", "step 1")];
+    const incoming = makeMsg("a1", "step 1\nstep 2");
+    const next = mergeById(prev, incoming);
+    expect(next).toHaveLength(2);
+    expect(next[1]).toBe(incoming);
+    expect(next[0]).toBe(prev[0]); // untouched
+    expect(next).not.toBe(prev); // new array (never mutates input)
+  });
+
+  it("appends when the incoming message is not yet present", () => {
+    const prev = [makeMsg("u1", "hi")];
+    const incoming = makeMsg("a1", "first token");
+    const next = mergeById(prev, incoming);
+    expect(next).toHaveLength(2);
+    expect(next[1]).toBe(incoming);
+  });
+
+  it("returns the original list unchanged when there is nothing to merge", () => {
+    const prev = [makeMsg("u1", "hi")];
+    expect(mergeById(prev, null)).toBe(prev);
+    expect(mergeById(prev, undefined)).toBe(prev);
+  });
+});

apps/client/src/features/ai-chat/utils/resume-helpers.ts

@@ -0,0 +1,62 @@
+import type { UIMessage } from "@ai-sdk/react";
+import type { IAiChatMessageRow } from "@/features/ai-chat/types/ai-chat.types.ts";
+
+/**
+ * Pure decisions for the resumable-SSE resume machinery (#184 phase 1.5). A tab
+ * that reopens a chat whose agent run is still going attaches to the server's
+ * run-stream registry (replay + live tail) instead of polling snapshots; these
+ * small predicates decide WHICH tail is safe to resume and how to seed the store,
+ * extracted so they can be unit-tested in isolation.
+ */
+
+/**
+ * A STREAMING tail: the last persisted row is an assistant row still marked
+ * `status === 'streaming'`. Such a tail is stripped from the seed and rebuilt by
+ * the replay (`expect=live`), since the SDK's `text-start` always pushes a new
+ * part and replaying over a seeded in-progress row would duplicate its text.
+ */
+export function isStreamingTail(rows: IAiChatMessageRow[]): boolean {
+  const tail = rows[rows.length - 1];
+  return !!tail && tail.role === "assistant" && tail.status === "streaming";
+}
+
+/**
+ * A SETTLED assistant tail: the last row is an assistant row whose status is
+ * anything OTHER than 'streaming'. A settled assistant tail must NEVER resume —
+ * replaying a finished run into a store that already holds its message duplicates
+ * parts (`text-start` always pushes a new part).
+ */
+export function isSettledAssistantTail(rows: IAiChatMessageRow[]): boolean {
+  const tail = rows[rows.length - 1];
+  return !!tail && tail.role === "assistant" && tail.status !== "streaming";
+}
+
+/**
+ * Seed rows for `useChat`: return the rows unchanged, or without the last row when
+ * `strip` is set (the streaming tail is stripped so the live replay rebuilds it
+ * without duplicating parts).
+ */
+export function seedRows(
+  rows: IAiChatMessageRow[],
+  strip: boolean,
+): IAiChatMessageRow[] {
+  return strip ? rows.slice(0, -1) : rows;
+}
+
+/**
+ * Merge an assistant message into the rendered list by id: replace the message
+ * with the same id in place (the in-progress assistant row is already seeded from
+ * history, so per-step growth replaces it), or append it when absent. Returns a
+ * new array; the input is never mutated.
+ */
+export function mergeById(
+  messages: UIMessage[],
+  incoming: UIMessage | null | undefined,
+): UIMessage[] {
+  if (!incoming) return messages;
+  const idx = messages.findIndex((m) => m.id === incoming.id);
+  if (idx === -1) return [...messages, incoming];
+  const next = messages.slice();
+  next[idx] = incoming;
+  return next;
+}

apps/client/src/features/ai-chat/utils/tool-parts.test.tsx

@@ -1,6 +1,7 @@
 import { describe, it, expect } from "vitest";
 import {
   toolCitations,
+  toolInputSummary,
   toolRunState,
   type ToolUiPart,
 } from "./tool-parts";
@@ -77,6 +78,138 @@ describe("toolCitations", () => {
   });
 });
 
+describe("toolInputSummary", () => {
+  it("returns the primary `query` string", () => {
+    const part: ToolUiPart = {
+      type: "tool-Search_web_search",
+      state: "input-available",
+      input: { query: "hello world" },
+    };
+    expect(toolInputSummary(part)).toBe("hello world");
+  });
+
+  it("summarizes a primary array field with a (+N) suffix", () => {
+    // `urls` is an external MCP read_pages-style list; the first element plus a
+    // count of the rest.
+    const part: ToolUiPart = {
+      type: "tool-read_pages",
+      state: "input-available",
+      input: { urls: ["a", "b", "c"] },
+    };
+    expect(toolInputSummary(part)).toBe("a (+2)");
+  });
+
+  it("omits the (+N) suffix for a single-element array", () => {
+    const part: ToolUiPart = {
+      type: "tool-read_pages",
+      state: "input-available",
+      input: { urls: ["only"] },
+    };
+    expect(toolInputSummary(part)).toBe("only");
+  });
+
+  it("falls back to `title` for a page op with no query", () => {
+    const part: ToolUiPart = {
+      type: "tool-createPage",
+      state: "input-available",
+      input: { pageId: "x", title: "My Page" },
+    };
+    expect(toolInputSummary(part)).toBe("My Page");
+  });
+
+  it("prefers the earlier primary field when several are present", () => {
+    const part: ToolUiPart = {
+      type: "tool-x",
+      state: "input-available",
+      // `query` outranks `title` in PRIMARY_INPUT_FIELDS — the ordered list is
+      // the contract, so a reordering must break this test.
+      input: { query: "Q", title: "T" },
+    };
+    expect(toolInputSummary(part)).toBe("Q");
+  });
+
+  it("does not clamp a value exactly at the 140-char limit", () => {
+    const exact = "a".repeat(140);
+    const part: ToolUiPart = {
+      type: "tool-Search_web_search",
+      state: "input-available",
+      input: { query: exact },
+    };
+    const out = toolInputSummary(part)!;
+    expect(out).toBe(exact);
+    expect(out.endsWith("…")).toBe(false);
+    expect(out.length).toBe(140);
+  });
+
+  it("clamps one char over the limit (141 -> 140 + ellipsis)", () => {
+    const part: ToolUiPart = {
+      type: "tool-Search_web_search",
+      state: "input-available",
+      input: { query: "a".repeat(141) },
+    };
+    const out = toolInputSummary(part)!;
+    expect(out.endsWith("…")).toBe(true);
+    expect(out.length).toBe(141);
+    expect(out).toBe("a".repeat(140) + "…");
+  });
+
+  it("clamps a long value to ~140 chars with an ellipsis", () => {
+    const long = "a".repeat(300);
+    const part: ToolUiPart = {
+      type: "tool-Search_web_search",
+      state: "input-available",
+      input: { query: long },
+    };
+    const out = toolInputSummary(part)!;
+    expect(out.endsWith("…")).toBe(true);
+    expect(out.length).toBeLessThanOrEqual(141);
+  });
+
+  it("collapses newlines and repeated spaces to single spaces", () => {
+    const part: ToolUiPart = {
+      type: "tool-Search_web_search",
+      state: "input-available",
+      input: { query: "  foo\n\n  bar   baz  " },
+    };
+    expect(toolInputSummary(part)).toBe("foo bar baz");
+  });
+
+  it("returns undefined with no input", () => {
+    expect(
+      toolInputSummary({ type: "tool-x", state: "input-available" }),
+    ).toBeUndefined();
+  });
+
+  it("returns undefined for an empty object input", () => {
+    expect(
+      toolInputSummary({
+        type: "tool-x",
+        state: "input-available",
+        input: {},
+      }),
+    ).toBeUndefined();
+  });
+
+  it("returns undefined for a non-object input", () => {
+    expect(
+      toolInputSummary({
+        type: "tool-x",
+        state: "input-available",
+        input: "just a string",
+      }),
+    ).toBeUndefined();
+  });
+
+  it("returns undefined while the input is still streaming (even with a full input)", () => {
+    const part: ToolUiPart = {
+      type: "tool-Search_web_search",
+      state: "input-streaming",
+      input: { query: "hello world" },
+    };
+    expect(toolInputSummary(part)).toBeUndefined();
+  });
+});
+
 describe("toolRunState", () => {
   it('maps "output-error" to error', () => {
     expect(toolRunState("output-error")).toBe("error");

apps/client/src/features/ai-chat/utils/tool-parts.tsx

@@ -97,6 +97,69 @@ function asString(value: unknown): string | undefined {
   return typeof value === "string" && value.length > 0 ? value : undefined;
 }
 
+/** Collapse runs of whitespace/newlines to a single space and trim. */
+function collapse(s: string): string {
+  return s.replace(/\s+/g, " ").trim();
+}
+
+/** Truncate to ~140 chars, appending an ellipsis when it overflows. */
+function clamp(s: string): string {
+  const MAX = 140;
+  return s.length > MAX ? s.slice(0, MAX).trimEnd() + "…" : s;
+}
+
+/**
+ * Priority "primary" argument fields, in order. The first present one supplies
+ * the summary. `urls` is included (external MCP `read_pages`-style tools take a
+ * list of URLs) and is handled as an array; `url` covers the single-URL form.
+ */
+const PRIMARY_INPUT_FIELDS = [
+  "query",
+  "q",
+  "searchQuery",
+  "url",
+  "urls",
+  "title",
+  "name",
+  "text",
+  "prompt",
+] as const;
+
+/**
+ * A short, PLAIN-TEXT one-line summary of a tool call's arguments (e.g. the
+ * search query), or undefined when no recognizable primary field is present.
+ * Rendered under the tool label so tools without a friendly name (external MCP
+ * tools like `Search_web_search`) still show WHAT was requested, not just a
+ * generic "Ran tool {{name}}". The returned string is plain text and MUST be
+ * rendered React-escaped (Mantine `<Text>`), never as markdown/HTML.
+ *
+ * Streaming gate: while `state === "input-streaming"` the `input` object grows
+ * chunk by chunk but `messageSignature` deliberately does NOT track `input`, so
+ * a live summary computed here would freeze at its first captured value and go
+ * stale. We therefore return undefined until the state flips to
+ * `input-available` (input finalized) — that state change IS tracked by the
+ * signature, so the row re-renders and shows the complete summary. Do NOT add
+ * `input` to `message-signature.ts` to work around this.
+ */
+export function toolInputSummary(part: ToolUiPart): string | undefined {
+  if (part.state === "input-streaming") return undefined;
+  if (!part.input || typeof part.input !== "object") return undefined;
+  const input = part.input as Record<string, unknown>;
+
+  for (const field of PRIMARY_INPUT_FIELDS) {
+    const value = input[field];
+    if (typeof value === "string" && value.length > 0) {
+      return clamp(collapse(value));
+    }
+    if (Array.isArray(value) && value.length > 0) {
+      const first = collapse(String(value[0]));
+      if (first.length === 0) continue;
+      return clamp(first + (value.length > 1 ? ` (+${value.length - 1})` : ""));
+    }
+  }
+  return undefined;
+}
+
 /**
  * Resolve the page citation(s) a tool part references, from its input/output.
  * Only output-available parts (the tool returned) yield citations. Search

apps/client/src/features/comment/components/comment-content-view.test.tsx

@@ -15,6 +15,7 @@ vi.mock("@/features/comment/components/comment-editor", () => ({
 // case renders in isolation.
 vi.mock("@/features/page/queries/page-query.ts", () => ({
   usePageQuery: () => ({ data: undefined, isLoading: false, isError: false }),
+  usePageMetaQuery: () => ({ data: undefined, isLoading: false, isError: false }),
 }));
 vi.mock("@/features/share/queries/share-query.ts", () => ({
   useSharePageQuery: () => ({ data: undefined }),

apps/client/src/features/comment/components/comment-list-with-tabs.tsx

@@ -22,7 +22,7 @@ import CommentEditor from "@/features/comment/components/comment-editor";
 import CommentActions from "@/features/comment/components/comment-actions";
 import { useFocusWithin } from "@mantine/hooks";
 import { IComment } from "@/features/comment/types/comment.types.ts";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
 import { extractPageSlugId } from "@/lib";
 import { useTranslation } from "react-i18next";
 import { useGetSpaceBySlugQuery } from "@/features/space/queries/space-query.ts";
@@ -56,7 +56,7 @@ export function buildChildrenByParent(
 function CommentListWithTabs({ onClose }: CommentListWithTabsProps) {
   const { t } = useTranslation();
   const { pageSlug } = useParams();
-  const { data: page } = usePageQuery({ pageId: extractPageSlugId(pageSlug) });
+  const { data: page } = usePageMetaQuery({ pageId: extractPageSlugId(pageSlug) });
   const {
     data: comments,
     isLoading: isCommentsLoading,

apps/client/src/features/editor/atoms/editor-atoms.ts

@@ -1,5 +1,8 @@
 import { atom } from "jotai";
-import { Editor } from "@tiptap/core";
+// Type-only: these atoms only hold an Editor reference for typing. A value
+// import would drag the whole @tiptap/core engine into the eager graph of every
+// shell component that reads one of these atoms.
+import type { Editor } from "@tiptap/core";
 import { PageEditMode } from "@/features/user/types/user.types.ts";
 import type { DictationUnavailableReason } from "@/features/dictation/dictation-status";
 

apps/client/src/features/editor/components/audio/audio-menu.tsx

@@ -46,6 +46,13 @@ export function AudioMenu({ editor }: EditorMenuProps) {
         return null;
       }
 
+      // #343 PART 1: skip getAttributes unless an audio node is active. The menu
+      // only shows for an active audio node (shouldShow), so the null state while
+      // inactive is never rendered — behavior unchanged.
+      if (!ctx.editor.isActive("audio")) {
+        return null;
+      }
+
       const audioAttrs = ctx.editor.getAttributes("audio");
 
       return {

apps/client/src/features/editor/components/callout/callout-menu.tsx

@@ -43,8 +43,15 @@ export function CalloutMenu({ editor }: EditorMenuProps) {
         return null;
       }
 
+      // #343 PART 1: skip the per-type isActive() probes unless a callout is
+      // active. The menu only shows for an active callout (shouldShow), so the
+      // null state while inactive is never rendered — behavior unchanged.
+      if (!ctx.editor.isActive("callout")) {
+        return null;
+      }
+
       return {
-        isCallout: ctx.editor.isActive("callout"),
+        isCallout: true,
         isInfo: ctx.editor.isActive("callout", { type: "info" }),
         isNote: ctx.editor.isActive("callout", { type: "note" }),
         isSuccess: ctx.editor.isActive("callout", { type: "success" }),

apps/client/src/features/editor/components/code-block/code-block-view.tsx

@@ -22,6 +22,12 @@ export default function CodeBlockView(props: NodeViewProps) {
   const [isSelected, setIsSelected] = useState(false);
 
   useEffect(() => {
+    // #343 PART 6: `isSelected` only drives the mermaid source's visibility (the
+    // `hidden` prop below). For every non-mermaid code block it is never read,
+    // so skip the per-block `selectionUpdate` listener entirely — otherwise N
+    // code blocks each add a global listener + a setState on every caret move.
+    if (language !== "mermaid") return;
+
     const updateSelection = () => {
       const { state } = editor;
       const { from, to } = state.selection;
@@ -32,11 +38,14 @@ export default function CodeBlockView(props: NodeViewProps) {
       setIsSelected(isNodeSelected);
     };
 
+    // Initialize on attach so switching a block's language to "mermaid" reflects
+    // the current selection immediately (the listener was not running before).
+    updateSelection();
     editor.on("selectionUpdate", updateSelection);
     return () => {
       editor.off("selectionUpdate", updateSelection);
     };
-  }, [editor, getPos(), node.nodeSize]);
+  }, [editor, getPos(), node.nodeSize, language]);
 
   function changeLanguage(language: string) {
     setLanguageValue(language);

apps/client/src/features/editor/components/drawio/drawio-menu-lazy.tsx

@@ -0,0 +1,16 @@
+import { lazy, Suspense } from "react";
+import { EditorMenuProps } from "@/features/editor/components/table/types/types.ts";
+
+// Lazily load the drawio bubble menu so it is split out of the editor chunk and
+// fetched only when an editable editor is mounted (mirrors excalidraw-menu-lazy).
+const DrawioMenu = lazy(
+  () => import("@/features/editor/components/drawio/drawio-menu.tsx"),
+);
+
+export default function DrawioMenuLazy(props: EditorMenuProps) {
+  return (
+    <Suspense fallback={null}>
+      <DrawioMenu {...props} />
+    </Suspense>
+  );
+}

apps/client/src/features/editor/components/drawio/drawio-view-lazy.tsx

@@ -0,0 +1,17 @@
+import { lazy, Suspense } from "react";
+import { NodeViewProps } from "@tiptap/react";
+
+// Lazily load the drawio node view so the heavy react-drawio embed runtime is
+// split into its own chunk and fetched only when a drawio diagram is actually
+// rendered (mirrors excalidraw-view-lazy).
+const DrawioView = lazy(
+  () => import("@/features/editor/components/drawio/drawio-view.tsx"),
+);
+
+export default function DrawioViewLazy(props: NodeViewProps) {
+  return (
+    <Suspense fallback={null}>
+      <DrawioView {...props} />
+    </Suspense>
+  );
+}

apps/client/src/features/editor/components/fixed-toolbar/use-toolbar-state.ts

@@ -1,5 +1,7 @@
 import type { Editor } from "@tiptap/react";
 import { useEditorState } from "@tiptap/react";
+import { undoDepth, redoDepth } from "@tiptap/pm/history";
+import { yUndoPluginKey } from "@tiptap/y-tiptap";
 
 export interface ToolbarState {
   isBold: boolean;
@@ -16,14 +18,45 @@ export interface ToolbarState {
   canRedo: boolean;
 }
 
