From e1f3d6e0d2379d6c14712f8e1b0d10c63bec0f9c Mon Sep 17 00:00:00 2001
From: vvzvlad <git@vvzvlad.xyz>
Date: Tue, 13 Aug 2024 04:17:30 +0300
Subject: [PATCH] init

---
 .gitignore |   1 +
 apc.py     | 111 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 112 insertions(+)
 create mode 100644 .gitignore
 create mode 100644 apc.py

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..87a15c2
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+/.venv
diff --git a/apc.py b/apc.py
new file mode 100644
index 0000000..3b6ae42
--- /dev/null
+++ b/apc.py
@@ -0,0 +1,111 @@
+import subprocess
+
+def snmp_get(ip, community, oid):
+    command = f"snmpget -v2c -O v -O q -c {community} {ip} {oid}"
+    result = subprocess.run(command, shell=True, capture_output=True, text=True)
+    return result.stdout.strip().strip('"')
+
+def interpret_flags(state_string):
+    if state_string == "UNKNOWN":
+        return "NMC имеет внутреннюю проблему коммуникации с ИБП."
+    
+    flags_description = {
+        1: "Abnormal Condition Present",
+        2: "On Battery",
+        3: "Low Battery",
+        4: "On Line",
+        5: "Replace Battery",
+        6: "Serial Communication Established",
+        7: "AVR Boost Active",
+        8: "AVR Trim Active",
+        9: "Overload",
+        10: "Runtime Calibration",
+        11: "Batteries Discharged",
+        12: "Manual Bypass",
+        13: "Software Bypass",
+        14: "In Bypass due to Internal Fault",
+        15: "In Bypass due to Supply Failure",
+        16: "In Bypass due to Fan Failure",
+        17: "Sleeping on a Timer",
+        18: "Sleeping until Utility Power Returns",
+        19: "On",
+        20: "Rebooting",
+        21: "Battery Communication Lost",
+        22: "Graceful Shutdown Initiated",
+        23: "Smart Boost or Smart Trim Fault",
+        24: "Bad Output Voltage",
+        25: "Battery Charger Failure",
+        26: "High Battery Temperature",
+        27: "Warning Battery Temperature",
+        28: "Critical Battery Temperature",
+        29: "Self Test In Progress",
+        30: "Low Battery / On Battery",
+        31: "Graceful Shutdown Issued by Upstream Device",
+        32: "Graceful Shutdown Issued by Downstream Device",
+        33: "No Batteries Attached",
+        34: "Synchronized Command is in Progress",
+        35: "Synchronized Sleeping Command is in Progress",
+        36: "Synchronized Rebooting Command is in Progress",
+        37: "Inverter DC Imbalance",
+        38: "Transfer Relay Failure",
+        39: "Shutdown or Unable to Transfer",
+        40: "Low Battery Shutdown",
+        41: "Electronic Unit Fan Failure",
+        42: "Main Relay Failure",
+        43: "Bypass Relay Failure",
+        44: "Temporary Bypass",
+        45: "High Internal Temperature",
+        46: "Battery Temperature Sensor Fault",
+        47: "Input Out of Range for Bypass",
+        48: "DC Bus Overvoltage",
+        49: "PFC Failure",
+        50: "Critical Hardware Fault",
+        51: "Green Mode/ECO Mode",
+        52: "Hot Standby",
+        53: "Emergency Power Off (EPO) Activated",
+        54: "Load Alarm Violation",
+        55: "Bypass Phase Fault",
+        56: "UPS Internal Communication Failure",
+        57: "Efficiency Booster Mode",
+        58: "Off",
+        59: "Standby",
+        60: "Minor or Environment Alarm",
+    }
+
+
+    positions = [pos + 1 for pos, char in enumerate(state_string) if char == '1']
+    flags = [flags_description.get(pos, f"Flag {pos} not defined") for pos in positions]
+
+    return ", ".join(flags)
+    
+
+
+oids = {
+    "upsAdvBatteryCapacity": "1.3.6.1.4.1.318.1.1.1.2.2.1.0",
+    "upsAdvBatteryRunTimeRemaining": "1.3.6.1.4.1.318.1.1.1.2.2.3.0",
+    "upsAdvBatteryTemperature": "1.3.6.1.4.1.318.1.1.1.2.2.2.0",
+    "upsAdvOutputLoad": "1.3.6.1.4.1.318.1.1.1.4.2.3.0",
+    "upsBasicStateOutputState": "1.3.6.1.4.1.318.1.1.1.11.1.1.0",
+    "upsBasicIdentModel": "1.3.6.1.4.1.318.1.1.1.1.1.1.0"
+    
+}
+
+
+def parse_time(time_str):
+    time_parts = time_str.split(":")[-4:]
+    days = int(time_parts[0])
+    hours = int(time_parts[1])
+    minutes = int(time_parts[2])
+    seconds = float(time_parts[3])
+    total_minutes = (days * 24 * 60) + (hours * 60) + minutes + (int(seconds // 60))
+    return total_minutes
+
+
+for name, oid in oids.items():
+    response = snmp_get('10.31.41.46', 'public', oid)
+    if name == "upsBasicStateOutputState":
+        print(f"{name}: {interpret_flags(response)}")
+    elif name == "upsAdvBatteryRunTimeRemaining":
+        print(f"{name}: {parse_time(response)} minutes")
+    else:
+        print(f"{name}: {response}")