-// Undo/redo come from either StarterKit's history or the Yjs collaboration
-// history extension. During the brief moment a page is rendered with the
-// static editor (mainExtensions only, undoRedo disabled), neither is loaded
-// and editor.can().undo/redo is undefined.
-function safeCan(editor: Editor, command: "undo" | "redo"): boolean {
-  const can = editor.can() as Record<string, unknown>;
-  const fn = can[command];
-  return typeof fn === "function" ? (fn as () => boolean)() : false;
+// Undo/redo availability, computed WITHOUT `editor.can().undo()/.redo()`.
+//
+// `editor.can()` runs the command as a dry-run (building a throwaway state +
+// transaction) — the most expensive work in this selector, and it ran on every
+// keystroke (and every REMOTE keystroke under collaboration). Instead we read
+// the history stack depth directly, which is a cheap plugin-state lookup and
+// mirrors exactly what the undo/redo commands themselves check:
+//
+//  - Collaboration (Yjs): the yjs UndoManager's undo/redo stack lengths — the
+//    same `undoStack.length === 0` / `redoStack.length === 0` guard the
+//    Collaboration extension's undo/redo commands use.
+//  - Plain history (templates / non-collab): prosemirror-history's undoDepth /
+//    redoDepth, which back the UndoRedo extension.
+//
+// When neither history backend is installed (the pre-sync static editor —
+// mainExtensions only, undoRedo disabled), both fall through to 0 -> false,
+// matching the previous `safeCan` behavior.
+function historyAvailability(editor: Editor): {
+  canUndo: boolean;
+  canRedo: boolean;
+} {
+  const state = editor.state;
+
+  // Collaboration history (Yjs) takes precedence when present.
+  const yState = yUndoPluginKey.getState(state) as
+    | { undoManager?: { undoStack: unknown[]; redoStack: unknown[] } }
+    | undefined;
+  if (yState?.undoManager) {
+    return {
+      canUndo: yState.undoManager.undoStack.length > 0,
+      canRedo: yState.undoManager.redoStack.length > 0,
+    };
+  }
+
+  // Plain prosemirror-history (returns 0 when the history plugin is absent).
+  return {
+    canUndo: undoDepth(state) > 0,
+    canRedo: redoDepth(state) > 0,
+  };
 }
 
 export function useToolbarState(editor: Editor | null): ToolbarState | null {
@@ -31,6 +64,7 @@ export function useToolbarState(editor: Editor | null): ToolbarState | null {
     editor,
     selector: (ctx) => {
       if (!ctx.editor) return null;
+      const { canUndo, canRedo } = historyAvailability(ctx.editor);
       return {
         isBold: ctx.editor.isActive("bold"),
         isItalic: ctx.editor.isActive("italic"),
@@ -42,8 +76,8 @@ export function useToolbarState(editor: Editor | null): ToolbarState | null {
         isBulletList: ctx.editor.isActive("bulletList"),
         isOrderedList: ctx.editor.isActive("orderedList"),
         isTaskList: ctx.editor.isActive("taskList"),
-        canUndo: safeCan(ctx.editor, "undo"),
-        canRedo: safeCan(ctx.editor, "redo"),
+        canUndo,
+        canRedo,
       };
     },
   });

apps/client/src/features/editor/components/footnote/footnote-definition-view.tsx

@@ -49,19 +49,14 @@ export default function FootnoteDefinitionView(props: NodeViewProps) {
       className={classes.definition}
       style={{ ["--footnote-number" as any]: `"${number}"` }}
     >
-      {/* #146: contentDOM MUST be the first child — a non-editable marker before
+      {/* #146: contentDOM MUST be the first child — non-editable chrome before
           it makes click hit-testing snap the caret above. Content first; the
-          marker + back-link follow in DOM and are placed left/right via CSS
-          flex `order`. The second #146 mitigation lives in
+          back-link follows in DOM and is placed on the right via CSS flex. The
+          decorative "N." number is rendered inline via the .definitionContent
+          ::before rule (from the --footnote-number var), so no marker element
+          precedes the content. The second #146 mitigation lives in
           editor-paste-handler.tsx (reflowAfterPaste). */}
       <NodeViewContent className={classes.definitionContent} />
-      <span
-        className={classes.definitionMarker}
-        contentEditable={false}
-        aria-hidden="true"
-      >
-        {number}.
-      </span>
       {refCount > 1 ? (
         // Multiple references -> ↩ followed by one lettered link per occurrence.
         <span

apps/client/src/features/editor/components/footnote/footnote.module.css

@@ -81,34 +81,34 @@
 .definition {
   display: flex;
   align-items: flex-start;
-  /* Tight number→text spacing (~one space) so it reads like "1. text"
-     instead of leaving a wide gap after the period. */
-  gap: 0.4em;
+  /* Tight spacing between the content and the trailing ↩ back-link. */
+  gap: 0.3em;
   padding: 2px 0;
+  /* Footnotes read smaller than body text (16px). Matches .listHeading. */
+  font-size: var(--mantine-font-size-sm);
 }
 
-.definitionMarker {
-  order: -1; /* keep the "N." marker on the LEFT though it follows content in DOM (#146) */
-  flex: 0 0 auto;
-  min-width: 1.5em;
-  /* Right-align within the narrow column so the period sits next to the text
-     and multi-digit numbers (10, 11, …) stay aligned on their right edge. */
-  text-align: right;
-  font-variant-numeric: tabular-nums;
-  color: var(--mantine-color-dimmed);
-  user-select: none;
-}
-
+/* The "N." number is decorative (from the --footnote-number CSS var on the
+   wrapper, never in the document model) and is rendered inline at the start of
+   the first content line via ::before. This keeps text and wrapped lines flush
+   to the left margin — no hanging indent — while the editable contentDOM stays
+   the FIRST DOM child (#146). */
 .definitionContent {
   flex: 1 1 auto;
   min-width: 0;
 }
 
-/* The inner editable paragraph inherits `.ProseMirror p { margin: 0.5em 0 }`,
-   which pushes the first text line ~0.5em below the "N." marker (aligned to
-   flex-start), making the number float above the text. Drop the outer margins
-   so the marker and the first line share the same top edge — same approach
-   used for callouts in core.css. */
+.definitionContent > :first-child::before {
+  content: var(--footnote-number, "?") ". ";
+  color: var(--mantine-color-dimmed);
+  font-variant-numeric: tabular-nums;
+  user-select: none;
+}
+
+/* The inner editable paragraph inherits `.ProseMirror p { margin: 0.5em 0 }`.
+   Drop the outer margins so the definition sits tight to the heading above and
+   the ::before number aligns with the top of the row — same approach used for
+   callouts in core.css. */
 .definitionContent > :first-child {
   margin-top: 0;
 }

apps/client/src/features/editor/components/image/image-menu.tsx

@@ -38,6 +38,14 @@ export function ImageMenu({ editor }: EditorMenuProps) {
         return null;
       }
 
+      // #343 PART 1: skip the expensive per-keystroke work (getAttributes + the
+      // alignment isActive() probes) unless an image is actually active. The
+      // menu is only shown when an image is active (see shouldShow), so a null
+      // state while inactive is never rendered — behavior is unchanged.
+      if (!ctx.editor.isActive("image")) {
+        return null;
+      }
+
       const imageAttrs = ctx.editor.getAttributes("image");
 
       return {

apps/client/src/features/editor/components/link/link-view.tsx

@@ -24,7 +24,7 @@ import classes from "./link.module.css";
 import { useTranslation } from "react-i18next";
 import { INTERNAL_LINK_REGEX } from "@/lib/constants";
 import { LinkEditorPanel } from "@/features/editor/components/link/link-editor-panel.tsx";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
 import { useSharePageQuery } from "@/features/share/queries/share-query.ts";
 import { buildSharedPageUrl } from "@/features/page/page.utils.ts";
 import { extractPageSlugId } from "@/lib";
@@ -83,7 +83,7 @@ export default function LinkView(props: MarkViewProps) {
   const isPopoverVisible = popoverState !== "closed";
   const activeView = isPopoverVisible ? popoverState : lastOpenState.current;
 
-  const { data: linkedPage } = usePageQuery({
+  const { data: linkedPage } = usePageMetaQuery({
     pageId: isPopoverVisible && slugId && !isShareRoute ? slugId : null,
   });
 

apps/client/src/features/editor/components/math/math-block-lazy.tsx

@@ -0,0 +1,19 @@
+import { lazy, Suspense } from "react";
+import { NodeViewProps } from "@tiptap/react";
+
+// Lazily load the KaTeX-backed block math view so the katex chunk is fetched
+// only when a document actually contains a math node (mirrors the mermaid/
+// excalidraw lazy pattern). The local Suspense keeps a slow katex chunk from
+// crashing or blocking the whole editor: while it loads we render the raw
+// LaTeX source as a node-sized placeholder.
+const MathBlockView = lazy(
+  () => import("@/features/editor/components/math/math-block.tsx"),
+);
+
+export default function MathBlockViewLazy(props: NodeViewProps) {
+  return (
+    <Suspense fallback={<div data-katex="true">{props.node.attrs.text}</div>}>
+      <MathBlockView {...props} />
+    </Suspense>
+  );
+}

apps/client/src/features/editor/components/math/math-inline-lazy.tsx

@@ -0,0 +1,19 @@
+import { lazy, Suspense } from "react";
+import { NodeViewProps } from "@tiptap/react";
+
+// Lazily load the KaTeX-backed inline math view so the katex chunk is fetched
+// only when a document actually contains a math node (mirrors the mermaid/
+// excalidraw lazy pattern). The local Suspense keeps a slow katex chunk from
+// crashing or blocking the whole editor: while it loads we render the raw
+// LaTeX source as a node-sized placeholder.
+const MathInlineView = lazy(
+  () => import("@/features/editor/components/math/math-inline.tsx"),
+);
+
+export default function MathInlineViewLazy(props: NodeViewProps) {
+  return (
+    <Suspense fallback={<span data-katex="true">{props.node.attrs.text}</span>}>
+      <MathInlineView {...props} />
+    </Suspense>
+  );
+}

apps/client/src/features/editor/components/mention/mention-list.tsx

@@ -25,7 +25,7 @@ import { IconFileDescription, IconPlus } from "@tabler/icons-react";
 import { useSpaceQuery } from "@/features/space/queries/space-query.ts";
 import { useParams } from "react-router-dom";
 import { v7 as uuid7 } from "uuid";
-import { useAtom } from "jotai";
+import { useAtom, useSetAtom, useStore } from "jotai";
 import { currentUserAtom } from "@/features/user/atoms/current-user-atom.ts";
 import {
   MentionListProps,
@@ -34,7 +34,7 @@ import {
 import { IPage } from "@/features/page/types/page.types";
 import {
   useCreatePageMutation,
-  usePageQuery,
+  usePageMetaQuery,
 } from "@/features/page/queries/page-query";
 import { treeDataAtom } from "@/features/page/tree/atoms/tree-data-atom";
 import { treeModel } from "@/features/page/tree/model/tree-model";
@@ -50,12 +50,16 @@ const MentionList = forwardRef<any, MentionListProps>((props, ref) => {
   const [countAnnouncement, setCountAnnouncement] = useState("");
   const [selectionAnnouncement, setSelectionAnnouncement] = useState("");
   const { pageSlug, spaceSlug } = useParams();
-  const { data: page } = usePageQuery({ pageId: extractPageSlugId(pageSlug) });
+  const { data: page } = usePageMetaQuery({ pageId: extractPageSlugId(pageSlug) });
   const { data: space } = useSpaceQuery(spaceSlug);
   const [currentUser] = useAtom(currentUserAtom);
   const [renderItems, setRenderItems] = useState<MentionSuggestionItem[]>([]);
   const { t } = useTranslation();
-  const [data, setData] = useAtom(treeDataAtom);
+  // Setter-only: the tree value is read only imperatively inside createPage
+  // (via `store` below), never at render, so useSetAtom avoids re-rendering the
+  // mention popup on any tree event.
+  const setData = useSetAtom(treeDataAtom);
+  const store = useStore();
   const createPageMutation = useCreatePageMutation();
   const emit = useQueryEmit();
   const isInCommentContext = props.isInCommentContext ?? false;
@@ -272,9 +276,11 @@ const MentionList = forwardRef<any, MentionListProps>((props, ref) => {
         children: [],
       };
 
-      const lastIndex = data.length;
+      // Read the live tree imperatively at call time.
+      const currentTree = store.get(treeDataAtom);
+      const lastIndex = currentTree.length;
 
-      setData(treeModel.insert(data, parentId, newNode, lastIndex));
+      setData(treeModel.insert(currentTree, parentId, newNode, lastIndex));
 
       props.command({
         id: uuid7(),

apps/client/src/features/editor/components/mention/mention-view.tsx

@@ -2,7 +2,7 @@ import { NodeViewProps, NodeViewWrapper } from "@tiptap/react";
 import { ActionIcon, Anchor, Text } from "@mantine/core";
 import { IconFileDescription } from "@tabler/icons-react";
 import { Link, useLocation, useNavigate, useParams } from "react-router-dom";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
 import { useSharePageQuery } from "@/features/share/queries/share-query.ts";
 import {
   buildPageUrl,
@@ -36,7 +36,7 @@ export function MentionContent({ attrs }: { attrs: MentionAttrs }) {
     data: page,
     isLoading,
     isError,
-  } = usePageQuery({ pageId: isPageMention && !isShareRoute ? slugId : null });
+  } = usePageMetaQuery({ pageId: isPageMention && !isShareRoute ? slugId : null });
 
   const { data: sharedPage } = useSharePageQuery({
     pageId: isPageMention && isShareRoute ? slugId : undefined,

apps/client/src/features/editor/components/pdf/pdf-menu.tsx

@@ -25,6 +25,13 @@ export function PdfMenu({ editor }: EditorMenuProps) {
         return null;
       }
 
+      // #343 PART 1: skip getAttributes unless a pdf node is active. The menu
+      // only shows for an active pdf node (shouldShow), so the null state while
+      // inactive is never rendered — behavior unchanged.
+      if (!ctx.editor.isActive("pdf")) {
+        return null;
+      }
+
       const pdfAttrs = ctx.editor.getAttributes("pdf");
 
       return {

apps/client/src/features/editor/components/subpages/subpages-menu.tsx

@@ -70,7 +70,14 @@ export const SubpagesMenu = React.memo(
     // toggle without re-rendering on every keystroke.
     const isRecursive = useEditorState({
       editor,
-      selector: (ctx) => ctx.editor?.getAttributes("subpages")?.recursive ?? false,
+      // #343 PART 1: skip getAttributes unless a subpages node is active. The
+      // menu only shows for an active subpages node (shouldShow), so the value
+      // is only read then; getAttributes on an inactive node returns the default
+      // (recursive === false) anyway, so this is behavior-preserving.
+      selector: (ctx) =>
+        ctx.editor?.isActive("subpages")
+          ? (ctx.editor.getAttributes("subpages")?.recursive ?? false)
+          : false,
     });
 
     return (

apps/client/src/features/editor/components/table-of-contents/table-of-contents.tsx

@@ -4,6 +4,7 @@ import React, { FC, useEffect, useRef, useState } from "react";
 import classes from "./table-of-contents.module.css";
 import clsx from "clsx";
 import { Box, Text, Title } from "@mantine/core";
+import { useDebouncedCallback } from "@mantine/hooks";
 import { useTranslation } from "react-i18next";
 
 type TableOfContentsProps = {
@@ -79,13 +80,21 @@ export const TableOfContents: FC<TableOfContentsProps> = (props) => {
     setHeadingDOMNodes(result.nodes);
   };
 
+  // Debounce the update-driven rescan: `$nodes("heading")` scans every heading
+  // in the document, and it previously ran on EVERY keystroke while the TOC
+  // panel was open. The panel is derived UI, so recomputing ~300ms after typing
+  // settles keeps it correct without doing an all-headings scan per keystroke
+  // (#343, PART 7). `useDebouncedCallback` returns a stable reference and always
+  // invokes the latest `handleUpdate`.
+  const debouncedHandleUpdate = useDebouncedCallback(handleUpdate, 300);
+
   useEffect(() => {
-    props.editor?.on("update", handleUpdate);
+    props.editor?.on("update", debouncedHandleUpdate);
 
     return () => {
-      props.editor?.off("update", handleUpdate);
+      props.editor?.off("update", debouncedHandleUpdate);
     };
-  }, [props.editor]);
+  }, [props.editor, debouncedHandleUpdate]);
 
   useEffect(
     () => {

apps/client/src/features/editor/components/video/video-menu.tsx

@@ -31,6 +31,13 @@ export function VideoMenu({ editor }: EditorMenuProps) {
         return null;
       }
 
+      // #343 PART 1: skip getAttributes + alignment isActive() probes unless a
+      // video is active. The menu only shows for an active video (shouldShow),
+      // so the null state while inactive is never rendered — behavior unchanged.
+      if (!ctx.editor.isActive("video")) {
+        return null;
+      }
+
       const videoAttrs = ctx.editor.getAttributes("video");
 
       return {

apps/client/src/features/editor/extensions/extensions.ts

@@ -81,8 +81,8 @@ import {
   createResizeHandle,
   buildResizeClasses,
 } from "@/features/editor/components/common/node-resize-handles.ts";
-import MathInlineView from "@/features/editor/components/math/math-inline.tsx";
-import MathBlockView from "@/features/editor/components/math/math-block.tsx";
+import MathInlineView from "@/features/editor/components/math/math-inline-lazy.tsx";
+import MathBlockView from "@/features/editor/components/math/math-block-lazy.tsx";
 import ImageView from "@/features/editor/components/image/image-view.tsx";
 import CalloutView from "@/features/editor/components/callout/callout-view.tsx";
 import StatusView from "@/features/editor/components/status/status-view.tsx";
@@ -90,7 +90,7 @@ import VideoView from "@/features/editor/components/video/video-view.tsx";
 import AudioView from "@/features/editor/components/audio/audio-view.tsx";
 import AttachmentView from "@/features/editor/components/attachment/attachment-view.tsx";
 import CodeBlockView from "@/features/editor/components/code-block/code-block-view.tsx";
-import DrawioView from "../components/drawio/drawio-view";
+import DrawioView from "../components/drawio/drawio-view-lazy.tsx";
 import ExcalidrawView from "@/features/editor/components/excalidraw/excalidraw-view-lazy.tsx";
 import EmbedView from "@/features/editor/components/embed/embed-view.tsx";
 import HtmlEmbedView from "@/features/editor/components/html-embed/html-embed-view.tsx";

apps/client/src/features/editor/extensions/markdown-clipboard.paste.test.ts

@@ -0,0 +1,206 @@
+import { describe, it, expect } from "vitest";
+import { Editor } from "@tiptap/core";
+import { Document } from "@tiptap/extension-document";
+import { Paragraph } from "@tiptap/extension-paragraph";
+import { Text } from "@tiptap/extension-text";
+import { Bold } from "@tiptap/extension-bold";
+import { Italic } from "@tiptap/extension-italic";
+import { MarkdownClipboard } from "./markdown-clipboard";
+
+/**
+ * Integration coverage for the async `handlePaste` seam (issue #347). The paste
+ * conversion moved to `@docmost/prosemirror-markdown`'s browser entry, whose
+ * `markdownToProseMirror` is async — so `handlePaste` captures the range, claims
+ * the event (returns true), and dispatches the insert on the next microtask.
+ * These tests drive that path end to end on a minimal schema (a plain-markdown
+ * paste whose converted nodes fit paragraph/text/bold/italic), asserting the
+ * text lands with the right marks and that the raw markdown syntax is consumed
+ * (recognized as markdown, not inserted literally).
+ */
+
+function makeEditor() {
+  const element = document.createElement("div");
+  document.body.appendChild(element);
+  return new Editor({
+    element,
+    extensions: [
+      Document,
+      Paragraph,
+      Text,
+      Bold,
+      Italic,
+      MarkdownClipboard.configure({ transformPastedText: true }),
+    ],
+    content: { type: "doc", content: [{ type: "paragraph" }] },
+  });
+}
+
+// Locate the markdownClipboard plugin and invoke its handlePaste directly with a
+// synthetic clipboard event (jsdom has no real paste pipeline). The plugin's
+// handlePaste closes over the extension `this`, so calling it off the plugin
+// props preserves `this.editor`/`this.options`.
+function paste(editor: Editor, text: string): boolean {
+  const view = editor.view;
+  const plugin = view.state.plugins.find(
+    (p: any) => p.props && p.spec?.key,
+  ) as any;
+  const event = {
+    clipboardData: {
+      getData: (type: string) => (type === "text/plain" ? text : ""),
+    },
+  } as unknown as ClipboardEvent;
+  // Find the specific handlePaste that belongs to the markdown clipboard plugin.
+  const md = view.state.plugins.find(
+    (p: any) => typeof p.props?.handlePaste === "function",
+  ) as any;
+  return md.props.handlePaste(view, event, view.state.selection.content());
+}
+
+// Flush the microtask queue so the async .then() dispatch runs.
+const flush = () => new Promise((r) => setTimeout(r, 0));
+
+describe("MarkdownClipboard handlePaste (async md -> PM)", () => {
+  it("converts a plain-markdown paste with bold/italic into marked text", async () => {
+    const editor = makeEditor();
+    const claimed = paste(editor, "hello **bold** and *italic*");
+    // The paste is claimed synchronously (async insert follows).
+    expect(claimed).toBe(true);
+    await flush();
+
+    const json = editor.getJSON();
+    const text = JSON.stringify(json);
+    // The raw markdown asterisks are consumed (recognized), not inserted literally.
+    expect(editor.getText()).not.toContain("**");
+    expect(editor.getText()).toContain("bold");
+    expect(editor.getText()).toContain("italic");
+    // The bold/italic marks materialized.
+    expect(text).toContain('"bold"');
+    expect(text).toContain('"italic"');
+    editor.destroy();
+  });
+
+  it("recognizes a bullet list paste as list structure (not literal '-')", async () => {
+    // A bullet list is not representable in this minimal schema, so the converter
+    // output would fail PMNode.fromJSON and the catch inserts raw text. Use a
+    // paste whose nodes DO fit the schema to assert the happy path instead: two
+    // paragraphs separated by a blank line.
+    const editor = makeEditor();
+    paste(editor, "first para\n\nsecond para");
+    await flush();
+    const json = editor.getJSON() as any;
+    const paras = (json.content || []).filter(
+      (n: any) => n.type === "paragraph",
+    );
+    // Two paragraphs materialized from the blank-line-separated markdown.
+    expect(paras.length).toBeGreaterThanOrEqual(2);
+    expect(editor.getText()).toContain("first para");
+    expect(editor.getText()).toContain("second para");
+    editor.destroy();
+  });
+
+  it("falls back to raw text when conversion yields nodes the schema lacks", async () => {
+    // `# heading` converts to a `heading` node absent from this minimal schema,
+    // so PMNode.fromJSON throws and the catch re-inserts the raw text — the user
+    // never loses their clipboard content.
+    const editor = makeEditor();
+    paste(editor, "# a heading line");
+    await flush();
+    // Content is preserved (either as heading text or literal), never dropped.
+    expect(editor.getText()).toContain("a heading line");
+    editor.destroy();
+  });
+});
+
+// The async seam captures the target range synchronously, then replaces on the
+// next microtask. If the document changed under it between capture and resolve
+// (impossible in prod — same microtask — but pinned here), BOTH the success
+// (replaceRange) and the fail-open (insertText) branches must fall back to the
+// LIVE selection rather than a stale absolute range, so neither clobbers content
+// nor throws a RangeError. We force the mid-flight change by dispatching a
+// doc-mutating transaction AFTER the synchronous claim but BEFORE flushing the
+// microtask that runs the `.then`/`.catch`.
+describe("MarkdownClipboard handlePaste — doc-changed-mid-flight guard", () => {
+  // Replace the whole doc with one paragraph of `text` (synchronous dispatch).
+  // An empty string yields an empty paragraph (a text node may not be empty).
+  function seedContent(editor: Editor, text: string) {
+    editor.commands.setContent({
+      type: "doc",
+      content: [
+        text
+          ? { type: "paragraph", content: [{ type: "text", text }] }
+          : { type: "paragraph" },
+      ],
+    });
+  }
+
+  it("success branch: mid-flight doc change routes the paste to the LIVE selection, never the stale range (clobber-proving)", async () => {
+    // The paste captures a NON-EMPTY range {1,5} (over "AAAA"). Then, before the
+    // async resolve, the doc GROWS ("MARKER" inserted at the start) and the cursor
+    // is parked at the doc END. The captured {1,5} is now stale and points INTO
+    // "MARKER". A WORKING guard replaces at the live (end) selection → MARKER is
+    // untouched. A BROKEN guard replaces the stale {1,5} → it erases the first
+    // characters of MARKER (this is what a zero-width `from==to` range could never
+    // reveal, which is why the earlier version was vacuous).
+    const editor = makeEditor();
+    seedContent(editor, "AAAABBBB");
+    editor.commands.setTextSelection({ from: 1, to: 5 }); // captured range = {1,5}
+    const claimed = paste(editor, "hello **bold**");
+    expect(claimed).toBe(true);
+
+    // Mid-flight: grow the doc and move the cursor to a KNOWN-safe end position.
+    editor.view.dispatch(editor.view.state.tr.insertText("MARKER", 1));
+    const end = editor.state.doc.content.size;
+    editor.commands.setTextSelection({ from: end, to: end });
+    await flush();
+
+    const text = editor.getText();
+    // MARKER intact only if the guard used the live selection, not the stale range.
+    expect(text).toContain("MARKER");
+    expect(text).toContain("bold");
+    expect(text).not.toContain("**");
+    editor.destroy();
+  });
+
+  it("fail-open branch: a mid-flight doc SHRINK makes the stale `to` out of bounds — the guard must avoid a RangeError (throw-proving)", async () => {
+    // The paste captures a range {1,9} over an 8-char paragraph, then the
+    // conversion FAILS (`# heading` -> a heading node the minimal schema lacks,
+    // so PMNode.fromJSON throws -> the fail-open catch runs). Before the reject,
+    // the doc is SHRUNK to an empty paragraph, so the captured `to` (9) is now far
+    // past the doc's end. A WORKING guard inserts the raw text at the live (valid)
+    // selection → "raw heading" lands. A BROKEN guard does insertText(md, 1, 9) on
+    // a size-2 doc → RangeError, so the dispatch never runs and "raw heading" is
+    // absent (the assertion reddens). A zero-width/growing-doc setup could never
+    // push `to` out of bounds, which is why the earlier version was vacuous.
+    const editor = makeEditor();
+    seedContent(editor, "AAAABBBB");
+    editor.commands.setTextSelection({ from: 1, to: 9 }); // captured range = {1,9}
+    paste(editor, "# raw heading");
+
+    // Mid-flight: shrink the doc so the captured `to` = 9 is now out of bounds.
+    seedContent(editor, "");
+    await flush();
+
+    const text = editor.getText();
+    // Raw text lands (via the live selection) only if the guard avoided the
+    // stale, now-out-of-bounds range.
+    expect(text).toContain("raw heading");
+    editor.destroy();
+  });
+
+  it("two pastes in flight: neither payload is lost (no data loss)", async () => {
+    // Prod-unreachable (two paste events are separate macrotasks, and each
+    // conversion resolves on a microtask before the next), but pinned here: when
+    // both resolve back-to-back, the second sees the changed doc and inserts at
+    // the live selection the first left — so the two payloads may INTERLEAVE, but
+    // neither is dropped. We assert no data loss, not contiguity.
+    const editor = makeEditor();
+    paste(editor, "alphaword");
+    paste(editor, "betaword");
+    await flush();
+    const text = editor.getText();
+    // Neither payload fully dropped (interleaving may split one of them).
+    expect(text).toContain("alpha");
+    expect(text).toContain("beta");
+    editor.destroy();
+  });
+});

apps/client/src/features/editor/extensions/markdown-clipboard.test.ts

@@ -1,5 +1,12 @@
 import { describe, it, expect } from "vitest";
-import { htmlToMarkdown } from "@docmost/editor-ext";
+// Markdown conversion now goes through the canonical package's BROWSER entry
+// (issue #347): the same converter the server import/export uses, resolved via
+// the `browser` exports condition so it runs on the native `DOMParser` (the
+// client jsdom vitest env provides one) with jsdom never bundled.
+import {
+  convertProseMirrorToMarkdown,
+  markdownToProseMirrorSync,
+} from "@docmost/prosemirror-markdown/browser";
 import {
   normalizeTableColumnWidths,
   classifyClipboardSelection,
@@ -175,10 +182,13 @@ describe("classifyClipboardSelection", () => {
 
 // Output-level tests for the table clipboard regression: copying a table must
 // yield a real GFM pipe table, NOT one-value-per-line concatenated cells.
-// These exercise the actual markdown produced by htmlToMarkdown (the same
-// serializer step the clipboardTextSerializer runs), so they pin the OUTPUT
-// shape that the classifier-flag tests above do not cover.
-describe("table clipboard markdown output (htmlToMarkdown)", () => {
+// These exercise the actual markdown produced by convertProseMirrorToMarkdown —
+// the same serializer step the clipboardTextSerializer now runs (issue #347) —
+// so they pin the OUTPUT shape that the classifier-flag tests above do not cover.
+// Input is ProseMirror JSON (what the copied slice serializes to), matching the
+// clipboardTextSerializer's new call: it wraps the slice content in a synthetic
+// `doc` (and the bare-rows case in a `table`) and calls the converter.
+describe("table clipboard markdown output (convertProseMirrorToMarkdown)", () => {
   // Trim each line and drop blanks so structural assertions are whitespace-robust.
   function lines(md: string): string[] {
     return md
@@ -188,10 +198,10 @@ describe("table clipboard markdown output (htmlToMarkdown)", () => {
   }
 
   // A GFM separator row like "| --- | --- |" (any number of columns), tolerant
-  // of the padding turndown emits.
+  // of the padding the serializer emits.
   function isSeparatorRow(line: string): boolean {
     const compact = line.replace(/\s+/g, "");
-    return /^\|(?:-{3,}\|)+$/.test(compact);
+    return /^\|(?::?-{2,}:?\|)+$/.test(compact);
   }
 
   // Split a pipe-delimited row into trimmed cell values.
@@ -203,42 +213,33 @@ describe("table clipboard markdown output (htmlToMarkdown)", () => {
       .map((c) => c.trim());
   }
 
-  it("serializes a header-less partial cell selection (bare rows) as a valid GFM pipe table", () => {
-    // Mirror the serializer's `wrapBareRows` branch exactly: bare <tr> nodes are
-    // wrapped in <table><tbody> and htmlToMarkdown(div.innerHTML) is called.
-    // See markdown-clipboard.ts clipboardTextSerializer:
-    //   const table = document.createElement("table");
-    //   const tbody = document.createElement("tbody");
-    //   tbody.appendChild(fragment); table.appendChild(tbody);
-    //   div.appendChild(table);
-    //   return htmlToMarkdown(div.innerHTML);
-    const div = document.createElement("div");
-    const table = document.createElement("table");
-    const tbody = document.createElement("tbody");
-    for (const [c1, c2] of [
-      ["a", "b"],
-      ["c", "d"],
-    ]) {
-      const tr = document.createElement("tr");
-      const td1 = document.createElement("td");
-      td1.textContent = c1;
-      const td2 = document.createElement("td");
-      td2.textContent = c2;
-      tr.appendChild(td1);
-      tr.appendChild(td2);
-      tbody.appendChild(tr);
-    }
-    table.appendChild(tbody);
-    div.appendChild(table);
+  const cell = (t: string) => ({
+    type: "tableCell",
+    content: [{ type: "paragraph", content: [{ type: "text", text: t }] }],
+  });
+  const headerCell = (t: string) => ({
+    type: "tableHeader",
+    content: [{ type: "paragraph", content: [{ type: "text", text: t }] }],
+  });
+  const row = (nodes: any[]) => ({ type: "tableRow", content: nodes });
 
-    const md = htmlToMarkdown(div.innerHTML);
+  it("serializes a header-less partial cell selection (bare rows) as a valid GFM pipe table", () => {
+    // Mirror the serializer's `wrapBareRows` branch: bare tableRow nodes are
+    // wrapped in a synthetic `table` and convertProseMirrorToMarkdown is called
+    // (see markdown-clipboard.ts clipboardTextSerializer).
+    const rows = [
+      row([cell("a"), cell("b")]),
+      row([cell("c"), cell("d")]),
+    ];
+    const md = convertProseMirrorToMarkdown({
+      type: "doc",
+      content: [{ type: "table", content: rows }],
+    });
     const ls = lines(md);
 
-    // Valid GFM: a header/data separator row is present (an empty header is
-    // synthesized by the GFM turndown plugin for a header-less table — fine).
+    // Valid GFM: a header/data separator row is present.
     expect(ls.some(isSeparatorRow)).toBe(true);
-    // NOT the old broken "one value per line" shape: every line is pipe-delimited
-    // and no line is a bare cell value on its own.
+    // NOT the old broken "one value per line" shape: every line is pipe-delimited.
     expect(ls.every((l) => l.includes("|"))).toBe(true);
     expect(md).not.toMatch(/^\s*(a|b|c|d)\s*$/m);
     // The cell values land in real pipe-delimited data rows.
@@ -248,39 +249,21 @@ describe("table clipboard markdown output (htmlToMarkdown)", () => {
   });
 
   it("serializes a whole table with a header row as a proper GFM table (headline regression)", () => {
-    // Mirror the serializer's non-wrap branch: the full <table> node is appended
-    // directly (div.appendChild(fragment)) and htmlToMarkdown(div.innerHTML) runs.
-    const div = document.createElement("div");
-    const table = document.createElement("table");
-
-    const thead = document.createElement("thead");
-    const headerRow = document.createElement("tr");
-    for (const h of ["Name", "Age"]) {
-      const th = document.createElement("th");
-      th.textContent = h;
-      headerRow.appendChild(th);
-    }
-    thead.appendChild(headerRow);
-    table.appendChild(thead);
-
-    const tbody = document.createElement("tbody");
-    for (const [name, age] of [
-      ["Alice", "30"],
-      ["Bob", "25"],
-    ]) {
-      const tr = document.createElement("tr");
-      const td1 = document.createElement("td");
-      td1.textContent = name;
-      const td2 = document.createElement("td");
-      td2.textContent = age;
-      tr.appendChild(td1);
-      tr.appendChild(td2);
-      tbody.appendChild(tr);
-    }
-    table.appendChild(tbody);
-    div.appendChild(table);
-
-    const md = htmlToMarkdown(div.innerHTML);
+    // Mirror the serializer's non-wrap branch: the full `table` node is the
+    // slice content and convertProseMirrorToMarkdown runs on it.
+    const md = convertProseMirrorToMarkdown({
+      type: "doc",
+      content: [
+        {
+          type: "table",
+          content: [
+            row([headerCell("Name"), headerCell("Age")]),
+            row([cell("Alice"), cell("30")]),
+            row([cell("Bob"), cell("25")]),
+          ],
+        },
+      ],
+    });
     const ls = lines(md);
 
     // Proper GFM structure: separator row + all rows pipe-delimited.
@@ -296,3 +279,146 @@ describe("table clipboard markdown output (htmlToMarkdown)", () => {
     expect(md).not.toMatch(/^\s*(Name|Age|Alice|Bob|30|25)\s*$/m);
   });
 });
+
+// #347 acceptance: pasting CANONICAL markdown yields the SAME nodes the server
+// import produces for the same text. The paste path calls markdownToProseMirror
+// (the package browser entry) — the identical converter the server import uses —
+// so asserting the converter (via the browser entry, on the native DOMParser)
+// recognizes each canon form pins the paste-parity guarantee. These forms were
+// NOT recognized by the old editor-ext marked layer the paste used before.
+describe("canonical markdown paste recognition (browser entry parity)", () => {
+  // Collect every node type present in a doc (recursively).
+  const collectTypes = (n: any, set = new Set<string>()): Set<string> => {
+    if (!n || typeof n !== "object") return set;
+    if (n.type) set.add(n.type);
+    if (Array.isArray(n.content)) n.content.forEach((c) => collectTypes(c, set));
+    return set;
+  };
+  const findNode = (n: any, type: string): any => {
+    if (!n || typeof n !== "object") return undefined;
+    if (n.type === type) return n;
+    if (Array.isArray(n.content)) {
+      for (const c of n.content) {
+        const hit = findNode(c, type);
+        if (hit) return hit;
+      }
+    }
+    return undefined;
+  };
+  const allText = (n: any): string => {
+    if (!n || typeof n !== "object") return "";
+    if (typeof n.text === "string") return n.text;
+    if (Array.isArray(n.content)) return n.content.map(allText).join("");
+    return "";
+  };
+
+  it("^[…] inline footnote -> footnoteReference + footnotesList", () => {
+    const doc = markdownToProseMirrorSync("Body^[a note here].");
+    const types = collectTypes(doc);
+    expect(types.has("footnoteReference")).toBe(true);
+    expect(types.has("footnotesList")).toBe(true);
+    expect(types.has("footnoteDefinition")).toBe(true);
+  });
+
+  it('<!--img {…}--> attached image comment -> image with align', () => {
+    const doc = markdownToProseMirrorSync(
+      '![alt](/files/x.png) <!--img {"align":"left"}-->',
+    );
+    const img = findNode(doc, "image");
+    expect(img).toBeTruthy();
+    expect(img.attrs?.align).toBe("left");
+    expect(img.attrs?.src).toBe("/files/x.png");
+  });
+
+  it("> [!type] Obsidian callout -> callout node with type", () => {
+    const doc = markdownToProseMirrorSync("> [!warning]\n> be careful");
+    const callout = findNode(doc, "callout");
+    expect(callout).toBeTruthy();
+    expect(callout.attrs?.type).toBe("warning");
+    expect(allText(callout)).toContain("be careful");
+  });
+
+  it("$…$ inline math -> mathInline node", () => {
+    const doc = markdownToProseMirrorSync("Euler: $e^{i\\pi}+1=0$ done");
+    const math = findNode(doc, "mathInline");
+    expect(math).toBeTruthy();
+    expect(math.attrs?.text).toContain("e^{i\\pi}");
+  });
+
+  it("==…== highlight -> highlight mark", () => {
+    const doc = markdownToProseMirrorSync("A ==marked== word");
+    const marked = findNode(doc, "text");
+    // The highlighted run carries a `highlight` mark somewhere in the doc.
+    const hasHighlight = (n: any): boolean => {
+      if (!n || typeof n !== "object") return false;
+      if (
+        n.type === "text" &&
+        (n.marks || []).some((m: any) => m.type === "highlight")
+      )
+        return true;
+      return Array.isArray(n.content) ? n.content.some(hasHighlight) : false;
+    };
+    expect(marked).toBeTruthy();
+    expect(hasHighlight(doc)).toBe(true);
+  });
+
+  it("<!--subpages--> standalone comment -> subpages node", () => {
+    const doc = markdownToProseMirrorSync("intro\n\n<!--subpages-->\n\nafter");
+    expect(collectTypes(doc).has("subpages")).toBe(true);
+  });
+});
+
+// #347 negatives: plain text carrying markdown-LIKE punctuation must NOT be
+// silently converted/mangled (currency, bare `==`, a `[^1]` reference form).
+describe("plain-text paste negatives (no phantom conversion)", () => {
+  const findNode = (n: any, type: string): any => {
+    if (!n || typeof n !== "object") return undefined;
+    if (n.type === type) return n;
+    if (Array.isArray(n.content)) {
+      for (const c of n.content) {
+        const hit = findNode(c, type);
+        if (hit) return hit;
+      }
+    }
+    return undefined;
+  };
+  const collectTypes = (n: any, set = new Set<string>()): Set<string> => {
+    if (!n || typeof n !== "object") return set;
+    if (n.type) set.add(n.type);
+    if (Array.isArray(n.content)) n.content.forEach((c) => collectTypes(c, set));
+    return set;
+  };
+  const allText = (n: any): string => {
+    if (!n || typeof n !== "object") return "";
+    if (typeof n.text === "string") return n.text;
+    if (Array.isArray(n.content)) return n.content.map(allText).join("");
+    return "";
+  };
+
+  it("currency `$5 and $10` is NOT turned into math", () => {
+    const doc = markdownToProseMirrorSync("It costs $5 and $10 total");
+    expect(findNode(doc, "mathInline")).toBeFalsy();
+    expect(allText(doc)).toContain("$5 and $10");
+  });
+
+  it("a lone `==` is NOT turned into a highlight", () => {
+    const doc = markdownToProseMirrorSync("compare a == b in code");
+    const hasHighlight = (n: any): boolean => {
+      if (!n || typeof n !== "object") return false;
+      if (
+        n.type === "text" &&
+        (n.marks || []).some((m: any) => m.type === "highlight")
+      )
+        return true;
+      return Array.isArray(n.content) ? n.content.some(hasHighlight) : false;
+    };
+    expect(hasHighlight(doc)).toBe(false);
+    expect(allText(doc)).toContain("== b");
+  });
+
+  it("a `[^1]` reference form (no `^[`) is NOT turned into a footnote", () => {
+    const doc = markdownToProseMirrorSync("see note [^1] for details");
+    expect(collectTypes(doc).has("footnoteReference")).toBe(false);
+    expect(allText(doc)).toContain("[^1]");
+  });
+});

apps/client/src/features/editor/extensions/markdown-clipboard.ts

@@ -1,15 +1,23 @@
 // adapted from: https://github.com/aguingand/tiptap-markdown/blob/main/src/extensions/tiptap/clipboard.js - MIT
 import { Extension } from "@tiptap/core";
 import { Plugin, PluginKey, TextSelection } from "@tiptap/pm/state";
-import { DOMParser, DOMSerializer, Fragment, Slice } from "@tiptap/pm/model";
+import { DOMParser, DOMSerializer, Fragment, Slice, Node as PMNode } from "@tiptap/pm/model";
 import { find } from "linkifyjs";
 import {
-  markdownToHtml,
-  htmlToMarkdown,
   canonicalizeFootnotes,
   FOOTNOTES_LIST_NAME,
   FOOTNOTE_REFERENCE_NAME,
 } from "@docmost/editor-ext";
+// Markdown <-> ProseMirror conversion now lives ONLY in the canonical
+// `@docmost/prosemirror-markdown` package (issue #347). The BROWSER entry uses
+// the native `DOMParser` for its HTML->DOM stage (jsdom stays out of the client
+// bundle) while producing the SAME nodes the server import does — so a paste of
+// canonical markdown (`^[…]`, `<!--img …-->`, `> [!type]`, `$…$`, `==…==`,
+// standalone comments) is recognized identically to import.
+import {
+  markdownToProseMirror,
+  convertProseMirrorToMarkdown,
+} from "@docmost/prosemirror-markdown/browser";
 import type { Schema } from "@tiptap/pm/model";
 
 export const MarkdownClipboard = Extension.create({
@@ -39,25 +47,24 @@ export const MarkdownClipboard = Extension.create({
               classifyClipboardSelection(topLevelNodes);
             if (!asMarkdown) return null;
 
-            const div = document.createElement("div");
-            const serializer = DOMSerializer.fromSchema(this.editor.schema);
-            const fragment = serializer.serializeFragment(slice.content);
-
+            // Convert the copied selection to Markdown through the canonical
+            // package (issue #347), the SAME serializer the server export uses,
+            // so a copied table/list matches the on-disk markdown form. The
+            // converter takes a ProseMirror `doc` JSON, so wrap the slice's
+            // top-level content in a synthetic doc.
+            const content = slice.content.toJSON() as any[];
             if (wrapBareRows) {
-              // A partial table cell-selection serializes to bare <tr> nodes
-              // (prosemirror-tables returns the whole `table` node only when the
-              // entire table is selected). Bare <tr> would be foster-parented
-              // away by the HTML parser inside htmlToMarkdown, so wrap them in
-              // <table><tbody> first for the GFM turndown rule to detect them.
-              const table = document.createElement("table");
-              const tbody = document.createElement("tbody");
-              tbody.appendChild(fragment);
-              table.appendChild(tbody);
-              div.appendChild(table);
-            } else {
-              div.appendChild(fragment);
+              // A partial table cell-selection serializes to bare `tableRow`
+              // nodes (prosemirror-tables yields the whole `table` node only for
+              // a full-table selection). The converter's table case expects a
+              // `table` wrapper, so wrap the bare rows in one — mirroring the old
+              // <table><tbody> wrap that the HTML->markdown step needed.
+              return convertProseMirrorToMarkdown({
+                type: "doc",
+                content: [{ type: "table", content }],
+              });
             }
-            return htmlToMarkdown(div.innerHTML);
+            return convertProseMirrorToMarkdown({ type: "doc", content });
           },
           handlePaste: (view, event, slice) => {
             if (!event.clipboardData) {
@@ -95,37 +102,115 @@ export const MarkdownClipboard = Extension.create({
               }
             }
 
-            const { tr } = view.state;
-            const { from, to } = view.state.selection;
+            const schema = this.editor.schema;
+            // Capture the target range NOW. markdownToProseMirror RETURNS A
+            // PROMISE (kept async only for the Node consumers' contract; the
+            // conversion pipeline itself is synchronous), so the actual replace
+            // happens on the next microtask. No user input can interleave a
+            // microtask, so the state is unchanged when we dispatch — but we
+            // still re-read the live state before replacing and, if the doc did
+            // change under us, fall back to the live selection rather than the
+            // captured (now-stale) range.
+            const from = view.state.selection.from;
+            const to = view.state.selection.to;
+            const startDoc = view.state.doc;
+            const md = text.replace(/\n+$/, "");
 
-            const parsed = markdownToHtml(text.replace(/\n+$/, ""));
-            const body = elementFromString(parsed);
-            normalizeTableColumnWidths(body);
+            void markdownToProseMirror(md)
+              .then((doc) => {
+                if (view.isDestroyed) return;
+                // Canonical PM-JSON -> HTML via the LIVE editor schema, then
+                // reuse the UNCHANGED downstream seam (normalizeTableColumnWidths
+                // + parseSlice + canonicalizePastedFootnotes). The JSON->HTML->
+                // JSON hop is lossless (same schema both directions); it lets the
+                // existing paste-insertion logic stay byte-identical — only the
+                // SOURCE of the markdown conversion changed (issue #347 guardrail:
+                // no converter logic in the client, only a call into the package).
+                const node = PMNode.fromJSON(schema, doc);
+                const div = document.createElement("div");
+                DOMSerializer.fromSchema(schema).serializeFragment(
+                  node.content,
+                  { document },
+                  div,
+                );
 
-            const parsedSlice = DOMParser.fromSchema(
-              this.editor.schema,
-            ).parseSlice(body, {
-              preserveWhitespace: true,
-            });
+                const body = elementFromString(div.innerHTML);
+                normalizeTableColumnWidths(body);
 
-            // A markdown paste builds its ProseMirror fragment directly (DOM ->
-            // parseSlice), bypassing the editor's footnoteSyncPlugin, which never
-            // reorders an existing list. So a pasted markdown block whose footnote
-            // definitions are out of order (or contains orphan defs) would be
-            // stored out of order. Canonicalize the self-contained pasted block so
-            // its footnotes come out reference-ordered, deduped and orphan-free
-            // (issue #228). See canonicalizePastedFootnotes for why this is scoped
-            // to whole-block pastes that carry their own footnotesList.
-            const contentNodes = canonicalizePastedFootnotes(
-              parsedSlice,
-              this.editor.schema,
-            );
+                const parsedSlice = DOMParser.fromSchema(schema).parseSlice(
+                  body,
+                  { preserveWhitespace: true },
+                );
 
-            tr.replaceRange(from, to, contentNodes);
-            const insertEnd = tr.mapping.map(from, 1);
-            tr.setSelection(TextSelection.near(tr.doc.resolve(Math.max(from, insertEnd - 2)), -1));
-            tr.setMeta('paste', true)
-            view.dispatch(tr);
+                // A markdown paste builds its ProseMirror fragment directly (DOM
+                // -> parseSlice), bypassing the editor's footnoteSyncPlugin, which
+                // never reorders an existing list. So a pasted markdown block whose
+                // footnote definitions are out of order (or contains orphan defs)
+                // would be stored out of order. Canonicalize the self-contained
+                // pasted block so its footnotes come out reference-ordered, deduped
+                // and orphan-free (issue #228). See canonicalizePastedFootnotes for
+                // why this is scoped to whole-block pastes that carry their own
+                // footnotesList.
+                const contentNodes = canonicalizePastedFootnotes(
+                  parsedSlice,
+                  schema,
+                );
+
+                // Target the captured range (normally still valid — same
+                // microtask). If the doc changed under us since capture, the
+                // captured absolute from/to are stale, so fall back to the live
+                // selection rather than StepMap-mapping the old range.
+                const tr = view.state.tr;
+                let mappedFrom = from;
+                let mappedTo = to;
+                if (view.state.doc !== startDoc) {
+                  // Defensive: if the doc changed under us, fall back to the
+                  // current selection rather than a stale absolute range.
+                  mappedFrom = view.state.selection.from;
+                  mappedTo = view.state.selection.to;
+                }
+                tr.replaceRange(mappedFrom, mappedTo, contentNodes);
+                const insertEnd = tr.mapping.map(mappedFrom, 1);
+                tr.setSelection(
+                  TextSelection.near(
+                    tr.doc.resolve(Math.max(mappedFrom, insertEnd - 2)),
+                    -1,
+                  ),
+                );
+                tr.setMeta("paste", true);
+                view.dispatch(tr);
+              })
+              .catch((err) => {
+                // Fail-open: a conversion error must not swallow the paste
+                // silently in a way that loses the text. We already claimed the
+                // event (returned true), so re-insert the raw text as a plain
+                // paragraph so the user never loses their clipboard content.
+                // Log it: this catch covers BOTH the converter and the success
+                // `.then` body (e.g. PMNode.fromJSON throwing on a schema drift
+                // between the canonical package and the live editor schema), so a
+                // silent degrade to raw text would otherwise be an invisible,
+                // non-reproducible regression ("my table pasted as text").
+                console.error(
+                  "markdown paste conversion failed, inserting raw text",
+                  err,
+                );
+                if (view.isDestroyed) return;
+                const tr = view.state.tr;
+                // Same guard the success path uses: if the doc changed under us
+                // since the range was captured (normally never — same microtask),
+                // the captured absolute from/to are stale and would throw a
+                // RangeError here (an unhandled rejection on a hot paste path).
+                // Fall back to the live selection instead of a stale range.
+                if (view.state.doc !== startDoc) {
+                  const sel = view.state.selection;
+                  tr.insertText(md, sel.from, sel.to);
+                } else {
+                  tr.insertText(md, from, to);
+                }
+                tr.setMeta("paste", true);
+                view.dispatch(tr);
+              });
+            // Claim the paste: we insert asynchronously above.
             return true;
           },
           // Strip trailing whitespace-only paragraphs from pasted content.

apps/client/src/features/editor/extensions/slash-command.ts

@@ -6,6 +6,23 @@ import getSuggestionItems from '@/features/editor/components/slash-menu/menu-ite
 
 export const slashMenuPluginKey = new PluginKey('slash-command');
 
+// getSuggestionItems fuzzy-matches EVERY command against the query (plus its
+// wrong-keyboard-layout remaps) and, while the slash menu is open, is invoked
+// TWICE per keystroke: once by the synchronous `allow` gate below and once by
+// the popup's `items` builder. A synchronous gating predicate can't be
+// debounced without breaking the suggestion decoration/activation, so instead we
+// memoize the LAST query's result: the two same-query calls in one keystroke
+// build the list only once, and the cache invalidates the moment the query
+// changes — so there is no stale-state risk (#343, PART 7).
+let lastQuery: string | null = null;
+let lastResult: ReturnType<typeof getSuggestionItems> | null = null;
+function suggestionItemsForQuery(query: string) {
+  if (query === lastQuery && lastResult) return lastResult;
+  lastQuery = query;
+  lastResult = getSuggestionItems({ query });
+  return lastResult;
+}
+
 // @ts-ignore
 const Command = Extension.create({
   name: 'slash-command',
@@ -38,7 +55,7 @@ const Command = Extension.create({
           // non-matching queries while keeping multi-word matches (e.g.
           // "/Heading 1") working.
           const query = state.doc.textBetween(range.from + 1, range.to);
-          const groups = getSuggestionItems({ query });
+          const groups = suggestionItemsForQuery(query);
           const hasMatches = Object.values(groups).some(
             (items) => items.length > 0,
           );
@@ -61,7 +78,9 @@ const Command = Extension.create({
 
 const SlashCommand = Command.configure({
   suggestion: {
-    items: getSuggestionItems,
+    // Share the per-query memo with `allow` so the pair of same-query calls in a
+    // single keystroke rebuilds the list once (#343, PART 7).
+    items: ({ query }: { query: string }) => suggestionItemsForQuery(query),
     render: renderItems,
   },
 });

apps/client/src/features/editor/gitmost/gitmost-global-bridge.tsx

@@ -1,8 +1,17 @@
 import { useEffect, useRef } from "react";
 import { useNavigate } from "react-router-dom";
 import { getDefaultStore } from "jotai";
-import { WebSocketStatus } from "@hocuspocus/provider";
-import { Editor } from "@tiptap/core";
+
+// Literal value of WebSocketStatus.Connected from @hocuspocus/provider. Inlined
+// so this always-mounted global bridge does not statically import
+// @hocuspocus/provider — that import pulls Yjs (and, through a shared chunk, the
+// whole TipTap engine) into the eager startup graph. yjsConnectionStatusAtom
+// already stores these raw status strings.
+const YJS_STATUS_CONNECTED = "connected";
+// Type-only: importing Editor as a type keeps @tiptap/core (the whole editor
+// engine) out of the eager global-shell graph — the bridge only uses it for
+// annotations/casts, never as a runtime value.
+import type { Editor } from "@tiptap/core";
 import {
   pageEditorAtom,
   yjsConnectionStatusAtom,
@@ -16,15 +25,19 @@ import {
   getSidebarPages,
 } from "@/features/page/services/page-service.ts";
 import { buildPageUrl } from "@/features/page/page.utils.ts";
-import {
+// Types are erased at build time, so importing them does not pull the module's
+// runtime (which drags in @tiptap + the editor-ext barrel). The actual recording
+// helpers are dynamically imported at call time inside createPageWithRecording,
+// keeping the editor engine out of the eager global-shell startup graph — the
+// bridge is mounted for every authenticated user but recording is a rare,
+// native-host-driven action.
+import type {
   GitmostBridge,
   GitmostCreatePagePayload,
   GitmostCreatePageResult,
   GitmostListPagesPayload,
   GitmostListPagesResult,
   GitmostListSpacesResult,
-  gitmostDecodePayloadToFile,
-  gitmostUploadFileToEditor,
 } from "@/features/editor/gitmost/gitmost-recording.ts";
 
 // How long to wait for a freshly-navigated page's editor to mount, become
@@ -57,7 +70,7 @@ function gitmostWaitForEditor(
         !editor.isDestroyed &&
         editor.isEditable &&
         editorPageId === pageId &&
-        yjsStatus === WebSocketStatus.Connected;
+        yjsStatus === YJS_STATUS_CONNECTED;
       if (ready) {
         resolve(editor);
         return;
@@ -171,6 +184,15 @@ export default function GitmostGlobalBridge() {
           };
         }
 
+        // Load the recording helpers on demand (see the import note above). This
+        // is the only place they are needed, so the @tiptap/editor-ext code they
+        // pull in stays out of the eager startup graph.
+        const {
+          gitmostDecodePayloadToFile,
+          gitmostUploadFileToEditor,
+          gitmostInsertTranscriptIntoEditor,
+        } = await import("@/features/editor/gitmost/gitmost-recording.ts");
+
         // Validate/decode the recording BEFORE creating the page so a bad
         // payload never leaves an empty junk page behind. Per the createPage
         // error contract, any decode failure collapses to "insert-failed" (the
@@ -281,6 +303,18 @@ export default function GitmostGlobalBridge() {
             pageId: page.id,
           };
         }
+
+        // Best-effort: append the transcript (heading + one paragraph per line)
+        // below the just-inserted audio node. The audio insert already
+        // succeeded, so a transcript failure must NOT turn this into an error —
+        // wrap it and, on any throw, log and still return ok. A missing/empty/
+        // non-string transcript is a no-op inside the helper (audio only).
+        try {
+          gitmostInsertTranscriptIntoEditor(editor, payload?.transcript);
+        } catch (err) {
+          console.error("[gitmost] transcript insert failed", err);
+        }
+
         return { ok: true, pageId: page.id };
       } catch (err: any) {
         console.error("[gitmost] createPageWithRecording failed", err);

apps/client/src/features/editor/gitmost/gitmost-recording.test.ts

@@ -0,0 +1,150 @@
+import { describe, it, expect } from "vitest";
+import { Editor } from "@tiptap/core";
+import { Document } from "@tiptap/extension-document";
+import { Paragraph } from "@tiptap/extension-paragraph";
+import { Text } from "@tiptap/extension-text";
+import { Heading } from "@tiptap/extension-heading";
+import { Bold } from "@tiptap/extension-bold";
+import { Italic } from "@tiptap/extension-italic";
+import { Link } from "@tiptap/extension-link";
+import { gitmostInsertTranscriptIntoEditor } from "./gitmost-recording.ts";
+
+const ZWSP = "​"; // U+200B, the helper's block-trigger neutralizer
+
+/**
+ * #377 — the web-side bridge must append the native host's transcript below the
+ * recording. These exercise the pure insert helper through a REAL Tiptap editor
+ * (Document/Paragraph/Text/Heading + Bold/Italic/Link marks so an HTML-parsing
+ * regression would be caught), asserting the resulting document rather than
+ * mocking the editor: transcript present -> "Transcript" heading + one paragraph
+ * per non-empty line; content is inserted as LITERAL TEXT (no HTML/markdown
+ * parsing); col-0 markdown block triggers are neutralized so git-sync keeps them
+ * paragraphs; absent/empty/non-string -> no-op.
+ */
+describe("gitmostInsertTranscriptIntoEditor", () => {
+  const makeEditor = () =>
+    new Editor({
+      // Bold/Italic/Link are registered specifically so that IF the helper ever
+      // regressed to inserting an HTML/markdown string (instead of a text node),
+      // TipTap would parse `<b>`/`*..*`/`[..](..)` into marks and the literal-
+      // text assertions below would fail.
+      extensions: [Document, Paragraph, Text, Heading, Bold, Italic, Link],
+      // Start from a single empty paragraph (a fresh page's baseline). The
+      // helper appends at the end of the doc, i.e. below existing content.
+      content: { type: "doc", content: [{ type: "paragraph" }] },
+    });
+
+  it("inserts a Transcript heading + one paragraph per non-empty line, verbatim", () => {
+    const editor = makeEditor();
+
+    const inserted = gitmostInsertTranscriptIntoEditor(
+      editor,
+      "You: hello there\nSpeaker 1: hi\n\nYou: bye",
+    );
+
+    expect(inserted).toBe(true);
+
+    const nodes = (editor.getJSON().content ?? []) as any[];
+    // A level-2 "Transcript" heading is present.
+    const heading = nodes.find((n) => n.type === "heading");
+    expect(heading?.attrs?.level).toBe(2);
+    expect(heading?.content?.[0]?.text).toBe("Transcript");
+
+    // Every non-empty transcript line becomes a paragraph, in order, verbatim;
+    // the blank line between them is dropped.
+    const texts = nodes
+      .filter((n) => n.type === "paragraph")
+      .map((n) => n.content?.[0]?.text)
+      .filter((t) => typeof t === "string");
+    expect(texts).toEqual(["You: hello there", "Speaker 1: hi", "You: bye"]);
+
+    editor.destroy();
+  });
+
+  it("inserts HTML + markdown metacharacters as LITERAL text (no injection / no mark parsing)", () => {
+    const editor = makeEditor();
+    const line =
+      "You: <b>bold</b> <script>alert(1)</script> and *stars* and [link](x)";
+
+    const inserted = gitmostInsertTranscriptIntoEditor(editor, line);
+    expect(inserted).toBe(true);
+
+    const paras = (editor.getJSON().content ?? []).filter(
+      (n: any) => n.type === "paragraph",
+    ) as any[];
+    // The transcript line is exactly ONE paragraph holding a SINGLE text node
+    // whose text is the verbatim string — not split into bold/link/other nodes,
+    // not carrying any marks, not raw HTML. This FAILS if the helper switched to
+    // insertContent(htmlString): TipTap would then parse <b>/[link](x)/*stars*.
+    const content = paras[paras.length - 1].content;
+    expect(content).toHaveLength(1);
+    expect(content[0].type).toBe("text");
+    expect(content[0].marks ?? []).toEqual([]);
+    expect(content[0].text).toBe(line);
+    // And no bold/italic/link mark exists anywhere in the document.
+    const html = editor.getHTML();
+    expect(html).not.toMatch(/<(strong|b|em|i|a)\b/);
+    // The angle brackets survived as escaped entities (literal text), not a live
+    // <script>/<b> element.
+    expect(html).not.toMatch(/<script/i);
+
+    editor.destroy();
+  });
+
+  it("neutralizes col-0 markdown block triggers with a leading ZWSP (git-sync safety)", () => {
+    const editor = makeEditor();
+    // Trigger lines (some with a leaked indent) + a normal prefixed line.
+    const inserted = gitmostInsertTranscriptIntoEditor(
+      editor,
+      [
+        "- dash",
+        "  > quote", // leading indent must be trimmed then neutralized
+        "# hash",
+        "1. one",
+        "> [!info] note",
+        "```js",
+        "---", // solid thematic break -> horizontalRule (text-losing) if unneutralized
+        "***",
+        "___",
+        "You: normal line",
+      ].join("\n"),
+    );
+    expect(inserted).toBe(true);
+
+    const texts = (editor.getJSON().content ?? [])
+      .filter((n: any) => n.type === "paragraph")
+      .map((n: any) => n.content?.[0]?.text)
+      .filter((t: any) => typeof t === "string") as string[];
+
+    // Every block-trigger line is prefixed with the invisible ZWSP (indent
+    // trimmed first); the normal `You:` line is left byte-exact.
+    expect(texts).toEqual([
+      ZWSP + "- dash",
+      ZWSP + "> quote",
+      ZWSP + "# hash",
+      ZWSP + "1. one",
+      ZWSP + "> [!info] note",
+      ZWSP + "```js",
+      ZWSP + "---",
+      ZWSP + "***",
+      ZWSP + "___",
+      "You: normal line",
+    ]);
+
+    editor.destroy();
+  });
+
+  it("is a no-op for undefined / empty / whitespace-only / non-string transcripts", () => {
+    for (const value of [undefined, "", "   \n  \n", 42, {}, null]) {
+      const editor = makeEditor();
+      const before = JSON.stringify(editor.getJSON());
+
+      const inserted = gitmostInsertTranscriptIntoEditor(editor, value as any);
+
+      expect(inserted).toBe(false);
+      // Document is untouched (audio-only behavior preserved).
+      expect(JSON.stringify(editor.getJSON())).toBe(before);
+      editor.destroy();
+    }
+  });
+});

apps/client/src/features/editor/gitmost/gitmost-recording.ts

@@ -65,6 +65,11 @@ export interface GitmostCreatePagePayload {
   base64: string;
   filename: string;
   mimeType: string;
+  // Optional transcript for the recording: plain text, `\n`-separated, each
+  // line already formatted as `You: ...` / `Speaker N: ...` by the native host
+  // (ready to insert, no parsing needed). Omitted (no speech / no models) ->
+  // audio only.
+  transcript?: string;
 }
 
 export interface GitmostCreatePageResult {
@@ -235,6 +240,83 @@ export async function gitmostUploadFileToEditor(
   }
 }
 
+// Zero-width space (U+200B). Prepended to a transcript line that begins with a
+// markdown BLOCK trigger: it is invisible in the rendered doc but shifts the
+// trigger off column 0, so the git-sync doc->markdown->doc round-trip keeps the
+// line a plain paragraph (see GITMOST_MD_BLOCK_TRIGGER_RE).
+const GITMOST_ZWSP = "​";
+
+// A markdown BLOCK-level construct that, sitting at column 0 of a paragraph
+// line, the git-sync markdown serializer (packages/prosemirror-markdown
+// markdown-converter.ts, `case "paragraph"`) would re-parse into a NON-paragraph
+// block on the doc->markdown->doc cycle. That serializer emits paragraph text
+// verbatim with NO block-escape (the pre-existing root cause), so a leading
+// `#`/`-`/`*`/`+`/`>`, an ordered-list `N.`/`N)`, a code fence ```/~~~, a table
+// `|`, or a `> [!info]` callout opener would silently become a heading / list /
+// quote / code block / table / callout. The final alternative matches a WHOLE-
+// LINE thematic break — solid `---`/`***`/`___` or spaced `- - -`/`_ _ _` (3+ of
+// the same `-`/`*`/`_`) — which round-trips into a `horizontalRule`; because
+// that node carries NO text, an un-neutralized separator line would LOSE its
+// text entirely (worse than the list/quote case). This matches a TRIMMED line's
+// start; the transcript's own `You:` / `Speaker N:` prefix begins with a letter
+// and never matches, so prefixed lines are left byte-exact.
+const GITMOST_MD_BLOCK_TRIGGER_RE =
+  /^(?:#{1,6}(?:\s|$)|[-*+](?:\s|$)|>|\d+[.)](?:\s|$)|```|~~~|\||([-*_])(?:\s*\1){2,}\s*$)/;
+
+// Append a transcript block BELOW the recording's audio node in a live editor:
+// a "Transcript" heading followed by one paragraph per non-empty transcript
+// line. The transcript is plain text, `\n`-separated, each line already
+// formatted as `You: ...` / `Speaker N: ...` by the native host — line text is
+// inserted as a TEXT node (never HTML/markdown), so there is no injection or
+// mark-parsing surface. Each kept line is trimmed (drops an indent that would
+// both leak into the display and, at col 0, form a markdown block trigger) and,
+// if it still begins with a col-0 markdown block trigger, gets an invisible
+// zero-width space prepended so the git-sync round-trip cannot turn it into a
+// list/quote/heading/callout/code/table (defensive boundary against the
+// serializer's missing block-escape). This is best-effort and meant to run
+// AFTER the audio has already been inserted; the caller must guard against a
+// throw so a transcript failure never fails the (already successful) recording.
+// Returns true when a block was inserted, false when there was nothing to
+// insert (transcript undefined/empty/not-a-string). A non-string value is a
+// no-op, not an error.
+export function gitmostInsertTranscriptIntoEditor(
+  editor: Editor,
+  transcript: unknown,
+): boolean {
+  if (typeof transcript !== "string") return false;
+  const lines = transcript
+    .split("\n")
+    // Trim each line and drop blank (whitespace-only) ones.
+    .map((line) => line.trim())
+    .filter((line) => line.length > 0)
+    // Neutralize a col-0 markdown block trigger with an invisible ZWSP so the
+    // git-sync round-trip keeps the line a paragraph. Host lines (`You:` /
+    // `Speaker N:`) never match and stay byte-exact.
+    .map((line) =>
+      GITMOST_MD_BLOCK_TRIGGER_RE.test(line) ? GITMOST_ZWSP + line : line,
+    );
+  if (lines.length === 0) return false;
+
+  const content = [
+    {
+      type: "heading",
+      attrs: { level: 2 },
+      content: [{ type: "text", text: "Transcript" }],
+    },
+    ...lines.map((line) => ({
+      type: "paragraph",
+      content: [{ type: "text", text: line }],
+    })),
+  ];
+
+  // Append at the end of the document. On a freshly-created recording page the
+  // audio node is the last block, so the end position places the transcript
+  // directly below it.
+  const endPos = editor.state.doc.content.size;
+  editor.chain().focus().insertContentAt(endPos, content).run();
+  return true;
+}
+
 // Full insert path used by the open-page bridge (insertRecording): guard the
 // editor, validate/decode the payload, then upload. Never throws — resolves to
 // a result code.

apps/client/src/features/editor/hooks/use-generate-page-title.test.tsx

@@ -33,10 +33,11 @@ vi.mock("@/lib/local-emitter.ts", () => ({
   default: { emit: (...args: unknown[]) => localEmitMock(...args) },
 }));
 
-// htmlToMarkdown just echoes the editor HTML so each test controls the markdown
-// purely via the fake page editor's getHTML().
-vi.mock("@docmost/editor-ext", () => ({
-  htmlToMarkdown: (html: string) => html,
+// convertProseMirrorToMarkdown echoes a marker carried on the fake editor's
+// getJSON() doc, so each test controls the markdown purely via the fake page
+// editor (issue #347: the hook now serializes editor JSON through the package).
+vi.mock("@docmost/prosemirror-markdown/browser", () => ({
+  convertProseMirrorToMarkdown: (doc: { __md?: string }) => doc?.__md ?? "",
 }));
 
 const notificationsShowMock = vi.fn();
@@ -53,10 +54,12 @@ import { useGeneratePageTitle } from "./use-generate-page-title.ts";
 
 // --- Test helpers -------------------------------------------------------------
 
-function makePageEditor(pageId: string, html = "<p>content</p>"): Editor {
+function makePageEditor(pageId: string, md = "content"): Editor {
   return {
     isDestroyed: false,
-    getHTML: () => html,
+    // The mocked convertProseMirrorToMarkdown reads `__md` back off this doc,
+    // so `md` is exactly the markdown the hook will send to the title service.
+    getJSON: () => ({ type: "doc", __md: md }),
     storage: { pageId },
   } as unknown as Editor;
 }

apps/client/src/features/editor/hooks/use-generate-page-title.ts

@@ -3,7 +3,7 @@ import { useMutation } from "@tanstack/react-query";
 import { useAtomValue } from "jotai";
 import { notifications } from "@mantine/notifications";
 import { useTranslation } from "react-i18next";
-import { htmlToMarkdown } from "@docmost/editor-ext";
+import { convertProseMirrorToMarkdown } from "@docmost/prosemirror-markdown/browser";
 import {
   pageEditorAtom,
   titleEditorAtom,
@@ -49,7 +49,9 @@ export function useGeneratePageTitle(pageId: string) {
     mutationFn: async () => {
       if (!pageEditor || pageEditor.isDestroyed) return;
 
-      const markdown = htmlToMarkdown(pageEditor.getHTML()).trim();
+      // Serialize the live editor content to markdown through the canonical
+      // converter (issue #347), matching the on-disk/export markdown form.
+      const markdown = convertProseMirrorToMarkdown(pageEditor.getJSON()).trim();
       if (!markdown) {
         notifications.show({ message: t("The note is empty"), color: "yellow" });
         return;

apps/client/src/features/editor/hooks/use-page-content-cache.test.ts

@@ -0,0 +1,100 @@
+import { describe, it, expect, vi, beforeEach, afterEach } from "vitest";
+import { renderHook, act } from "@testing-library/react";
+import type { MutableRefObject } from "react";
+import type { Editor } from "@tiptap/react";
+
+// Mock the app entry so importing the hook doesn't boot the whole app; the hook
+// only needs queryClient's cache read/write, which we stub here. Declared via
+// vi.hoisted so the spies exist before the hoisted vi.mock factory runs.
+const { getQueryData, setQueryData } = vi.hoisted(() => ({
+  getQueryData: vi.fn(() => undefined as unknown),
+  setQueryData: vi.fn(),
+}));
+vi.mock("@/main.tsx", () => ({
+  queryClient: { getQueryData, setQueryData },
+}));
+
+import { usePageContentCache } from "./use-page-content-cache";
+
+const SNAPSHOT = { type: "doc", content: [] };
+
+function makeFakeEditor(overrides: Partial<Editor> = {}): Editor {
+  return {
+    isEmpty: false,
+    isDestroyed: false,
+    getJSON: vi.fn(() => SNAPSHOT),
+    ...overrides,
+  } as unknown as Editor;
+}
+
+describe("usePageContentCache (#343 PART 3) — getJSON off the keystroke path", () => {
+  beforeEach(() => {
+    vi.useFakeTimers();
+    vi.clearAllMocks();
+    // A cached page exists so the write path runs.
+    getQueryData.mockReturnValue({ id: "p1", content: {} });
+  });
+  afterEach(() => {
+    vi.useRealTimers();
+  });
+
+  it("onUpdate (calling the debounced fn) does NOT call getJSON synchronously", () => {
+    const editor = makeFakeEditor();
+    const editorRef = { current: editor } as MutableRefObject<Editor | null>;
+
+    const { result } = renderHook(() =>
+      usePageContentCache(editorRef, "slug-1", 3000),
+    );
+
+    // Simulate a keystroke's onUpdate -> only schedules the debounce.
+    act(() => {
+      result.current();
+      result.current();
+      result.current();
+    });
+
+    // The whole-doc serialization must NOT have happened yet.
+    expect(editor.getJSON).not.toHaveBeenCalled();
+    expect(setQueryData).not.toHaveBeenCalled();
+
+    // Once the debounce window elapses, getJSON runs exactly once (not per call).
+    act(() => vi.advanceTimersByTime(3000));
+    expect(editor.getJSON).toHaveBeenCalledTimes(1);
+    expect(setQueryData).toHaveBeenCalledWith(["pages", "slug-1"], {
+      id: "p1",
+      content: SNAPSHOT,
+    });
+  });
+
+  it("flushes the pending snapshot on unmount so the last edit isn't lost", () => {
+    const editor = makeFakeEditor();
+    const editorRef = { current: editor } as MutableRefObject<Editor | null>;
+
+    const { result, unmount } = renderHook(() =>
+      usePageContentCache(editorRef, "slug-1", 3000),
+    );
+
+    act(() => result.current());
+    expect(editor.getJSON).not.toHaveBeenCalled();
+
+    // Navigation/unmount must flush (not drop) the pending write.
+    act(() => unmount());
+    expect(editor.getJSON).toHaveBeenCalledTimes(1);
+    expect(setQueryData).toHaveBeenCalledTimes(1);
+  });
+
+  it("skips the write when the editor is destroyed (flush racing teardown)", () => {
+    const editor = makeFakeEditor({ isDestroyed: true });
+    const editorRef = { current: editor } as MutableRefObject<Editor | null>;
+
+    const { result } = renderHook(() =>
+      usePageContentCache(editorRef, "slug-1", 3000),
+    );
+
+    act(() => result.current());
+    act(() => vi.advanceTimersByTime(3000));
+
+    expect(editor.getJSON).not.toHaveBeenCalled();
+    expect(setQueryData).not.toHaveBeenCalled();
+  });
+});

apps/client/src/features/editor/hooks/use-page-content-cache.ts

@@ -0,0 +1,50 @@
+import type { MutableRefObject } from "react";
+import { useDebouncedCallback } from "@mantine/hooks";
+import type { Editor } from "@tiptap/react";
+import { queryClient } from "@/main.tsx";
+import { IPage } from "@/features/page/types/page.types.ts";
+
+/**
+ * Off-keystroke local page-cache updater (issue #343, PART 3).
+ *
+ * The editor's `onUpdate` fires on every keystroke — and, under collaboration,
+ * on every REMOTE keystroke too. Serializing the WHOLE document with
+ * `editor.getJSON()` on that hot path is expensive, and the previous 3s debounce
+ * only guarded the cache WRITE, not the serialization: `getJSON()` still ran per
+ * keystroke.
+ *
+ * This hook moves the serialization INSIDE the debounced callback, so the
+ * full-doc traversal happens at most once per `delay`, not per keystroke. Call
+ * the returned function from `onUpdate` (it only schedules the debounce); the
+ * `getJSON()` snapshot is taken when the debounce fires.
+ *
+ * On unmount/navigation the pending snapshot is FLUSHED (via `flushOnUnmount`)
+ * so the last edits within the debounce window aren't lost from the local cache.
+ * The source of truth is collab/Yjs, but the cache must not go stale.
+ *
+ * IMPORTANT: call this hook BEFORE `useEditor`. React runs effect cleanups in
+ * declaration order on unmount, so the debounce's flush cleanup must be declared
+ * before `useEditor`'s teardown to run while the editor is still alive; the
+ * `isDestroyed` guard keeps a flush that still races teardown safe (it skips).
+ */
+export function usePageContentCache(
+  editorRef: MutableRefObject<Editor | null>,
+  slugId: string | undefined,
+  delay = 3000,
+) {
+  return useDebouncedCallback(
+    () => {
+      const e = editorRef.current;
+      if (!e || e.isDestroyed || e.isEmpty) return;
+      const pageData = queryClient.getQueryData<IPage>(["pages", slugId]);
+      if (pageData) {
+        // getJSON() (full-doc serialization) runs HERE, off the keystroke path.
+        queryClient.setQueryData(["pages", slugId], {
+          ...pageData,
+          content: e.getJSON(),
+        });
+      }
+    },
+    { delay, flushOnUnmount: true },
+  );
+}

apps/client/src/features/editor/page-editor.tsx

@@ -59,10 +59,10 @@ import {
   handlePaste,
 } from "@/features/editor/components/common/editor-paste-handler.tsx";
 import ExcalidrawMenu from "./components/excalidraw/excalidraw-menu-lazy";
-import DrawioMenu from "./components/drawio/drawio-menu";
+import DrawioMenu from "./components/drawio/drawio-menu-lazy";
 import { useCollabToken } from "@/features/auth/queries/auth-query.tsx";
 import SearchAndReplaceDialog from "@/features/editor/components/search-and-replace/search-and-replace-dialog.tsx";
-import { useDebouncedCallback, useDocumentVisibility } from "@mantine/hooks";
+import { useDocumentVisibility } from "@mantine/hooks";
 import { useIdle } from "@/hooks/use-idle.ts";
 import { queryClient } from "@/main.tsx";
 import { IPage } from "@/features/page/types/page.types.ts";
@@ -79,6 +79,7 @@ import { PageEditMode } from "@/features/user/types/user.types.ts";
 import { jwtDecode } from "jwt-decode";
 import { searchSpotlight } from "@/features/search/constants.ts";
 import { useEditorScroll } from "./hooks/use-editor-scroll";
+import { usePageContentCache } from "./hooks/use-page-content-cache";
 import { useScrollRestoreOnSwap } from "./hooks/use-scroll-position";
 import { useSwapHeightReservation } from "./hooks/use-swap-height-reservation";
 import { EditorLinkMenu } from "@/features/editor/components/link/link-menu";
@@ -93,6 +94,11 @@ import {
   isBodyEditable,
   isCollabSynced,
 } from "@/features/editor/editor-sync-state";
+import {
+  isVitalsActive,
+  measurePageOpen,
+  reportEditorTx,
+} from "@/lib/telemetry/vitals";
 
 interface PageEditorProps {
   pageId: string;
@@ -267,8 +273,13 @@ export default function PageEditor({
     }
   }, [isIdle, documentState, providersReady, resetIdle]);
 
-  // Attach here, to make sure the connection gets properly established
-  providersRef.current?.remote.attach();
+  // Attach the remote provider once it's ready (and again after a pageId swap
+  // recreates it) to make sure the connection gets properly established. This
+  // used to run in the render body — a side effect during render (#343, PART 7).
+  // `attach()` is idempotent, so re-running it on these deps is safe.
+  useEffect(() => {
+    providersRef.current?.remote.attach();
+  }, [providersReady, pageId]);
 
   const extensions = useMemo(() => {
     if (!providersReady || !providersRef.current || !currentUser?.user) {
@@ -283,6 +294,12 @@ export default function PageEditor({
     ];
   }, [providersReady, currentUser?.user]);
 
+  // getJSON() serialization + cache write live in the hook, off the keystroke
+  // path, and flush on unmount so the last snapshot survives navigation (#343).
+  // MUST be declared before useEditor: React runs effect cleanups in declaration
+  // order on unmount, so the flush must run before the editor is torn down.
+  const debouncedUpdateContent = usePageContentCache(editorRef, slugId);
+
   const editor = useEditor(
     {
       extensions,
@@ -351,13 +368,47 @@ export default function PageEditor({
           editor.storage.pageId = pageId;
           handleScrollTo(editor);
           editorRef.current = editor;
+
+          // #355 — perf instrumentation. Skip ALL of it when telemetry is
+          // disabled (F1 flag off) or this session isn't sampled: no page-open
+          // measure, and crucially NO dispatch wrapping, so a non-collecting
+          // session pays zero per-transaction cost.
+          if (isVitalsActive()) {
+            // page_open_ms: this is the first editor-content render, so measure
+            // against any page-open mark set on the tree-row/link click.
+            measurePageOpen();
+
+            // editor_tx_ms: time the SYNCHRONOUS part of applying each
+            // transaction (state.apply + updateState) by wrapping the view's
+            // dispatch. Only slow syncs (>8ms) are reported (see reportEditorTx),
+            // so the common path adds just one performance.now() pair. Passive:
+            // the original dispatch still runs unchanged.
+            try {
+              const view = editor.view as unknown as {
+                dispatch: (tr: unknown) => void;
+              };
+              const originalDispatch = view.dispatch.bind(view);
+              view.dispatch = (tr: unknown) => {
+                const started = performance.now();
+                originalDispatch(tr);
+                const elapsed = performance.now() - started;
+                try {
+                  reportEditorTx(elapsed, editor.state.doc.content.size);
+                } catch {
+                  // never let telemetry break editing
+                }
+              };
+            } catch {
+              // if the view shape changes, skip editor_tx instrumentation
+            }
+          }
         }
       },
-      onUpdate({ editor }) {
-        if (editor.isEmpty) return;
-        const editorJson = editor.getJSON();
-        //update local page cache to reduce flickers
-        debouncedUpdateContent(editorJson);
+      onUpdate() {
+        // Only schedule the debounce here — the whole-doc getJSON() serialization
+        // happens INSIDE the debounced callback (see usePageContentCache), so it
+        // no longer runs synchronously on every (local or remote) keystroke.
+        debouncedUpdateContent();
       },
     },
     [pageId, editable, extensions],
@@ -403,17 +454,6 @@ export default function PageEditor({
     };
   }, [editor, pageId, editorIsEditable]);
 
-  const debouncedUpdateContent = useDebouncedCallback((newContent: any) => {
-    const pageData = queryClient.getQueryData<IPage>(["pages", slugId]);
-
-    if (pageData) {
-      queryClient.setQueryData(["pages", slugId], {
-        ...pageData,
-        content: newContent,
-      });
-    }
-  }, 3000);
-
   const handleActiveCommentEvent = (event) => {
     const { commentId, resolved } = event.detail;
 

apps/client/src/features/editor/utils/get-editor-selection.test.ts

@@ -0,0 +1,113 @@
+import { describe, it, expect } from "vitest";
+import { Editor } from "@tiptap/core";
+import { Document } from "@tiptap/extension-document";
+import { Paragraph } from "@tiptap/extension-paragraph";
+import { Text } from "@tiptap/extension-text";
+import { EditorState, TextSelection } from "@tiptap/pm/state";
+import type { Node as PMNode } from "@tiptap/pm/model";
+import { UniqueID } from "@docmost/editor-ext";
+import { getEditorSelectionContext } from "./get-editor-selection";
+
+/**
+ * Unit tests for getEditorSelectionContext (#388). Built on a headless
+ * ProseMirror schema (Document + Paragraph + Text + the block-id UniqueID
+ * extension), mirroring the editor-ext test style. We assemble docs with
+ * explicit block ids so the covered-blockIds assertions are deterministic.
+ */
+
+// A schema that carries the `id` block attribute (UniqueID) on paragraphs, just
+// like the real editor.
+const { schema } = new Editor({
+  extensions: [
+    Document,
+    Paragraph,
+    Text,
+    UniqueID.configure({ types: ["paragraph"] }),
+  ],
+  content: "",
+});
+
+function docOf(blocks: { id: string; text: string }[]): PMNode {
+  return schema.node(
+    "doc",
+    null,
+    blocks.map((b) =>
+      schema.node("paragraph", { id: b.id }, b.text ? schema.text(b.text) : []),
+    ),
+  );
+}
+
+function stateWith(doc: PMNode, from: number, to: number): EditorState {
+  const base = EditorState.create({ schema, doc });
+  return base.apply(base.tr.setSelection(TextSelection.create(doc, from, to)));
+}
+
+// Select every text position of the doc (pos 1 .. content.size - 1).
+function selectAll(doc: PMNode): EditorState {
+  return stateWith(doc, 1, doc.content.size - 1);
+}
+
+describe("getEditorSelectionContext", () => {
+  it("returns null for an empty (collapsed) selection", () => {
+    const doc = docOf([{ id: "b1", text: "Hello world" }]);
+    const state = stateWith(doc, 3, 3); // caret, from === to
+    expect(getEditorSelectionContext(state)).toBeNull();
+  });
+
+  it("returns null for the default caret-at-start of a fresh editor", () => {
+    const editor = new Editor({
+      extensions: [
+        Document,
+        Paragraph,
+        Text,
+        UniqueID.configure({ types: ["paragraph"] }),
+      ],
+      content: "<p>fresh</p>",
+    });
+    expect(getEditorSelectionContext(editor.state)).toBeNull();
+    editor.destroy();
+  });
+
+  it("reads a single-paragraph selection with no block-separator artifacts", () => {
+    const doc = docOf([{ id: "b1", text: "Hello world" }]);
+    const sel = getEditorSelectionContext(selectAll(doc))!;
+    expect(sel.text).toBe("Hello world");
+    expect(sel.blockIds).toEqual(["b1"]);
+    expect(sel.truncated).toBeUndefined();
+  });
+
+  it("joins multiple blocks with a newline and collects all covered blockIds", () => {
+    const doc = docOf([
+      { id: "b1", text: "First" },
+      { id: "b2", text: "Second" },
+    ]);
+    const sel = getEditorSelectionContext(selectAll(doc))!;
+    expect(sel.text).toBe("First\nSecond");
+    expect(sel.blockIds).toEqual(["b1", "b2"]);
+  });
+
+  it("caps the text at 2000 chars and flags truncated", () => {
+    const doc = docOf([{ id: "b1", text: "x".repeat(2500) }]);
+    const sel = getEditorSelectionContext(selectAll(doc))!;
+    expect(sel.text).toHaveLength(2000);
+    expect(sel.truncated).toBe(true);
+  });
+
+  it("computes before/after context and clamps it to the doc bounds", () => {
+    // One paragraph "0123456789abcdefghij"; select the middle "56789".
+    const doc = docOf([{ id: "b1", text: "0123456789abcdefghij" }]);
+    // text char i lives at pos (1 + i); select chars index 5..9 -> pos 6..11.
+    const sel = getEditorSelectionContext(stateWith(doc, 6, 11))!;
+    expect(sel.text).toBe("56789");
+    expect(sel.before).toBe("01234");
+    expect(sel.after).toBe("abcdefghij");
+  });
+
+  it("omits before/after at the document boundaries (never reads past 0/size)", () => {
+    const doc = docOf([{ id: "b1", text: "Edge" }]);
+    const sel = getEditorSelectionContext(selectAll(doc))!;
+    // Selection spans the whole single block: nothing before or after it.
+    expect(sel.before).toBeUndefined();
+    expect(sel.after).toBeUndefined();
+  });
+});

apps/client/src/features/editor/utils/get-editor-selection.ts

@@ -0,0 +1,71 @@
+import type { EditorState } from "@tiptap/pm/state";
+
+export interface EditorSelectionContext {
+  text: string;
+  truncated?: boolean;
+  blockIds?: string[];
+  before?: string;
+  after?: string;
+}
+
+// Client-side caps. The server re-caps every field independently (defence in
+// depth — the payload is attacker-controllable), so these only keep the wire
+// small for the common case.
+const TEXT_CAP = 2000;
+const CONTEXT_CHARS = 160;
+const MAX_BLOCK_IDS = 20;
+
+// Pure: takes an EditorState so it is unit-testable with a headless editor.
+// Snapshots the user's current selection into the wire shape carried inside
+// openPage — plain text + the ids of the blocks it covers + a little surrounding
+// context. Returns null when nothing meaningful is selected.
+//
+// Deliberately does NOT emit the ProseMirror positions (from/to): they rot the
+// instant the document changes and the server tools address content by block id
+// + text (getNode / editPageText find-replace), never by position.
+export function getEditorSelectionContext(
+  state: EditorState,
+): EditorSelectionContext | null {
+  const { selection, doc } = state;
+  // An empty selection (incl. the default caret-at-start of a fresh editor) is
+  // never a "this"/"here" — bail before reading any text.
+  if (selection.empty) return null;
+
+  const { from, to } = selection;
+
+  let text = doc.textBetween(from, to, "\n");
+  let truncated = false;
+  if (text.length > TEXT_CAP) {
+    text = text.slice(0, TEXT_CAP);
+    truncated = true;
+  }
+  // A selection spanning only non-text nodes (e.g. an image) trims to empty ->
+  // treat as no selection.
+  if (text.trim().length === 0) return null;
+
+  // Ids of every block the selection covers, deduped and capped. These bridge
+  // the plain-text selection to the server tools (getNode / editPageText).
+  const blockIds: string[] = [];
+  doc.nodesBetween(from, to, (node) => {
+    const id = node.isBlock ? node.attrs?.id : undefined;
+    if (typeof id === "string" && id.length > 0 && !blockIds.includes(id)) {
+      blockIds.push(id);
+    }
+  });
+
+  // ~160 chars of plain text on each side, clamped to the document bounds, so
+  // editPageText can disambiguate a duplicate of the selected text.
+  const before = doc.textBetween(Math.max(0, from - CONTEXT_CHARS), from, "\n");
+  const after = doc.textBetween(
+    to,
+    Math.min(doc.content.size, to + CONTEXT_CHARS),
+    "\n",
+  );
+
+  const result: EditorSelectionContext = { text };
+  if (truncated) result.truncated = true;
+  if (blockIds.length > 0) result.blockIds = blockIds.slice(0, MAX_BLOCK_IDS);
+  if (before.length > 0) result.before = before;
+  if (after.length > 0) result.after = after;
+  return result;
+}

apps/client/src/features/favorite/queries/favorite-query.ts

@@ -24,7 +24,6 @@ export function useFavoritesQuery(type?: FavoriteType, spaceId?: string) {
     initialPageParam: undefined as string | undefined,
     getNextPageParam: (lastPage) =>
       lastPage.meta.hasNextPage ? lastPage.meta.nextCursor : undefined,
-    refetchOnMount: true,
   });
 }
 
@@ -32,7 +31,6 @@ export function useFavoriteIds(type: FavoriteType, spaceId?: string): Set<string
   const { data } = useQuery({
     queryKey: ["favorite-ids", type, spaceId],
     queryFn: () => getFavoriteIds(type, spaceId),
-    refetchOnMount: true,
   });
 
   const items = data?.items;

apps/client/src/features/page-details/components/page-details-aside.tsx

@@ -12,7 +12,7 @@ import { useAtomValue } from "jotai";
 import { useParams } from "react-router-dom";
 import { useTranslation } from "react-i18next";
 import { extractPageSlugId } from "@/lib";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
 import { pageEditorAtom } from "@/features/editor/atoms/editor-atoms.ts";
 import { useBacklinksCountQuery } from "@/features/page-details/queries/backlinks-query.ts";
 import { BacklinksModal } from "./backlinks-modal";
@@ -23,7 +23,7 @@ import { LabelsSection } from "@/features/label/components/labels-section.tsx";
 
 export function PageDetailsAside() {
   const { pageSlug } = useParams();
-  const { data: page } = usePageQuery({
+  const { data: page } = usePageMetaQuery({
     pageId: extractPageSlugId(pageSlug),
   });
   const pageEditor = useAtomValue(pageEditorAtom);

apps/client/src/features/page/components/breadcrumbs/breadcrumb-path-equal.test.ts

@@ -0,0 +1,53 @@
+import { describe, it, expect, vi } from "vitest";
+import { SpaceTreeNode } from "@/features/page/tree/types";
+
+// breadcrumb.tsx transitively imports @/main.tsx (via usePageMetaQuery ->
+// queryClient), whose module body calls ReactDOM.createRoot on a null root in
+// jsdom. Stub it so importing the pure helper under test doesn't run that
+// (breadcrumbPathEqual does not use queryClient, so a dummy is enough).
+vi.mock("@/main.tsx", () => ({ queryClient: {} }));
+
+import { breadcrumbPathEqual } from "./breadcrumb";
+
+// breadcrumbPathEqual is the ONLY point where a false-positive equality would
+// leave a stale/incorrect breadcrumb trail on screen: it decides whether the
+// selectAtom hands back the same reference (no re-render) for the ancestor chain.
+// Pin both directions — a too-loose equality goes stale on a rename; a too-tight
+// one loses the perf win.
+const node = (over: Partial<SpaceTreeNode>): SpaceTreeNode =>
+  ({ id: "a", slugId: "sa", name: "A", icon: "📄", ...over }) as SpaceTreeNode;
+
+describe("breadcrumbPathEqual", () => {
+  it("both null → true", () => {
+    expect(breadcrumbPathEqual(null, null)).toBe(true);
+  });
+
+  it("same reference → true", () => {
+    const p = [node({})];
+    expect(breadcrumbPathEqual(p, p)).toBe(true);
+  });
+
+  it("equal by id/slugId/name/icon (different arrays) → true", () => {
+    expect(breadcrumbPathEqual([node({})], [node({})])).toBe(true);
+  });
+
+  it("one side null → false", () => {
+    expect(breadcrumbPathEqual([node({})], null)).toBe(false);
+    expect(breadcrumbPathEqual(null, [node({})])).toBe(false);
+  });
+
+  it("different length → false", () => {
+    expect(
+      breadcrumbPathEqual([node({})], [node({}), node({ id: "b" })]),
+    ).toBe(false);
+  });
+
+  it.each(["name", "icon", "slugId", "id"] as const)(
+    "a changed %s → false (breadcrumb must re-render)",
+    (field) => {
+      expect(
+        breadcrumbPathEqual([node({})], [node({ [field]: "CHANGED" })]),
+      ).toBe(false);
+    },
+  );
+});

apps/client/src/features/page/components/breadcrumbs/breadcrumb.tsx

@@ -1,7 +1,9 @@
 import { useAtomValue } from "jotai";
+import { selectAtom } from "jotai/utils";
 import { treeDataAtom } from "@/features/page/tree/atoms/tree-data-atom.ts";
-import React, { useCallback, useEffect, useState } from "react";
+import React, { useCallback, useEffect, useMemo, useState } from "react";
 import { computeBreadcrumbState } from "./breadcrumb.utils";
+import { findBreadcrumbPath } from "@/features/page/tree/utils";
 import {
   Button,
   Anchor,
@@ -18,7 +20,7 @@ import { SpaceTreeNode } from "@/features/page/tree/types.ts";
 import { IPage } from "@/features/page/types/page.types.ts";
 import { buildPageUrl } from "@/features/page/page.utils.ts";
 import {
-  usePageQuery,
+  usePageMetaQuery,
   usePageBreadcrumbsQuery,
 } from "@/features/page/queries/page-query.ts";
 import { extractPageSlugId } from "@/lib";
@@ -32,39 +34,84 @@ function getTitle(name: string, icon: string) {
   return name;
 }
 
+/**
+ * Equality over a breadcrumb chain by the only fields the breadcrumb renders
+ * (id, slugId, name, icon). Lets the selectAtom below hand back the SAME
+ * reference when an unrelated tree mutation leaves THIS page's ancestor chain
+ * visually unchanged, so the breadcrumb no longer re-renders on every tree
+ * event (it previously subscribed to the whole treeDataAtom).
+ */
+export function breadcrumbPathEqual(
+  a: SpaceTreeNode[] | null,
+  b: SpaceTreeNode[] | null,
+): boolean {
+  if (a === b) return true;
+  if (!a || !b || a.length !== b.length) return false;
+  for (let i = 0; i < a.length; i++) {
+    if (
+      a[i].id !== b[i].id ||
+      a[i].slugId !== b[i].slugId ||
+      a[i].name !== b[i].name ||
+      a[i].icon !== b[i].icon
+    ) {
+      return false;
+    }
+  }
+  return true;
+}
+
 export default function Breadcrumb() {
   const { t } = useTranslation();
-  const treeData = useAtomValue(treeDataAtom);
   const [breadcrumbNodes, setBreadcrumbNodes] = useState<
     SpaceTreeNode[] | null
   >(null);
   const { pageSlug, spaceSlug } = useParams();
-  const { data: currentPage } = usePageQuery({
+  const { data: currentPage } = usePageMetaQuery({
     pageId: extractPageSlugId(pageSlug),
   });
+  const currentPageId = currentPage?.id;
   // The page's own ancestor chain, fetched independently of the lazily-built
   // sidebar tree so a deep page doesn't render a blank breadcrumb for seconds
   // while the tree backfills (#218).
-  const { data: ancestors } = usePageBreadcrumbsQuery(currentPage?.id);
+  const { data: ancestors } = usePageBreadcrumbsQuery(currentPageId);
   const isMobile = useMediaQuery("(max-width: 48em)");
 
+  // Narrowed subscription: instead of subscribing to the whole treeDataAtom and
+  // recomputing on every tree event, derive ONLY the current page's ancestor
+  // chain. The custom equality returns the previous reference when that chain is
+  // visually unchanged, so an unrelated tree mutation no longer re-renders this
+  // component. Mirrors computeBreadcrumbState's tree-hit branch
+  // (findBreadcrumbPath); the tree-miss/ancestors fallback is applied below.
+  const treePathAtom = useMemo(
+    () =>
+      selectAtom(
+        treeDataAtom,
+        (tree): SpaceTreeNode[] | null =>
+          currentPageId ? findBreadcrumbPath(tree, currentPageId) : null,
+        breadcrumbPathEqual,
+      ),
+    [currentPageId],
+  );
+  const treePath = useAtomValue(treePathAtom);
+
   useEffect(() => {
     if (!currentPage) return;
 
     // Selection/mapping + stale-clearing live in a pure, unit-tested helper
-    // (#218). It resolves the correct chain when possible and, on a transient
-    // miss, clears a chain left over from a previously-viewed page instead of
-    // showing the wrong trail — while keeping a chain already resolved for THIS
-    // page to avoid a blank flash.
+    // (#218). The tree-hit chain (treePath) always wins when present; otherwise
+    // fall back to the page's own ancestors and the stale-clearing logic — this
+    // reproduces computeBreadcrumbState(fullTree, ancestors, …) exactly, since
+    // its tree-hit branch is precisely findBreadcrumbPath(fullTree, pageId).
     setBreadcrumbNodes((previous) =>
+      treePath ??
       computeBreadcrumbState(
-        treeData,
+        null,
         ancestors as IPage[] | undefined,
         currentPage.id,
         previous,
       ),
     );
-  }, [currentPage?.id, treeData, ancestors]);
+  }, [currentPage?.id, treePath, ancestors]);
 
   const HiddenNodesTooltipContent = () =>
     breadcrumbNodes?.slice(1, -1).map((node) => (

apps/client/src/features/page/components/header/page-header-menu.tsx

@@ -24,7 +24,7 @@ import { historyAtoms } from "@/features/page-history/atoms/history-atoms.ts";
 import { useDisclosure, useHotkeys } from "@mantine/hooks";
 import { useClipboard } from "@/hooks/use-clipboard";
 import { useParams } from "react-router-dom";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
 import {
   useToggleTemporaryMutation,
   syncTemporaryExpiresInCache,
@@ -37,7 +37,7 @@ import { useTreeMutation } from "@/features/page/tree/hooks/use-tree-mutation.ts
 import { PageWidthToggle } from "@/features/user/components/page-width-pref.tsx";
 import { Trans, useTranslation } from "react-i18next";
 import ExportModal from "@/components/common/export-modal";
-import { htmlToMarkdown } from "@docmost/editor-ext";
+import { convertProseMirrorToMarkdown } from "@docmost/prosemirror-markdown/browser";
 import {
   pageEditorAtom,
   yjsConnectionStatusAtom,
@@ -67,7 +67,7 @@ export default function PageHeaderMenu({ readOnly }: PageHeaderMenuProps) {
   const commentsTriggerProps = useAsideTriggerProps("comments");
   const tocTriggerProps = useAsideTriggerProps("toc");
   const { pageSlug } = useParams();
-  const { data: page } = usePageQuery({
+  const { data: page } = usePageMetaQuery({
     pageId: extractPageSlugId(pageSlug),
   });
   const isDeleted = !!page?.deletedAt;
@@ -146,7 +146,7 @@ function PageActionMenu({ readOnly }: PageActionMenuProps) {
   const [, setHistoryModalOpen] = useAtom(historyAtoms);
   const clipboard = useClipboard({ timeout: 500 });
   const { pageSlug, spaceSlug } = useParams();
-  const { data: page, isLoading } = usePageQuery({
+  const { data: page, isLoading } = usePageMetaQuery({
     pageId: extractPageSlugId(pageSlug),
   });
   const { handleDelete } = useTreeMutation(page?.spaceId ?? "");
@@ -199,8 +199,9 @@ function PageActionMenu({ readOnly }: PageActionMenuProps) {
 
   const handleCopyAsMarkdown = () => {
     if (!pageEditor) return;
-    const html = pageEditor.getHTML();
-    const markdown = htmlToMarkdown(html);
+    // Copy the page as canonical markdown through the shared converter (issue
+    // #347), so "Copy as markdown" matches the server export byte-for-byte.
+    const markdown = convertProseMirrorToMarkdown(pageEditor.getJSON());
     const title = page?.title ? `# ${page.title}\n\n` : "";
     clipboard.copy(`${title}${markdown}`);
     notifications.show({ message: t("Copied") });

apps/client/src/features/page/components/temporary-note-banner.tsx

@@ -10,7 +10,7 @@ import { IconClockHour4, IconTrash } from "@tabler/icons-react";
 import { useState } from "react";
 import { Trans, useTranslation } from "react-i18next";
 import { useTimeAgo } from "@/hooks/use-time-ago.tsx";
-import { usePageQuery } from "@/features/page/queries/page-query.ts";
+import { usePageMetaQuery } from "@/features/page/queries/page-query.ts";
 import { useTreeMutation } from "@/features/page/tree/hooks/use-tree-mutation.ts";
 import {
   useToggleTemporaryMutation,
@@ -35,7 +35,7 @@ type TemporaryNoteBannerProps = {
  */
 export function TemporaryNoteBanner({ slugId }: TemporaryNoteBannerProps) {
   const { t } = useTranslation();
-  const { data: page } = usePageQuery({ pageId: slugId });
+  const { data: page } = usePageMetaQuery({ pageId: slugId });
   const { data: space } = useGetSpaceBySlugQuery(page?.space?.slug);
   const spaceAbility = useSpaceAbility(space?.membership?.permissions);
   const expiresTimeAgo = useTimeAgo(page?.temporaryExpiresAt);

apps/client/src/features/page/queries/invalidate-on-update-page.test.ts

@@ -0,0 +1,149 @@
+import { describe, it, expect, beforeEach, vi } from "vitest";
+import type { IPage } from "@/features/page/types/page.types";
+
+// A fresh QueryClient stands in for the app singleton (importing the real
+// @/main.tsx would run ReactDOM.createRoot, which has no DOM root in jsdom). The
+// factory constructs it (QueryClient can't be referenced in vi.hoisted — that
+// runs before imports resolve); we import the SAME mocked instance back to seed
+// and assert on it.
+vi.mock("@/main.tsx", async () => {
+  const { QueryClient } = await import("@tanstack/react-query");
+  return { queryClient: new QueryClient() };
+});
+
+import { queryClient as h_qc } from "@/main.tsx";
+import { invalidateOnUpdatePage } from "./page-query";
+
+const h = { qc: h_qc };
+
+// invalidateOnUpdatePage is the field-only (title/icon) tree path: instead of a
+// blanket invalidate it patches the affected node IN PLACE in every cached embed
+// subtree. The undefined-guard is LOAD-BEARING: a title-only socket event carries
+// icon:undefined, and without the guard `{...p, icon: undefined}` would WIPE the
+// icon in every cached subtree.
+const page = (over: Partial<IPage>): IPage =>
+  ({ id: "p1", title: "Old", icon: "📄", spaceId: "s1" }) as IPage &
+    typeof over as IPage;
+
+describe("invalidateOnUpdatePage — pointwise embed-cache patch", () => {
+  beforeEach(() => {
+    h.qc.clear();
+  });
+
+  it("title-only event updates title but PRESERVES the icon (undefined-guard)", () => {
+    const key = ["page-tree", "parent-1"];
+    h.qc.setQueryData<IPage[]>(key, [
+      { id: "p1", title: "Old", icon: "📄", spaceId: "s1" } as IPage,
+      { id: "p2", title: "Other", icon: "📁", spaceId: "s1" } as IPage,
+    ]);
+
+    // icon passed as undefined (a title-only update)
+    invalidateOnUpdatePage(
+      "s1",
+      "parent-1",
+      "p1",
+      "New Title",
+      undefined as unknown as string,
+    );
+
+    const patched = h.qc.getQueryData<IPage[]>(key)!;
+    const p1 = patched.find((p) => p.id === "p1")!;
+    const p2 = patched.find((p) => p.id === "p2")!;
+    expect(p1.title).toBe("New Title");
+    expect(p1.icon).toBe("📄"); // preserved, not wiped
+    // Sibling node untouched.
+    expect(p2.title).toBe("Other");
+    expect(p2.icon).toBe("📁");
+  });
+
+  it("icon-only event updates icon but preserves the title", () => {
+    const key = ["page-tree", "parent-1"];
+    h.qc.setQueryData<IPage[]>(key, [
+      { id: "p1", title: "Keep", icon: "📄", spaceId: "s1" } as IPage,
+    ]);
+
+    invalidateOnUpdatePage(
+      "s1",
+      "parent-1",
+      "p1",
+      undefined as unknown as string,
+      "🚀",
+    );
+
+    const p1 = h.qc.getQueryData<IPage[]>(key)!.find((p) => p.id === "p1")!;
+    expect(p1.icon).toBe("🚀");
+    expect(p1.title).toBe("Keep");
+  });
+
+  // The sidebar-pages cache (InfiniteData) is patched on the same event. It must
+  // carry the SAME undefined-guard as the embed path above — otherwise a
+  // title-only event's icon:undefined would wipe the sidebar entry's icon.
+  const sidebarKey = ["sidebar-pages", { pageId: "parent-1", spaceId: "s1" }];
+  const seedSidebar = () =>
+    h.qc.setQueryData(sidebarKey, {
+      pageParams: [undefined],
+      pages: [
+        {
+          items: [
+            { id: "p1", title: "Old", icon: "📄", spaceId: "s1" } as IPage,
+            { id: "p2", title: "Other", icon: "📁", spaceId: "s1" } as IPage,
+          ],
+        },
+      ],
+    });
+  const sidebarItem = (id: string) => {
+    const data = h.qc.getQueryData(sidebarKey) as {
+      pages: { items: IPage[] }[];
+    };
+    return data.pages[0].items.find((p) => p.id === id)!;
+  };
+
+  it("sidebar cache: title-only event updates title but PRESERVES the icon", () => {
+    seedSidebar();
+
+    invalidateOnUpdatePage(
+      "s1",
+      "parent-1",
+      "p1",
+      "New Title",
+      undefined as unknown as string,
+    );
+
+    const p1 = sidebarItem("p1");
+    expect(p1.title).toBe("New Title");
+    expect(p1.icon).toBe("📄"); // preserved, not wiped
+    // Sibling untouched.
+    const p2 = sidebarItem("p2");
+    expect(p2.title).toBe("Other");
+    expect(p2.icon).toBe("📁");
+  });
+
+  it("sidebar cache: icon-only event updates icon but PRESERVES the title", () => {
+    seedSidebar();
+
+    invalidateOnUpdatePage(
+      "s1",
+      "parent-1",
+      "p1",
+      undefined as unknown as string,
+      "🚀",
+    );
+
+    const p1 = sidebarItem("p1");
+    expect(p1.icon).toBe("🚀");
+    expect(p1.title).toBe("Old"); // preserved, not wiped
+  });
+
+  it("does not touch a subtree that lacks the updated node", () => {
+    const otherKey = ["page-tree", "unrelated"];
+    const before = [
+      { id: "x1", title: "X", icon: "❌", spaceId: "s1" } as IPage,
+    ];
+    h.qc.setQueryData<IPage[]>(otherKey, before);
+
+    invalidateOnUpdatePage("s1", "parent-1", "p1", "New", "🚀");
+
+    // Same reference back — the subtree without p1 is left as-is.
+    expect(h.qc.getQueryData<IPage[]>(otherKey)).toBe(before);
+  });
+});

apps/client/src/features/page/queries/page-query.ts

@@ -51,6 +51,10 @@ export function usePageQuery(
     queryFn: () => getPageById(pageInput),
     enabled: !!pageInput.pageId,
     staleTime: 5 * 60 * 1000,
+    // Keep the previously-loaded page visible while navigating to a new one
+    // instead of flashing a blank/skeleton frame (the new page's content
+    // streams in when ready). isLoading stays true only for the very first load.
+    placeholderData: keepPreviousData,
   });
 
   useEffect(() => {
@@ -66,6 +70,61 @@ export function usePageQuery(
   return query;
 }
 
+/**
+ * A page view that omits the large, frequently-changing `content` field. Every
+ * other field is preserved, so consumers that read only metadata (title, icon,
+ * permissions, id, creator, timestamps, …) keep working unchanged.
+ */
+export type IPageMeta = Omit<IPage, "content">;
+
+function selectPageMeta(page: IPage): IPageMeta {
+  // Drop `content`; react-query's structural sharing (replaceEqualDeep) then
+  // returns the SAME reference whenever the remaining fields are unchanged, so a
+  // pure content churn (typing / debouncedUpdateContent, collab `page.updated`)
+  // no longer changes this slice's identity and its ~13 subscribers don't
+  // re-render on every keystroke wave.
+  const { content: _content, ...meta } = page;
+  return meta as IPageMeta;
+}
+
+/**
+ * Metadata-only variant of {@link usePageQuery}. Shares the SAME query cache
+ * entry (`["pages", pageId]`, full object incl. content), but this hook returns
+ * a stable content-less slice so peripheral subscribers stop re-rendering on
+ * every content update. Use it anywhere the full `content` is not read.
+ */
+export function usePageMetaQuery(
+  pageInput: Partial<IPageInput>,
+): UseQueryResult<IPageMeta, Error> {
+  const query = useQuery({
+    queryKey: ["pages", pageInput.pageId],
+    queryFn: () => getPageById(pageInput),
+    enabled: !!pageInput.pageId,
+    staleTime: 5 * 60 * 1000,
+    select: selectPageMeta,
+    // Match usePageQuery: keep the previous page's metadata visible while
+    // navigating so the periphery (header, breadcrumb, …) doesn't flash blank.
+    placeholderData: keepPreviousData,
+  });
+
+  // Mirror usePageQuery's cross-key alias write so a page fetched by one
+  // identifier is also cached under the other. The cache stores the FULL page
+  // (select only narrows what THIS hook returns), so read the full object back
+  // from the cache and alias THAT — never the content-less slice.
+  useEffect(() => {
+    if (!query.data) return;
+    const full = queryClient.getQueryData<IPage>(["pages", pageInput.pageId]);
+    if (!full) return;
+    if (isValidUuid(pageInput.pageId)) {
+      queryClient.setQueryData(["pages", full.slugId], full);
+    } else {
+      queryClient.setQueryData(["pages", full.id], full);
+    }
+  }, [query.data]);
+
+  return query;
+}
+
 export function useCreatePageMutation() {
   const { t } = useTranslation();
   return useMutation<IPage, Error, Partial<IPageInput>>({
@@ -351,6 +410,12 @@ export function useRecentChangesQuery(spaceId?: string) {
     initialPageParam: undefined as string | undefined,
     getNextPageParam: (lastPage) =>
       lastPage.meta.hasNextPage ? lastPage.meta.nextCursor : undefined,
+    // KEEP refetchOnMount:true (against the global default false): recent-changes
+    // IS invalidated on page create/update/move/delete, but invalidateQueries only
+    // marks an UNMOUNTED query stale — it doesn't refetch it. The widget isn't
+    // always mounted, so an event that lands while it's unmounted leaves it stale,
+    // and the global refetchOnMount:false would not re-fetch on remount. The mount
+    // refetch closes that gap.
     refetchOnMount: true,
   });
 }
@@ -367,6 +432,9 @@ export function useCreatedByQuery(params?: {
     initialPageParam: undefined as string | undefined,
     getNextPageParam: (lastPage) =>
       lastPage.meta.hasNextPage ? lastPage.meta.nextCursor : undefined,
+    // KEEP refetchOnMount:true: the "created-by" key is never invalidated (no
+    // socket/mutation path), so the mount refetch is its ONLY freshness mechanism
+    // — without it the list shows stale cache on navigation.
     refetchOnMount: true,
   });
 }
@@ -380,8 +448,14 @@ export function useDeletedPagesQuery(
     queryFn: () => getDeletedPages(spaceId, params),
     enabled: !!spaceId,
     placeholderData: keepPreviousData,
-    refetchOnMount: true,
     staleTime: 0,
+    // KEEP refetchOnMount:true: ["trash-list"] IS invalidated by the
+    // move-to-trash / delete / restore mutations, but invalidateQueries only marks
+    // an unmounted query stale — it doesn't refetch it. The trash panel isn't
+    // usually mounted when a page is trashed, so on opening it the global
+    // refetchOnMount:false would show a stale list; the mount refetch closes that.
+    // (Do NOT remove the three trash-list invalidations — they are not dead code.)
+    refetchOnMount: true,
   });
 }
 
@@ -516,7 +590,35 @@ export function invalidateOnUpdatePage(
   title: string,
   icon: string,
 ) {
-  invalidatePageTree();
+  // Scoped page-tree refresh (was a blanket `invalidatePageTree()`): this is the
+  // FIELD-only update path (title/icon — no structural change), and the sidebar
+  // tree is already updated pointwise (applyUpdateOne / optimistic setData) plus
+  // via the sidebar-pages cache below. Invalidating ALL ["page-tree"] queries
+  // here refetched every open recursive subpages-embed block on each
+  // rename/icon-change — pure duplicate work. Instead patch just the affected
+  // node IN PLACE in every cached embed subtree: same visible result, no network
+  // churn, no full embed-tree rebuild. Structural events (create/move/delete)
+  // keep the blanket invalidate in their own helpers.
+  const pageTreeMatches = queryClient.getQueriesData<IPage[]>({
+    queryKey: ["page-tree"],
+  });
+  pageTreeMatches.forEach(([key, items]) => {
+    if (!items || !items.some((p) => p.id === id)) return;
+    queryClient.setQueryData<IPage[]>(key, (old) =>
+      old?.map((p) =>
+        p.id === id
+          ? {
+              ...p,
+              // Guard undefined so a title-only event can't wipe the icon (and
+              // vice versa) in the embed cache.
+              ...(title !== undefined ? { title } : {}),
+              ...(icon !== undefined ? { icon } : {}),
+            }
+          : p,
+      ),
+    );
+  });
+
   let queryKey: QueryKey = null;
   if (parentPageId === null) {
     queryKey = ["root-sidebar-pages", spaceId];
@@ -534,7 +636,14 @@ export function invalidateOnUpdatePage(
           ...page,
           items: page.items.map((sidebarPage: IPage) =>
             sidebarPage.id === id
-              ? { ...sidebarPage, title: title, icon: icon }
+              ? {
+                  ...sidebarPage,
+                  // Guard undefined so a title-only event can't wipe the icon
+                  // (and vice versa) in the sidebar-pages cache — mirrors the
+                  // embed-cache patch above.
+                  ...(title !== undefined ? { title } : {}),
+                  ...(icon !== undefined ? { icon } : {}),
+                }
               : sidebarPage,
           ),
         })),

apps/client/src/features/page/trash/components/deleted-page-banner.tsx

@@ -7,7 +7,7 @@ import { useRestorePageModal } from "@/features/page/hooks/use-restore-page-moda
 import { useDeletePageModal } from "@/features/page/hooks/use-delete-page-modal.tsx";
 import {
   useDeletePageMutation,
-  usePageQuery,
+  usePageMetaQuery,
   useRestorePageMutation,
 } from "@/features/page/queries/page-query.ts";
 import { getSpaceUrl } from "@/lib/config.ts";
@@ -25,7 +25,7 @@ type DeletedPageBannerProps = {
 export function DeletedPageBanner({ slugId }: DeletedPageBannerProps) {
   const { t } = useTranslation();
   const navigate = useNavigate();
-  const { data: page } = usePageQuery({ pageId: slugId });
+  const { data: page } = usePageMetaQuery({ pageId: slugId });
   const { data: space } = useGetSpaceBySlugQuery(page?.space?.slug);
   const spaceAbility = useSpaceAbility(space?.membership?.permissions);
   const deletedTimeAgo = useTimeAgo(page?.deletedAt);

apps/client/src/features/page/tree/components/space-tree-node-menu.tsx

@@ -1,4 +1,4 @@
-import { useAtom } from "jotai";
+import { useSetAtom, useStore } from "jotai";
 import { useTranslation } from "react-i18next";
 import { useParams } from "react-router-dom";
 import { ActionIcon, Menu, rem } from "@mantine/core";
@@ -52,7 +52,11 @@ export function NodeMenu({ node, canEdit }: NodeMenuProps) {
   const clipboard = useClipboard({ timeout: 500 });
   const { spaceSlug } = useParams();
   const { handleDelete } = useTreeMutation(node.spaceId);
-  const [data, setData] = useAtom(treeDataAtom);
+  // Setter-only: the tree value is read only imperatively inside the duplicate
+  // handler (via `store` below), never at render, so useSetAtom avoids
+  // re-rendering every row's NodeMenu on any tree event.
+  const setData = useSetAtom(treeDataAtom);
+  const store = useStore();
   const emit = useQueryEmit();
   const [exportOpened, { open: openExportModal, close: closeExportModal }] =
     useDisclosure(false);
@@ -125,8 +129,8 @@ export function NodeMenu({ node, canEdit }: NodeMenuProps) {
     try {
       const duplicatedPage = await duplicatePage({ pageId: node.id });
 
-      // figure out parent + insertion index
-      const siblings = treeModel.siblingsOf(data, node.id);
+      // figure out parent + insertion index (read the live tree imperatively)
+      const siblings = treeModel.siblingsOf(store.get(treeDataAtom), node.id);
       const parentId = siblings?.parentId ?? null;
       const currentIndex = siblings?.index ?? 0;
       const newIndex = currentIndex + 1;

apps/client/src/features/page/tree/components/space-tree-row.tsx

@@ -1,6 +1,6 @@
 import { useRef } from "react";
 import { Link, useParams } from "react-router-dom";
-import { useAtom } from "jotai";
+import { useAtom, useSetAtom } from "jotai";
 import { useTranslation } from "react-i18next";
 import { ActionIcon, rem, Tooltip } from "@mantine/core";
 import {
@@ -51,7 +51,11 @@ export function SpaceTreeRow({
   const { t } = useTranslation();
   const { spaceSlug } = useParams();
   const updatePageMutation = useUpdatePageMutation();
-  const [, setTreeData] = useAtom(treeDataAtom);
+  // Setter-only: subscribing to the whole treeDataAtom (via useAtom) re-rendered
+  // every virtualized row on any tree event, bypassing the DocTreeRow memo. This
+  // row never reads the tree value, only writes it, so useSetAtom avoids the
+  // value subscription.
+  const setTreeData = useSetAtom(treeDataAtom);
   const emit = useQueryEmit();
   const timerRef = useRef<ReturnType<typeof setTimeout> | null>(null);
   const [mobileSidebarOpened] = useAtom(mobileSidebarAtom);

apps/client/src/features/page/tree/components/space-tree.boot-cache.test.tsx

@@ -35,6 +35,7 @@ vi.mock("@/features/page/queries/page-query.ts", () => ({
     isFetching: false,
   }),
   usePageQuery: () => ({ data: undefined }),
+  usePageMetaQuery: () => ({ data: undefined }),
   fetchAllAncestorChildren: (...args: unknown[]) =>
     fetchAllAncestorChildrenMock(...args),
 }));

apps/client/src/features/page/tree/components/space-tree.expand-all.test.tsx

@@ -26,6 +26,7 @@ vi.mock("@/features/page/queries/page-query.ts", () => ({
     isFetching: false,
   }),
   usePageQuery: () => ({ data: undefined }),
+  usePageMetaQuery: () => ({ data: undefined }),
   fetchAllAncestorChildren: vi.fn(),
 }));
 

apps/client/src/features/page/tree/components/space-tree.tsx

@@ -15,7 +15,7 @@ import { notifications } from "@mantine/notifications";
 import {
   fetchAllAncestorChildren,
   useGetRootSidebarPagesQuery,
-  usePageQuery,
+  usePageMetaQuery,
 } from "@/features/page/queries/page-query.ts";
 import classes from "@/features/page/tree/styles/tree.module.css";
 import { treeDataAtom } from "@/features/page/tree/atoms/tree-data-atom.ts";
@@ -76,7 +76,7 @@ const SpaceTree = forwardRef<SpaceTreeApi, SpaceTreeProps>(function SpaceTree(
   const [isDataLoaded, setIsDataLoaded] = useState(false);
   const spaceIdRef = useRef(spaceId);
   spaceIdRef.current = spaceId;
-  const { data: currentPage } = usePageQuery({
+  const { data: currentPage } = usePageMetaQuery({
     pageId: extractPageSlugId(pageSlug),
   });
 

apps/client/src/features/page/tree/hooks/use-tree-mutation.ts

@@ -1,5 +1,5 @@
 import { useCallback } from "react";
-import { useAtom, useSetAtom, useStore } from "jotai";
+import { useSetAtom, useStore } from "jotai";
 import { notifications } from "@mantine/notifications";
 import { useTranslation } from "react-i18next";
 import { useNavigate, useParams } from "react-router-dom";
@@ -34,7 +34,10 @@ export type UseTreeMutation = {
 
 export function useTreeMutation(spaceId: string): UseTreeMutation {
   const { t } = useTranslation();
-  const [, setData] = useAtom(treeDataAtom);
+  // Setter-only: this hook never reads the tree reactively (handlers read the
+  // live value imperatively via `store` below), so useSetAtom avoids
+  // re-rendering SpaceSidebar on every tree event.
+  const setData = useSetAtom(treeDataAtom);
   // `store` reads the *current* treeDataAtom imperatively in handlers — avoids
   // stale-closure issues when the caller updates the tree (e.g. lazy-load
   // children) and then immediately invokes a handler.

apps/client/src/features/share/components/share-ai-widget.tsx

@@ -165,6 +165,13 @@ export default function ShareAiWidget({
             isStreaming={isStreaming}
             assistantName={assistantName}
             showCitations={false}
+            // Anonymous reader: suppress the tool-argument summary line so the
+            // agent's raw query/argument text isn't shown on the public share.
+            showInput={false}
+            // Anonymous reader: never paint a tool's raw errorText (it can carry
+            // internal detail). This is the render gate; the bytes are also
+            // sanitized server-side in PublicShareChatToolsService.forShare (#394).
+            showErrors={false}
             // Anonymous reader: neutralize internal/relative links in the
             // assistant's markdown so internal UUIDs/auth-gated routes don't
             // leak as clickable links (external http(s) links are kept).